Directory Search Results

Print List

#251102034

Single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assembly (brass bodies – various finishes) incorporating ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
251102034
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections
Marking:
Villeroy & Boch on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2030
Model:
TVB116001000XX Where XX denotes the finish and can be replaced with any of the following: 61 – Chrome K5 - Matt black 76 - Brushed gold 64 - Brushed nickel

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#251108012

Single hole, bidet combination tap assembly (stainless steel body -various finishes) incorporating a fixed spout with swivel nozzle. The products incorporate a ceramic cartridge headwork with single lever operating member and the spout outlets a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
251108012
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
PA braided PEX lined flexible hose assemblies with ½” BSP captive nut end connections.
Marking:
BAGNODESIGN on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2030
Model:
BDM-STU-310-XX. XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#251102302

Section:
0440 Headworks
Description:
A Range of Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
Plastic body/bodies
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001
Expiry date:
30/11/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
30 122 100NANA16 bar70 °CHGon the bodyYesCeramic cartridgeNot ApplicableNot Applicable
30 122 101NANA16 bar70 °CHGon the bodyYesCeramic cartridgeNot ApplicableNot Applicable
30 579 600NANA16 bar70 °CHGon the bodyYesCeramic cartridgeNot ApplicableNot Applicable
30 333 001NANA16 bar70 °CHGon the bodyYesCeramic cartridgeNot ApplicableNot Applicable
30 746 700NANA16 bar70 °CHGon the bodyYesCeramic cartridgeNot ApplicableNot Applicable
30 746 702NANA16 bar70 °CHGon the bodyYesCeramic cartridgeNot ApplicableNot Applicable

Notes & Further Information

30 122 100 - Diameter= 25,4mm 30 122 101 - Diameter= 25,4mm 30 333 001 - Diameter= 25,4mm 30 746 700 - Diameter= 25,4mm 30 746 702 - Diameter= 25,4mm 30 579 600 - Diameter= 25,4mm


Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#251112302

Section:
0440 Headworks
Description:
A Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
Plastic body/bodies
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001
Expiry date:
30/11/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
M28DF-228mm5 bar85 °CSHANHUBODYNo1/4 Turn ceramic disk

Approval Holder:
ZHEJIANG CORAL SANITARY CO., LTD
Company Name
ZHEJIANG CORAL SANITARY CO., LTD
Address
KEYUAN ROAD NO.23.HUXIN INDUSTRIAL AREA CHUMEN TOWN, YUHUAN CITY, 317600
Postcode
317605
Country
China
Phone
0086-15888667668
General Email
wendy@coralbathroom.com

View All Listings by this Company
Manufacturers:
ZHEJIANG CORAL SANITARY CO., LTD

Print This Approval


#251112021

Range of quarter turn ceramic disc headworks incorporating brass bodies (HW-12, HW -34, HW - 38) or plastic body (HP-12). Maximum working pressure 12 Bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
251112021
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
CITEC on body
Installation Requirements:
R001
Expiry date:
30/11/2030
Model:
HP-12 G1/2” (M) HW-12 G1/2” (M) HW-34 G3/4” (M) HW-38 G3/8” (M)

Approval Holder:
Kaiping Citec Sanitary Components Co.,Ltd.
Company Name
Kaiping Citec Sanitary Components Co.,Ltd.
Postcode
529300
Country
China
Phone
750 2761910
General Email
helenguan@kcitec.com

View All Listings by this Company
Manufacturer:
Kaiping Citec Sanitary Components Co.,Ltd.
Company Name
Kaiping Citec Sanitary Components Co.,Ltd.
Postcode
529300
Country
China
Phone
750 2761910
General Email
helenguan@kcitec.com

View All Listings by this Company

Print This Approval


#251104008

Range of thermostatic cartridges incorporating plastic bodies and stainless-steel filters. For insertion into specifically dimensioned bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
0442 Thermostatic cartridges
Section Subtitle:
Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:
251104008
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Manufacturer diameter 31mm to 32mm.
Marking:
Vernet France on body.
Installation Requirements:
R001
Expiry date:
30/11/2030
Model:
CA43-060, CA43-095, CA43-089, CA43-054, CA43-078, CA43-045, CA43-063, CA43-071, CA43-072, CA43-090, CA43-091, CA43-102, CA43-098, CA43-109, CA43-105, CA43-075, CA43-059, CA43-058, CA43-068, CA43-066, CA43-069, CA43-076, CA43-057, CA43-065, CA43-067, CA43-101, CA43-077, CA43-073, CA43-061, CA43-064, CA43-086, CA43-087, CA43-062.

Approval Holder:
VERNET GROUP
Company Name
VERNET GROUP
Address
21-27 route d’Arpajon Ollainville – BP31 ARPAJON
Postcode
91291
Country
France
General Email
roze@vernet.fr

View All Listings by this Company

Print This Approval


#251102703

Single hole, single outlet (swivel) pull down spray combination tap assembly (chromium plated brass body) with a ceramic cartridge headwork and single lever operating member. The product incorporates a pull-down spray with a plastic aerator, which also incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
251102703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless Steel and polyamide braided PEX lined flexible hose assemblies incorporating 1/2" BSP captive nut end connections.
Marking:
Grohe logo on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2030
Model:
30.648.xxx Where xx1 denotes finish, can be replaced by: 001 – Chrome

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#251103302

Section:
0450 Combination Tap Assemblies
Description:
A Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted stainless-steel braided EPDM lined inlet hoses Capable of Achieving AUK3 Tap Gap Click type waste (not verified by test)
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout OutletWastes Includes
KM FRZ BAS3.5 CChrome15mm compression5 bar65 °CBristanOperating memberNoCeramic cartridgeC-plateAeratorClick TypeFlow Regulator Fitted,

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#251116301

Section:
0450 Combination Tap Assemblies
Description:
A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted Capable of achieving AUK3 Tap Gap Stainless steel braided, PEX lined inlet hoses
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
681104chrome½” BSP (F)5 bar60 °CKINENOn handleNoCeramic CartridgeC-plateAerator
681101chrome½” BSP (F)5 bar60 °CKINENOn handleNoCeramic CartridgeC-plateAerator
691104chrome½” BSP (F)5 bar60 °CKINENOn handleNoCeramic CartridgeC-plateAerator
691101chrome½” BSP (F)5 bar60 °CKINENOn handleNoCeramic CartridgeC-plateAerator
891105-1chrome½” BSP (F)5 bar60 °CKINENOn handleNoCeramic CartridgeC-plateAerator
Product Images

Approval Holder:
Guangdong Kinen Sanitary Ware Industrial Co., Ltd.
Company Name
Guangdong Kinen Sanitary Ware Industrial Co., Ltd.
Address
No.57, Sijiu Road, Zhishan Town, Heshan City, Guangdong
Country
China

View All Listings by this Company
Manufacturers:
Guangdong Kinen Sanitary Ware Industrial Co., Ltd.

Print This Approval


#251102015

Range of single hole, single outlet fixed combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
251102015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The products are supplied with a lever type pop up waste set – not verified by test.
Size:
Stainless steel braided, PEX lined flexible hose assemblies incorporating 1/2” BSP (F) captive nut end connections (models 24.262.xx1 & 24.324.xx1 only). Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections (all models excluding 24.262.xx1 & 24.324.xx1)
Marking:
Grohe on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2030
Model:
23.262.xx1 24.316.xx1 32.734.xx1 24.317.xx1 24.256.xx1 24.318.xx1 24.262.xx1 24.324.xx1 24.265.xx1 24.325.xx1 24.266.xx1 24.267.xx1 24.326.xx1 24.273.xx1 24.331.xx1 where xx1 denotes finish, and can be replaced by: 001 – Chrome DC1 – Supersteel DA1 – Warm sunset AL1 – Brushed hard graphite GL1 – cool sunrise

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 8 of 30

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.