"PRESSTITE" range of press fittings with nickel plated brass bodies incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved by a TH crimping profile. For above ground use only. Maximum working pressure 10.0 bar. 20 & 26mm pressfit sizes cold water use only. Threaded and pressfit 16mm size maximum operating temperature 95°C. From June 2025: The 20 & 26mm pressfit sizes maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404724

Size:

Pressfit: 16, 20 & 26mm. Threaded: ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Straight PEX x PEX (press x press): 900310002 - 16mm x 16mm 900310003 - 20mm x 20mm 900310004 - 26mm x 26mm Reduce Straight PEX x PEX (press x press): 900310032 - 20mm x 16mm 900310042 - 26mm x 16mm 900310043 - 26mm x 20mm Straight PEX x Female (press x female): 900312003 - 20mm x 1/2"F 900312004 - 26mm x 3/4"F 900312023 - 16mm x 1/2"F 900312034 - 20mm x 3/4"F 900312045 - 26mm x 1"F Stop end (press): 900372002 - 16mm 900372003 - 20mm 900372004 - 26mm Elbow (press): 900315002 - 16mm 900315003 - 20mm 900315004 - 26mm Elbow PEX x Male (press x male): 900316023 - 16mm x 1/2"M 900316003 - 20mm x 1/2"M 900316034 - 20mm x 3/4"M 900316004 - 26mm x 3/4"M Elbow PEX x Female (press x female): 900317023 - 16mm x 1/2"F 900317003 - 20mm x 1/2"F 900317034 - 20mm x 3/4"F 900317004 - 26mm x 3/4"F Wall Plate PEX x Female (press x female): 900307023 - 16 x 1/2"F 900307003 - 20 x 1/2"F 900307034 - 20 x 3/4"F 900307004 - 26 x 3/4"F Equal Tee (press): 900318002 - 16mm 900318003 - 20mm 900318004 - 26mm Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): 900318232 - 16 x 20 x 16 900318322 - 20 x 16 x 16 900318323 - 20 x 16 x 20 900318332 - 20 x 20 x 16 900318343 - 20 x 26 x 20 900318422 - 26 x 16 x 16 900318423 - 26 x 16 x 20 900318424 - 26 x 16 x 26 900318432 - 26 x 20 x 16 900318433 - 26 x 20 x 20 900318434 - 26 x 20 x 26 900318442 - 26 x 26 x 16 900318443 - 26 x 26 x 20 900318454 - 26 x 32 x 26 Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): 900330004 - 26 x 3/4"F x 20 900330023 - 16 x 1/2"F x 16 900330033 - 20 x 1/2"F x 20 900330034 - 20 x 3/4"F x 20 900330043 - 26 x 1/2"F x 26

Approval Holder:

Hevac Ltd

Company Name

Hevac Ltd

Address

Muirfield Drive Naas Road Dublin 12

Postcode

D12 X0A3

Country

Ireland

Phone

0035 314 191924

General Email

dave.grenville@hevac.ie

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

5000 series of copper end feed fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250708026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Eagle brand logo on fitting.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

5001A 90° Street bend 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5002G 90° Bent tap Connector 15mm x ½”, 15mm x ¾”, 22mm x ¾” 5002A 90° Bend 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5040 45° Street Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5041 45° Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5085 Full Crossover 15mm, 22mm 5086 Partial Crossover 15mm, 22mm 5090 90° Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5090R 90° Elbow 22mm x 15mm 5092 90° Street Elbow 10mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm 5130 Equal Tee 8mm, 10mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm 5301 End Cap 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5130R Reducing Tee 15mmx22mmx15mm，22mmx15mmx15mm， 22mmx15mmx22mm，22mmx22mmx15mm， 22mmx28mmx22mm，28mmx15mmx15mm， 28mmx15mmx28mm，28mmx22mmx22mm， 28mmx22mmx28mm，28mmx28mmx15mm， 28mmx28mmx22mm，35mmx15mmx35mm， 35mmx22mmx35mm，35mmx28mmx28mm， 35mmx28mmx35mm，42mmx15mmx42mm， 42mmx22mmx42mm，42mmx28mmx42mm， 42mmx35mmx42mm，54mmx15mmx54mm， 54mmx22mmx54mm，54mmx28mmx54mm， 54mmx35mmx54mm，54mmx42mmx54mm 5240 Reducing Coupling 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 15mm，35mm x 22mm，35mm x 28mm， 42mm x 15mm，42mm x 22mm，42mm x 28mm， 42mm x 35mm，54mm x 22mm，54mm x 28mm 54mm x 35mm, 54mm x 42mm 5421 Metric imperial Coupling 15mm x ½”, 22mm x ¾” 5270 Straight Coupling 15mm， 22mm， 28mm, 35mm, 42mm, 54mm 5243 Fitting reducer 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 15mm，35mm x 22mm，35mm x 28mm， 42mm x 15mm，42mm x 22mm，42mm x 28mm， 42mm x 35mm，54mm x 22mm，54mm x 28mm 54mm x 35mm, 54mm x 42mm 5359G Straight Tap Connector 15mm x 1/2"，15mm x 3/4"，22mm x 3/4"

Approval Holder:

SCE Technology (Ningbo) Co.,Ltd.

Company Name

SCE Technology (Ningbo) Co.,Ltd.

Address

No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Zhejiang

Country

China

View All Listings by this Company

Range of WC dual flush drop valves with ABS bodies and silicon seals. The valves are operated via a push button assembly for either full or reduced flush and incorporate an internal, adjustable height overflow.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250702719

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet and cold water use only.

Size:

1 1/2" BSP (M) (MFV1C and MFV2C) 2" BSP (M) (MFV3C and MFV4C)

Marking:

Multikwik website and NSG3338 on body or Multikwik Website on base of flush valve

Installation Requirements:

R001 R556 R571

Expiry date:

31/07/2030

Model:

0702120 MFV1C 0702121 MFV2C 0702122 MFV3C 0702123 MFV4C

Range of WC dual flush drop valves with ABS bodies and silicone seals. The valves are operated via a two push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2311108

Size:

2” BSP (M)

Marking:

UK Bathrooms Ltd and product info on body.

Installation Requirements:

R001 R571 R580 R581

Expiry date:

30/11/2028

Model:

B218M B228 B2650

Product Images

Approval Holder:

UK Bathrooms Ltd

Company Name

UK Bathrooms Ltd

Address

Aston House Redburn Road Newcastle Upon Tyne

Postcode

NE5 1NB

View All Listings by this Company

Range of multistage centrifugal pumps with stainless steel impellers, intermediate chambers, shaft and outer sleeve. The DPV(M/S) models and DPV(S) models can also incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressures: Existing models: DPV models 10.0 bar, DPVM models with an oval flange or VME models with integral check valve 16.0 bar, All other DPVM models 25.0 bar. DPV(S) models with an oval flange or DPV(S)(E) models with integral check valve 16.0 bar, All other DPV(S) models and DPH(S)I models 25.0 bar. Maximum operating temperatures: DPHM, DPVE and DPVME models with integral check valve 60°C, all other model variants 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250302723

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DPHM 2/4/6 B: 1¼” BSP (F) inlet x 1” BSP (F) outlet. DPV(M/S)(F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. DPV(S) (F/E/V/T) 10 B/15 B/15 C: Oval flange: DN40, DN50. Round flange: DN40, DN50. External threaded: 1½” BSP (M), Victaulic: DN50 and Tri-clamp: DN50. DPV(S)F 25/40/60/85/125 B: Round flange: DN65, DN80, DN100, DN125. DPH(S)I 2/4/6 B: 1¼” BSP or NPT (F). DPH(S)I 10/15 B/C: 2” BSP or NPT (F).

Marking:

DPVF & logo, model name, PN, WRAS and technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

DPHM x yy B. Where: x = flow rate m³/h (2, 4 or 6). yy = no. of stages ranges 1-6 stages. ------------------------------------- DPV(M/S)(F/E/V/T) x yy B/C Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. No indication (V/VS only) = oval flange. F (VF/VSF) = round flange. E (VE) = external thread. V (VV/VSV) = Victaulic. T (VT/VST) = Triclamp. x = flow rate m³/h (2, 4, 6, 10, 15). yy = no. of stages DPV(M/S)(F/E/V/T)……2 B 1-30 stages. DPV(M/S)(F/E/V/T)……4/6 B 1-26 stages. DPV(S)(F/E/V/T)……10 B 1-21 stages. DPV(S)(F/E/V/T)……15 B/C 1-17 stages. -------------------------------------- DPV(S) F xx yy B. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. F (VF/VSF) = round flange. x = flow rate m³/h (25, 40, 60, 90(model 85) or 125). yy = no. of stages ……25 B 1-12 stages. ……40/60 B 1-10 stages. ……85 B 1-6 stages. ……125 B 1-4 stages. -------------------------------------- DPHI x yy = Vertically oriented (AISI 304). DPHSI x yy = Vertically oriented (AISI 316). Where: I = Inner thread connection. x = flow rate m³/h (2, 4, 6, 10 or 15). yy = no. of stages DPH(S)I 2/4/6 B 1-14 stages. DPH(S)I 10 B/15 B/15 C 1-8 stages.

Approval Holder:

Duijvelaar Pompen B.V.

Company Name

Duijvelaar Pompen B.V.

Address

Kalkovenweg 13 2401 LJ Alpen aan den Rijn

Country

Netherlands

Phone

0031 0172 488388

View All Listings by this Company