Directory Search Results

Print List

#241104019

Range of copper brazed, stainless steel heat exchangers. Available with between 4 – 70 plates (see models). Maximum working pressure: 16.0 bar. Maximum operating temperature: 99°C.

Section:
1350 Heat Exchangers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see models
Marking:
SWEO and product info on body.
Installation Requirements:
R001
Expiry date:
30/11/2029
Model:
E5T Number of plates minimum: 6 Number of plates maximum: 48 No connection type or ¾” BSP (M) E5AS Number of plates minimum: 4 Number of plates maximum: 40 No connection type or ¾” BSP (M) E5K Number of plates minimum: 8 Number of plates maximum: 40 No connection E6T Number of plates minimum: 4 Number of plates maximum: 40 No connection type, ½” or ¾” BSP (M) E8T Number of plates minimum: 4 Number of plates maximum: 40 No connection type, ½” or ¾” BSP (M) E8AS Number of plates minimum: 4 Number of plates maximum: 46 No connection type or ¾” BSP (M) E8LAS Number of plates minimum 10 Number of plates maximum: 70 No connection, ¾” or 1” BSP (M)
Product Images

Approval Holder:
SWEP International AB
Company Name
SWEP International AB
Address
Järvgatan 3B, Box 105, 26122 Landskrona
Country
Sweden

View All Listings by this Company

Print This Approval


#240602077

Range of water meters with brass bodies and plastic impellers. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN15, DN20, DN25, DN32, DN40, DN50.
Marking:
Aquamotion, WRAS and technical information on meter face. Flow arrow and size on body.
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
MJH range.

Approval Holder:
Aquamotion
Company Name
Aquamotion
Address
Unit 7 Woodland Close Mansfield Nottinghamshire
Postcode
NG21 9BF
Country
United Kingdom
Phone
01623 664030
General Email
info@aqua-motion.co.uk

View All Listings by this Company

Print This Approval


#241002081

Range of in-line water meters with brass bodies and plastic turbines. The inlets incorporate plastic filters, and the outlets incorporate non-return valves (not suitable for backflow protection). Maximum working pressure 16.0 Bar. Maximum operating temperature 65.0°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP(M), ¾” BS (M), 1¼” BSP(M), 1½” BSP(M) & 2” BSP(M).
Marking:
GWF, model code and other info on meter box
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
Sonico Nano DN15 Q3=2,5 R*** Sonico Nano DN20 Q3=2,5 R*** Sonico Nano DN20 Q3=4 R*** Body lengths DN15: 105 mm / 110mm / 115mm/ 134m / 142mm / 145mm / 160mm / 165mm / 170mm / 190mm / 220mm DN20: 105mm / 110mm / 115mm / 139mm /160mm / 165mm / 190mm / 220mm Models added October 2025: Sonico Nano DN25*** Sonico Nano DN32 *** Sonico Nano DN40*** Body lengths: DN25: 150mm/160mm/175mm/198mm*/220mm*/260mm* DN32: 150mm/160mm/200mm*/220mm*/260mm* DN40: 150mm/200mm/300mm*
Product Images

Approval Holder:
GWF AG
Company Name
GWF AG
Address
Obergrundstrasse 119 Lucerne
Postcode
6005
Country
Switzerland
Phone
+41 41 319 51 77
General Email
moritz.roettger@gwf.ch

View All Listings by this Company

Print This Approval


#2309381

Range of water meters with brass bodies and EPDM ‘O’-rings and plastic strainer on inlet. Maximum working pressure 16 bar. Cold water use only.

Section:
1505 Water Meters
Size:
1 1/4” BSP (M) 1 ½” BSP (M) 2” BSP (M)
Marking:
Resideo & technical information on dial face. Flow arrow cast on body.
Installation Requirements:
R001
Expiry date:
30/09/2028
Model:
EW1100CC2800 EW1100CC3900 EW1100CC4600 EW1100CM2800 EW1100CM3900 EW1100CM4600 - DN25, DN32 and DN40

Approval Holder:
Pittway Sarl
Company Name
Pittway Sarl
Address
A3 - ZA La Pièce 6 1180 Rolle
Country
Switzerland

View All Listings by this Company

Print This Approval


#241104025

Range of water meter manifolds with plastic bodies for use with PE80 pipe (manufactured to BS EN 12201). The inlets incorporate a spherical valve and a check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
25mm & 32mm pushfit
Marking:
Atplas logo on body.
Installation Requirements:
R001 R008
Expiry date:
30/11/2029
Model:
MB57425DU Matrix. MB5743225DU Matrix. MB5743232DU Matrix. MB57432DU Matrix. MB5743225DDCV Matrix.
Product Images

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval


#241104026

Range of water meter manifolds with plastic bodies for use with PE80 pipe (manufactured to BS EN 12201). The inlet incorporates a stop valve. Model MB77025AM Matrix Single (CV) incorporates a single check valve cartridge and model MB77025DCV Matrix Dual (DCV) incorporates two, single check valve cartridges however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
20mm, 25mm & 32mm pushfit
Marking:
Atplas logo on body.
Installation Requirements:
R001 R008
Expiry date:
30/11/2029
Model:
MB77025AM Matrix Single (CV) MB77025DCV Matrix Dual (DCV)
Product Images

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval


#240702036

Range of test port assemblies with DZR brass bodies. Maximum working pressure 25.0 Bar. Maximum operating temperature 100°C.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” ULF (15mm ULF), ½” LF (15mm LF), ½” (15mm), ¾” (20mm), 1” (25mm), 1”1/4” (32mm), 1”1/2” (40mm), 2” (50mm).
Marking:
RUBINETTERIE logo, flow arrow, thread size, DN, PN, DR and batch number on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
B-Heat - 200402.
Product Images

Approval Holder:
Rubinetterie Bresciane Bonomi S.p.A
Company Name
Rubinetterie Bresciane Bonomi S.p.A
Address
Via Massimo Bonomi, 1 Gussago (BS)
Postcode
25064
Country
Italy
Phone
+39 030 82 50 212

View All Listings by this Company
Manufacturer:
Rubinetterie Bresciane Bonomi S.p.A
Company Name
Rubinetterie Bresciane Bonomi S.p.A
Address
Via Massimo Bonomi, 1 Gussago (BS)
Postcode
25064
Country
Italy
Phone
+39 030 82 50 212

View All Listings by this Company

Print This Approval


#240702078

Range of wall mounted shower outlets (chrome plated brass bodies). Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240702078
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
VR991CP – 15mm Compression
Marking:
Intatec logo on underside of body
Installation Requirements:
R001 R040
Expiry date:
31/07/2029
Model:
S9313AA

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#241002082

Range of shower outlets (brass bodies – various finishes) incorporating a PEX lined hose as an inner pathway with an aerator type outlet. Open outlet use only. Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
241002082
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP M
Marking:
JTP on shower body
Installation Requirements:
R001 R040
Expiry date:
31/10/2029
Model:
LU4SHCH LUSHIX LU7SHBBL LU3SHBBR LU8SHMB LU1SHBRZ

Approval Holder:
Just Taps Plus UK Ltd
Company Name
Just Taps Plus UK Ltd
Address
Innovia House, Marish Wharf, St Mary's Rd, Langley
Postcode
SL3 6DA
Country
Berkshire
Phone
01895 44 22 11
General Email
info@jtpuk.co.uk

View All Listings by this Company

Print This Approval


#250102003

Range of brass ceiling mounted shower tubes, in a variety of finishes. For use with copper pipe to EN 1057. Maximum operating temperature 80.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250102003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
15mm compression x ½” male BSP
Marking:
Samuel Heath Logo on outlet connection of body
Installation Requirements:
R001 R040
Expiry date:
31/01/2030
Model:
V169-XX Xenon & V269-XX Fairfield. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, MBC = Matt Black Chrome.

Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 783 of 1012

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.