Directory Search Results

Print List

#2307336

Range of dual flush WC outlet valves. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Cold Water Use

Section:
1305 Valves
Section Subtitle:
Flushing valve(s) for WC Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2307336
Size:
2” BSP (M) Inlet.
Marking:
Geberit Laser etched on the body.
Installation Requirements:
R001 R571 R581
Expiry date:
31/07/2028
Model:
Geberit Type 260 826.470.00.0 - standard version & Geberit Type 260 826.485.00.0 - short version.

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2309028

Range of urinal flushing mechanisms incorporating nylon bodies and a solenoid valve which controls the flow and is actuated via an infra-red sensor. The inlet of the solenoid valve incorporates a stainless-steel strainer. Maximum working pressure 5.0 bar. Cold water use only.

Section:
1307 Valves
Section Subtitle:
Flushing valve mechanism(s) for Urinals
WRAS Approval Number:
2309028
Size:
¾” BSP (F)
Marking:
Delabie on Sensor.
Installation Requirements:
R001 R075 R090
Expiry date:
30/09/2028
Model:
Tempomatic 4 Urinal 430SBOX - Recessed waterproof housing, mains supply 430000 wall plate 430010 wall plate 430020 wall plate 430030 wall plate 430PBOX - Recessed waterproof housing, battery supply 430006 wall plate 430016 wall plate 430026 wall plate 430036 wall plate

Approval Holder:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company
Manufacturer:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

Print This Approval


#2309044

Range of wall mounted combination boilers providing domestic hot water via a heat exchanger and pressurised central heating system. The products can be supplied with a rigid or flexible filling loop or keyless filling link. The flexible and rigid filling loops incorporate a flexible hose or copper pipe, isolation valve, double check valve assembly (suitable for back flow protection against fluid category 3). The keyless filling link incorporates a CAB backflow prevention device (suitable for back flow protection against fluid category 3). The products also incorporate an expansion vessel and pressure relief valve set at 3.0 bar. Maximum working pressure of primary circuit 2.5 bar. Maximum operating temperature of primary circuit 85°C Maximum working pressure of secondary circuit 8.0 bar Maximum operating temperature of secondary circuit 60°C

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2309044
Note:
When installing the keyless filling link, the discharge from the relief outlet port of this fitting must be made via a type AA, AB or AD air gap, or in accordance with EN 1717.
Size:
¾” BSP (M) (primary circuit). ½” BSP (M) (secondary circuit).
Marking:
Baxi on front cover.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2028
Model:
7796586 BAXI 624 COMBI 2 7796587 BAXI 630 COMBI 2 7796588 BAXI 636 COMBI 2 7813609 BAXI 624 COMBI LPG 2 7814304 BAXI 824 COMBI 2 7814305 BAXI 830 COMBI 2 7814306 BAXI 836 COMBI 2 7814307 BAXI 830 COMBI LPG 2 7814308 BAXI 836 COMBI LPG 2 7814309 BAXI ASSURE 524 COMBI 2 7814310 BAXI ASSURE 530 COMBI 2 7814311 BAXI ASSURE 536 COMBI 2 7814312 BAXI ASSURE 530 COMBI LPG 2

Approval Holder:
Baxi Heating UK Limited
Company Name
Baxi Heating UK Limited
Address
Brooks House, Coventry Road, Warwick
Postcode
CV34 3LL

View All Listings by this Company

Print This Approval


#2307329

Preheat accessory assembly for connection to the domestic hot water circuit of a combination boiler. Incorporates flow sensor, flow restrictor, flow silencers, pre-heat sensor and filter. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1478 Heater
Section Subtitle:
Combination boilers - accessories and components.
WRAS Approval Number:
2307329
Size:
15mm compression.
Marking:
Bosch and date of manufacture (MM/YY).
Installation Requirements:
R001
Expiry date:
31/07/2028
Model:
7-716-192-735: GREENSTAR CDI COMPACT ERP DHW Solar Pre-Heat Kit.

Approval Holder:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company
Manufacturer:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company

Print This Approval


#2401701

Range of water meters with black epoxy coated bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1505 Water Meters
Size:
DN 50 - DN 200 flanged.
Marking:
Diehl , Hydrus and product info on housing.
Installation Requirements:
R001
Expiry date:
31/01/2029
Model:
HYDRUS 2.0 BULK Type 174 Series. DN50 lengths 200 / 270 / 300 DN65 lengths 200 / 300 DN80 lengths 200 / 225 / 300 / 350 DN100 lengths 250 / 350 / 360 DN125 length 250 DN50 lengths 300 rotatable flanges DN65 lengths 300 rotatable flanges DN80 lengths 350 rotatable flanges DN100 lengths 350 rotatable flanges DN150 lengths 300 / 500 DN 200 lengths 350

Approval Holder:
Diehl Metering GmbH
Company Name
Diehl Metering GmbH
Address
67 rue du Rhône 68300 Saint-Louis
Country
France

View All Listings by this Company
Manufacturer:
Diehl Metering GmbH
Company Name
Diehl Metering GmbH
Address
67 rue du Rhône 68300 Saint-Louis
Country
France

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 676 of 1774

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.