Directory Search Results

Print List

#2204505

'EUW-80'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204505
Expiry date:
30/04/2027

Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval


#2204506

'EUW-60'. Black coloured, compression moulded EPDM rubber material. Shore hardness 60. Tested in-radius size 0.9mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204506
Expiry date:
30/04/2027

Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval


#2111035

Range of concealed WC flushing cisterns with a side entry BS 1212-4(2016) float operated inlet valve providing a type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two button assembly for a 6 or 3 litre flush volume. The cistern incorporates a servicing valve and a stainless-steel braided EPDM lined flexible hose assembly installed prior to the inlet valve. Maximum working pressure 10.0 Bar, Cold Water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111035
Size:
1/2" BSP (M)
Marking:
Rongji (brand of manufacturer), model number inside cistern.
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
ET336-F ET336
Product Images

Approval Holder:
Xiamen R&J Precision Technology Co., Ltd.
Company Name
Xiamen R&J Precision Technology Co., Ltd.
Address

View All Listings by this Company
Manufacturer:
Xiamen R&J Precision Technology Co., Ltd.
Company Name
Xiamen R&J Precision Technology Co., Ltd.
Address

View All Listings by this Company

Print This Approval


#2204076

A range of spring-loaded resilient trim, in-line check valve cartridge with plastic guides and stem and EPDM seals within a plastic housing. For insertion into pipes or fittings with specifically dimensioned bores. Maximum working pressure 10.0 bar & maximum operating temperature 65°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2204076
Size:
Please refer to model.
Marking:
Size, flow arrow, AMFAG and product information on body
Installation Requirements:
R001
Expiry date:
30/04/2027
Model:
AV10 (DN6), AV14 (DN10) & AV15C (DN10).
Product Images

Approval Holder:
AMFAG S.r.l
Company Name
AMFAG S.r.l
Address
Via G. Falcone, 3 46040 - Casaloldo (MN) Italy
Phone
+39 0376 780 912
General Email
sales@amfagairforce.com

View All Listings by this Company
Manufacturer:
AMFAG S.r.l
Company Name
AMFAG S.r.l
Address
Via G. Falcone, 3 46040 - Casaloldo (MN) Italy
Phone
+39 0376 780 912
General Email
sales@amfagairforce.com

View All Listings by this Company

Print This Approval


#2207326

Range of spring loaded, resilient trim, in-line check valve cartridges, with EPDM seals and O-rings within a brass valve body and plastic insert body. For insertion in pipes and fittings with specifically sized bores. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2207326
Size:
DN15
Marking:
59369 & 59742: Caleffi logo, 59742, DN15, EBJ, flow arrow, NF, WRAS, DVGW stamped on body 59639/B: Caleffi logo, 59369B, DN15, EBJ, flow arrow, NF, WRAS, DVGW stamped on body
Installation Requirements:
R001
Expiry date:
31/07/2027
Model:
59639 DN15 59639/B DN15 59742 DN15
Product Images

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#2204073

Range of low flow rate tap regulators and spray changers, comprising of an EPDM ‘O’-ring, with a stainless-steel strainer housed within a brass body with chrome plated brass trim piece. Maximum working pressure Open outlet use. Maximum operating temperature 85.0°C

Section:
0435 Taps and shower valves - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2204073
Size:
OD 15mm
Marking:
ALTERED logo on body
Installation Requirements:
R001 R040
Expiry date:
30/04/2027
Model:
Altered:Nozzle Dual Flow Pro (article number: 1001) Altered:Nozzle Single Flow Dome (article number: 1002) Altered:Nozzle Single Flow Spray (article number: 1003) Available in 3 options: Standard – this size fits Female M22x1 and Male M24x1 housing Junior – this size fits US Female 3/4"–27 UNS-2B and US Male 13/16"–27 UNS-2A housing Tom Thumb – this size fits Female M16x1 and Male M18x1
Product Images

Approval Holder:
Altered Stockholm AB
Company Name
Altered Stockholm AB
Address
Drottninggatan 59 SE-11121 Stockholm
Country
Sweden

View All Listings by this Company

Print This Approval


#2204318

Range of ceramic cartridge headworks with plastic bodies and EPDM rubber ‘O’-rings for insertion into specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
2204318
Size:
see model
Marking:
HENT and WRAS on body
Installation Requirements:
R001
Expiry date:
30/04/2027
Model:
D25PK 29.99mm OD D35G 34.69mm OD D35GK 34.75mm OD D35PK 34.75mm OD D40PK 39.71mm OD D25PKX 29.99mm OD D35GX 34.69mm OD D35GKX 34.75mm OD, D35PKX 29.99mm OD D40PKX 39.71mm OD
Product Images

Approval Holder:
Guangdong Hent Technology Co., Ltd
Company Name
Guangdong Hent Technology Co., Ltd
Address
No. 28 Pingsha Dadao Zhishan Industrial Area Heshan City 529729 Guangdong
Country
China

View All Listings by this Company
Manufacturer:
Guangdong Hent Technology Co., Ltd
Company Name
Guangdong Hent Technology Co., Ltd
Address
No. 28 Pingsha Dadao Zhishan Industrial Area Heshan City 529729 Guangdong
Country
China

View All Listings by this Company

Print This Approval


#2204332

Range of push to open, push to close headworks with plastic bodies and EPDM ‘O’-rings. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
2204332
Size:
26.93mm Ø
Marking:
Hansgrohe on body
Installation Requirements:
R001
Expiry date:
30/04/2027
Model:
30741300 30184700
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2204048

Range of thermostatic cartridges with brass or plastic bodies (see model) and EPDM ‘O’-rings. The GR-FX-02S, 03SC, 10T, 11T, X02S, X02T & X05 models incorporate a stainless-steel strainer. For insertion into specifically dimensioned bores. Maximum operating temperature 75°C.

Section:
0442 Thermostatic cartridges
Section Subtitle:
Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:
2204048
Size:
see model
Marking:
GUOREN on body.
Installation Requirements:
R001
Expiry date:
30/04/2027
Model:
Plastic bodies: GR-FX-02S: OD 30.5mm, GR-FX-03SC: OD 32.5mm, GR-FX-D09: OD 53mm, GR-FX-D10: OD 52.5mm, GR-FX-X02S: OD 24.5mm. Brass bodies: GR-FX-10T: 1” BSP (M), GR-FX-11T: OD 32.5mm, GR-FX-17T: 1” BSP (M), GR-FX-18T: OD 33mm, GR-FX-X02T: OD 24.5mm, GR-FX-X01: ½” BSP (M), GR-FX-X05: 3/4” BSP (M).
Product Images

Approval Holder:
Taizhou Guoren Thermostatic Sanitaryware Co., Ltd.
Company Name
Taizhou Guoren Thermostatic Sanitaryware Co., Ltd.
Address
No.108 Minhe Road, Zeguo Town, Wenling City, Zhejiang Province
Country
China

View All Listings by this Company
Manufacturer:
Taizhou Guoren Thermostatic Sanitaryware Co., Ltd.
Company Name
Taizhou Guoren Thermostatic Sanitaryware Co., Ltd.
Address
No.108 Minhe Road, Zeguo Town, Wenling City, Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval


#2206038

Range of thermostatic cartridges with plastic bodies and EPDM ‘O’-rings. All models incorporate a plastic strainer. For insertion into specifically dimensioned bores. Maximum working pressure 16 bar. Maximum operating temperature 60°C.

Section:
0442 Thermostatic cartridges
Section Subtitle:
Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:
2206038
Size:
Please refer to model.
Marking:
Hansgrohe on body (3/4” BSP male models are marked underneath the nut on the body)
Installation Requirements:
R001
Expiry date:
30/06/2027
Model:
30 122 090 - OD 30mm 31 122 020 - ¾” BSP male 31 122 030 - ¾” BSP male 31 122 040 - OD 30mm 31 122 050 - ¾” BSP male 31 122 060 - ¾” BSP male 31 122 070 - ¾” BSP male 31 122 080 - ¾” BSP male
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 69 of 221

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.