Range of undercounter and passthrough commerical dishwashers with flow controlled by a solenoid valve and discharged via a type AB air gap (verified by test - suitable for backflow protection against fluid category 5). The inlet hose incorporates a stainless steel strainer. Maximum working pressure 4.0 bar. Maximum operating temperature 55°C.

Section:

2390 Washing Machines

Section Subtitle:

Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2203319

Size:

¾” BSP (F) Captive nut

Marking:

Sammic SL, manufacturers address, model, serial number, date of manufacture (MM/YYYY) and other technical information on Adhesive label on right panel.

Installation Requirements:

R001 R009 R574

Expiry date:

31/03/2027

Model:

Undercounter: AX-51 BC AX-51 BCD UX-50 C UX-50 SC UX-50 BC UX-50 SBC UX-50 BCD UX-50 SBCD Passthrough: AX-100 BC AX-100 BCD UX-120 C UX-120 SC UX-120 BC UX-120 SBC UX-120 BCD UX-120 SBCD Models added April 2025; Passthrough: UX-130 C UX-130 SC UX-130 BC UX-130 SBC UX-130 BCD UX-130 SBCD UX-150 C UX-150 SC UX-150 BC UX-150 SBC UX-150 BCD UX-150 SBCD Utensil: UX-600 C UX-600 BC UX-750 C UX-750 BC UX-1300 C UX-1300 BC

Product Images

Approval Holder:

Sammic S.L.

Company Name

Sammic S.L.

Address

C/Basarte 1 20720 Azkoitia (Gipuzkoa) Spain

Phone

Tel: +94 315 7234 Fax: +94 381 2883

View All Listings by this Company

Range of UV disinfection units incorporating 316L stainless steel bodies and quartz sleeves. Maximum working pressure 10.0 bar. Maximum operating temperature 35°C.

Section:

2411 Disinfection Equipment

Size:

DN150, DN200, DN250, DN300, DN350 & D400 flanged connections

Marking:

Bio-UV logo, model, date of manufacture (DD/MM/YYYY) and technical information on adhesive label on electrical cabinet. Bio-UV and other technical information on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170 R290 R511

Expiry date:

30/09/2026

Model:

‘IAM’ range of models: IAM2273 300W IAM4273 300W IAM6273 300W IAM4273 400W IAM6273 400W IAM8323 400W IAM6355 800W IAM8406 800W

Approval Holder:

Bio-UV group

Company Name

Bio-UV group

Address

850 avenue Louis Médard Lunel

Postcode

34400

Country

France

Phone

+ 33 (0)4 26 89 98 77

General Email

dedet@bio-uv.com

View All Listings by this Company

Manufacturer:

Bio-UV group

Company Name

Bio-UV group

Address

850 avenue Louis Médard Lunel

Postcode

34400

Country

France

Phone

+ 33 (0)4 26 89 98 77

General Email

dedet@bio-uv.com

View All Listings by this Company

'IUPITAL F10-EW2 NATURAL'. Natural (appears white), injection moulded POM material. For use with water up to 85°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2202532

Expiry date:

28/02/2027

Approval Holder:

Global Polyacetal Co., Ltd.

Company Name

Global Polyacetal Co., Ltd.

Address

Shiodome Sumitomo-Building 25F 1-9-2, Higashi-shinbashi, Minato Ward, Tokyo 105-0021

Country

Japan

View All Listings by this Company

`3M™ Scotchkote™ Fusion-Bonded Epoxy Coating 134`. Factory applied, green coloured, epoxy coating. Pre-heat substrate to 232°C, before dip coating as per manufacturer’s data sheet and application guide ‘78-8141-8528-2 Rev A’ dated February 2016, for 3 seconds. Cure for 10 minutes at 232°C. For use with water up to 23°C. This material is only approved for the application and curing conditions that appear on the approval. If the application and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2110554

Expiry date:

31/10/2026

Approval Holder:

3M United Kingdom Plc.

Company Name

3M United Kingdom Plc.

Address

Cain Road, Bracknell. Berkshire.

Postcode

RG12 8HT

View All Listings by this Company

Resicoat factory applied, epoxy powder coatings. The coatings are electrostatically applied by spray onto a panel pre-heated for 15 minutes@225°C and then post cured for 15 minutes@220°C. For use with water up to 85°C. The following grades are manufactured at GERMANY, REUTLINGEN: Resicoat R4 blue: R4-ES HJ601R, R4-ES HJ605R, R4-ES HJ606R, R4-FB HJC04R, R4-FB HJC06R, R4-FB HJC08R, R4-FB HJC12R, R4-FB HJC33R, R4-FB HJC34R, R4-FB HJC36R, R4-ES HJF01R, R4-ES HJF09R, R4-ES HJF10R, R4-ES HJF13R PAM blue, R4-ES HJF14R, R4-ES HJF22R, R4-ES HJF23R, R4-ES HJF24R, R4-ES HJF26R, R4-ES HJF42R, R4-ES HJG05R, R4-ES HJG07R, R4-ES HJG08R, R4-ES HJH01R & R4-FB HJC26R. Resicoat R4 red/red-brown: R4-FB HGC07R, R4-FB HGC17R, R4-ES HGF03R, R4-ES HGF04R, R4-ES HGF10R, R4-ES HGF17R, R4-ES HGF20R, R4-ES HGH02R. Resicoat R4 black: R4-ES HNF04R & R4-FB HNC01R. Resicoat R4 green: R4-FB HKC71R. Resicoat R8 blue: R8-ES HJF97R, R8-FB HJC37R, R8-FB HJC38R, R8-ES HJG13R, R8-FB HJC50R, R8-FB HJC51R, R8-FB HJC52R, R8-FB HJC53R, R8-FB HJC54R, R8-ES HJF1KR, R8-ES HJF2KR, R8-ES HJF3KR, R8-ES HJF4KR, R8-ES HJF5KR, R8-ES HJF6KR, R8-ES HJG29R & R8-ES HJ609R. Resicoat R8 blue grades added in July 2024: R8-FB HJC55R, R8-ES HJF4MR & R8-ES HJF5LR. Resicoat R8 red/red-brown: R8-FB HGC12R, R8-ES HGF66R, R8-ES HGF67R & R8-ES HGF68R. Resicoat R8 red added in February 2025: R8-ES HGF65R. Resicoat R8 black: R8-ES HNC03R & R8-ES HNF43R. Resicoat R2 blue: R2-ES HJF5BR & R2-ES HJF4ER. The following grades are manufactured at USA, NASHVILLE: Resicoat R4 blue: R4-ES HJ606R, R4-ES HJF10R, R4-ES HJF24R & R4-ES HJF42R. Resicoat R4 red/red-brown: R4-FB HGC17R & R4-ES HGF17R. Resicoat R4 green: R4-ES HKF47R. The following grades are manufactured at CHANGZHOU, CHINA: Resicoat R2 blue: R2-ES HJF5BR. Resicoat R4 blue: R4-FB HJC03R, R4-FB HJC06R, R4-FB HJC08R, R4-FB HJC15R, R4-FB HJC23R, R4-FB HJC29R, R4-ES HJF01R, R4-ES HJF10R, R4-ES HJF13R, R4-ES HJF14R, R4-ES HJF22R, R4-ES HJF24R & R4-ES HJF42R. Resicoat R4 red/red-brown: R4-ES HGF03R, R4-ES HGF04R & R4-ES HGF17R. Resicoat R4 black: R4-ES HNF04R. Resicoat R8 blue grades added in February 2025: R8-FB HJC50R, R8-ES HJF3KR, R8-ES HJF97R The following grades are manufactured at IZMIR, TURKEY: Resicoat R2 blue: R2-ES HJF3D4 & R2-ES HJF4D4. Resicoat R4 blue: R4-ES HJF1C4 & R4-ES HJF2C4. Resicoat R8 blue added in February 2025: R8-ES HJF5M4 The following grades are manufactured at THANE, INDIA: Resicoat R2 blue: R2 HJC43N, R2 HJF2HN, R2 HJF5BR. These materials are only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2202530

Expiry date:

28/02/2027

Approval Holder:

Akzo Nobel Powder Coatings GmbH

Company Name

Akzo Nobel Powder Coatings GmbH

Address

Markwiesenstrasse 50, D72770 Reutlingen

Country

Germany

Phone

+49 7121 519 191

General Email

info@resicoat.com

View All Listings by this Company