Directory Search Results

Print List

#250255033

'Weld-On 705 ECO Clear PVC cement'. Clear solvent cement. Apply as per manufacturers technical data sheet '705 ECO-09-2024'. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5560 Solvent Cements
Expiry date:
28/02/2030

Approval Holder:
IPS Corporation
Company Name
IPS Corporation
Address
445 W. Victoria Street, Compton, California 90220
Country
USA
Phone
(310) 898-3300
General Email
info@ipscorp.com

View All Listings by this Company

Print This Approval


#250304719

WC douche set including a trigger spray, flexible hose and wall outlet with stop lever. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:
0278 Bidets and associated fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Marking:
THG on fitting body.
Installation Requirements:
R001 R090 R415
Expiry date:
31/03/2030
Model:
5840/11/W Finishes: A02-Polished Chrome ; A13-Smoked Brass ; B01-Polished Nickel ; C01-Matte Nickel ; C02-Matte Chrome ; C27-Unlacquered Brass ; C47-Smoked Nickel ; D01-Light Bronze Lacquered ; D05-Lacquered Matte Bronze ; D10-USA Oil-Rubbed Bronze ; D12-Polished Brass Lacquered ; D15-Polished Black Lacquered ; D16-White Lacquered ; D18-Matte Black lacquered ; D21-Old Oil-Rubbed Bronze ; D24-Aranja ; H17-Matt Aranja ; F01-Polished Gold ; F07-Matte Gold ; F18-Rhodium Silver ; F19-Matt Rhodium Silver ; F27-Rose Gold ; F30-Soft Gold ; F31-Matte Soft Gold ; F33-Brown Bronze PVD ; F34-Matte Brown Bronze PVD ; G01-Polished Nickel/Polished Gold ; G02-Polished Chrome/Polished Gold ; H03-Lacquered Antique Silver ; H07-Varnished Matte Antique Red Copper ; H08-Lacquered Matte Antique Silver ; H24-Lacquered Antique Copper ; H28-Antique Nickel ; H49-Brass PVD ; H50-Matte Brass PVD ; H52-Gold PVD ; H53-Matte Gold PVD ; H55-Nickel PVD ; H56-Matte Nickel PVD ; H60-Matte Blush PVD ; H62-Blush PVD ; H64-Graphite PVD ; H65-Matte Graphite PVD ; H66-Umber PVD ; H67-Matte Umber PVD Styles : - 5840/11/W: G6G New Spirit ; G6H New Spirit à manettes ; G7K Soho 2023 ; G7L SOHO METAL (nouveau design) ; G7R Yoko ; G7S Yoko Color ; G7T Yoko Ice ; G7U Yoko Howlite ; G7V Yoko Delta ; G7W Yoko Delta Howlite For explanation: A complete code number compile three information’s, for example: -A02-5840/11/W (SERIE-FINISH-ARTICLE). This would give you a Bath/shower set with goliath spout, 2x ¾” valve, rim mounted mixer taps with progressive cartridge & rim mounted hand shower set in Amboise Malachite style and polished chrome finish.
Product Images

Manufacturer:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80

View All Listings by this Company

Print This Approval


#250115006

Range of deck mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies (chromium plated brass). The flow is controlled via solenoid valve which is actuated by an infra-red sensor. The temperature for the 107.6917 and 107.6918 models is controlled independently via a single lever operating member. The inlets and the outlet of the 107.6917 and 107.6918 models (main body) incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The 107.5601 and 107.5602 models have an integral soap dispenser (separate to the water pathway). The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
250115006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
107.6917 and 107.6918 models: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections. All other models: ½” BSP (M).
Marking:
Frascio on body.
Installation Requirements:
R001 R006 R007 R009 R010
Expiry date:
31/01/2030
Proviso:
R007 does not apply to the 107.6917 and 107.6918 models . R009 & R010 does not apply to the 107.5601, 107.5602 and 107.6810 models.
Model:
107.5601, 107.5602, 107.6810, 107.6917, 107.6918.
Product Images

Approval Holder:
FRASCIO (GUANGDONG) CO.,LTD
Company Name
FRASCIO (GUANGDONG) CO.,LTD
Address
19 Dongning Road, Yuewan Yungu Smart Industrial Park, #06‐17, Jianghai District, Jiangmen, Guangdong
Postcode
529040
Country
China

View All Listings by this Company

Print This Approval


#250302004

Floor standing, single hole, single outlet (fixed) combination tap assembly, (chromium plated brass body), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3). The outlet to the shower incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0466 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)
WRAS Approval Number:
250302004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Specifically for use with Dornbracht product “3594597090” which has ½” BSP (F) inlets
Marking:
Dornbracht on front of tap body
Installation Requirements:
R001 R010 R030
Expiry date:
31/03/2030
Model:
25863671
Product Images

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#250302024

Range of deck mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies (black or chrome plated brass). The flow is controlled via solenoid valve which is actuated by an infra-red sensor and the temperature is controlled independently via a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0685 Combination Tap Assembly
Section Subtitle:
Tap(s) with a non-touch method of flow control incorporating temperature control.
WRAS Approval Number:
250302024
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
Delabie on spout
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/03/2030
Model:
388035 - 3/8" BSP (M) 398035- 3/8" BSP (M) 488035 - 3/8" BSP (M) 498035 - 3/8" BSP (M) 388MCHB - 3/8" BSP (M) 398MCHB - 3/8" BSP (M) 488MCHB - 3/8" BSP (M) 498MCHB - 3/8" BSP (M) 38801515 – 15mm compression 39801515 – 15mm compression 48801515 – 15mm compression 49801515 – 15mm compression 388MCHLH15 – 15mm compression 398MCHLH15 – 15mm compression 488MCHLH15 – 15mm compression 498MCHLH15 – 15mm compression 378MCH15 - 3/8" BSP (M) 37801515 – 15mm compression 378MCHB- 3/8" BSP (F) 378035 - 3/8" BSP (M)
Product Images

Manufacturer:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 775 of 802

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.