Directory Search Results

Print List

#240902065

Range of ‘Thermowatt’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
RT – 1.1/4” BSP (M) to 2.1/4” BSP (M) RF – 48 mm OD
Marking:
Thermowatt logo, Model, Voltage, Size and other information on cap.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
Model Code: XXYZS Where XX denotes the boss type and can be replaced with any of the following: RT = Thread Type RF = Flange Type Where Y denotes the heating tube material and can be replaced with any of the following: 1 = Copper 2 = AISI 304 / AISI 304L 3 = AISI 321 4 = AISI 316 / AISI 316L 5 = Alloy 800 / Alloy 825 / Alloy 840 6 = Titanium 7 = AISI 309S 8 = AISI 310 Where Z denotes the brazing system and can be replaced with any of the following: A = Tin Alloy B = Silver Alloy C = Itek Brazing Where S denotes the surface enamelling and can be replaced with either of the following: S = Enamelled Blank = Not Enamelled

Approval Holder:
Thermowatt S.p.A.
Company Name
Thermowatt S.p.A.
Address
Via San Giovanni Battista 21 Arcevia
Postcode
60011
Country
Italy
Phone
+39 0731988246
General Email
thermowatt@legalmail.it

View All Listings by this Company

Print This Approval


#240902708

`Prox’ and ‘Wave` ranges of sensor operated flow control devices incorporating a normally closed solenoid valve to control the flow and operated via an infra-red sensor. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8 Bar Maximum operating temperature 65°C

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
10mm Spigot inlet x 1/2" BSP (M) outlet
Marking:
Y Stern logo on sensor unit
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
Prox Sensor Range: 620200 620000 620700 Wave Sensor Range: 620420 620500 620810

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#240904713

Range of leak detection devices incorporating a DZR brass body and non-return valve (not intended for and not suitable for backflow protection). Models Stopleak 1 & Stopleak 2 incorporate a spherical valve. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
240904713
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
This product has not been tested or approved for leak detection claims made by the approval holder.
Size:
Please refer to model.
Marking:
RBM, flow arrow, PN & CR on body. RBM and product info on control unit.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
Stopleak 1: ¾” BSP (M) Stopleak 2: 1” BSP (M) Stopleak 3: 1” BSP (M) x ¾” BSP (M) reducer

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#240704056

Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
Company logo, Made in Italy, temperature and pressure cast on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
54DM15000 & 54DM15000XX Stopshock xx (Packaging variation)

Approval Holder:
Barberi Rubinetterie Industriali Srl
Company Name
Barberi Rubinetterie Industriali Srl
Address
Via Monte Fenera 7 13018 Valduggia Italy
Phone
+39 163 48 284
General Email
barberi@barberi.it

View All Listings by this Company

Print This Approval


#240702045

Range of positive displacement diaphragm pumps with plastic bodies, EPDM ‘O’-rings and TPE diaphragm. The product incorporates an integral bypass relief valve. For use with John Guest LLDPE Pipe. Maximum working pressure 12.0 Bar. Maximum operating temperature 40.0°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240702045
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
5/16" Push fit, 3/8" Push fit.
Marking:
Aquatec name and logo, model number, serial number and date of manufacture (DD/MM/YY) on adhesive label on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
535X-2XXW-XXXX, 537X-2XXW-XXXX. Model Code Denotes: 1st & 2nd designators = 53 - Series Demand Delivery Pumps. 3rd designator is port size for pumphead housing, where ‘5’ = 3/8” or ‘7’ = 5/16” . 4th designator is cam angle for flow performance variation only. X can be 0 to 9. 5th designator ‘2’ indicates that pump has bypass relief control. 6th designator is for pressure setting of relief valve. X can be A to Z depending on pressure setting. 7th designator ‘X’ is a code for the specific materials in this model, e.g. Nylon pumphead housing. 8th designator ‘W’ = WRAS Compliant 9th - 12th designators XXXX can be any alphanumeric characters to denote electrical motor and motor mounting base plate combination.

Approval Holder:
Aquatec International Inc
Company Name
Aquatec International Inc
Address
17422 Pullman Street, Irvine, CA 92614, U.S.A.

View All Listings by this Company
Manufacturer:
Aquatec International Inc
Company Name
Aquatec International Inc
Address
17422 Pullman Street, Irvine, CA 92614, U.S.A.

View All Listings by this Company

Print This Approval


#240904711

Range of single stage booster pumps incorporating a flow switch. Model 46349 CH 12-14 B is supplied with a pressure vessel and incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with a strainer and stainless-steel braided EPDM lined flexible connection hoses. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240904711
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to model.
Marking:
Stuart Turner and technical information on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
30/09/2029
Model:
46387 CH 9-14 FL CH Single Stage Automatic Flow Switch: 1” BSP (M). 46349 CH 12-14 B CH Single Stage Boostamatic: 1” BSP (F).

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company
Manufacturer:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval


#240902064

EASO range of shower head and hand showers, with ABS bodies and chromium plated finish. Open outlet use. Maximum operating temperature - 65 °C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240902064
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M). 1/2" BSP (F) - (models 11102315 and 11102275 only).
Marking:
EASO and WRAS on Face of shower head – models 11102315 and 11102275 only. EASO and WRAS on base of hand shower – All Other.
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
11102315 – Overhead shower, 11102275 – Overhead shower, 11101050 – Hand shower, 1110104901 – Hand shower, 1110104902 – Hand shower, 11101208 – Hand shower, 11101253 – Hand shower, 11101301 – Hand shower, 11101191 – Hand shower, 1110110501 – Hand shower, 1110110502 – Hand shower, 11101346 – Hand shower, 11101276 – Hand shower, 11101328 – Hand shower, 11101192 – Hand shower, 11101355 – Hand shower, 11101324 – Hand shower, 11101368 – Hand shower.

Approval Holder:
Xiamen EASO Co., Ltd.
Company Name
Xiamen EASO Co., Ltd.
Address
4-5th Floor, No. 1020, Guankou Middle Road, Jimei District, Xiamen City, Fujian Province, 361023
Country
China

View All Listings by this Company

Print This Approval


#2311375

shower handset with chrome plated body. Open outlet use only Maximum operating temperature 85°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2311375
Size:
½” BSP (M)
Marking:
Aqualisa on Body
Installation Requirements:
R001 R040
Expiry date:
30/11/2028
Model:
707552 75mm Shower Handset Chrome AL250 Square

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2301103

Shower handset with plastic body. Maximum operating temperature 85C Open outlet use only

Non-metallic materials and components comply with BS6920 at 70°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2301103
Note:
Open outlet use only.
Size:
½” BSP (M).
Marking:
Aqualisa on body
Installation Requirements:
R001 R040
Expiry date:
31/01/2028
Model:
704314 65MM SINGLE MODE HANDSET AL064 - SQUARE

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#240903005

Chrome plated brass shower handset. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240903005
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
HERITAGE ON THE HANDSET
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
THC24 THA24

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 740 of 1179

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.