Range of wall mounted spout outlets incorporating brass bodies (various finishes) & plastic aerators. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2110318

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Methven on back plate or spout.

Installation Requirements:

R001 R040

Expiry date:

31/10/2026

Model:

WSP01XX WSP02XX WSP03XX WSP04XX WSP05XX WSP06XX WSP07XX WSP08XX Where xx denotes finish and is replaced with: CP = Chrome plated. BK = Matt black plated. BB - Brushed brass plated. BN - Brished nickel plated. GM = Gun metal plated.

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Chlorine dioxide dosing system consisting of PVC-U pipework and fittings. Maximum operating pressure 7.0 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2110076

Size:

Please refer to model.

Marking:

Scotmas, WRAS, model and operating parameters on adhesive label on body.

Installation Requirements:

R001 R120 R575

Expiry date:

31/10/2026

Model:

Bravo WA 2/50 Reactor: ½” BSP (F) inlet x 2” BSP (F) outlets. Bravo WA 4/210 Reactor: ½” BSP (F) inlet and outlets.

Approval Holder:

Scotmas Group

Company Name

Scotmas Group

Address

Scotmas Buildings, Solomon Way, Pinnaclehill Industrial Estate, Kelso, TD5 8AU

View All Listings by this Company

Manufacturer:

Scotmas Group

Company Name

Scotmas Group

Address

Scotmas Buildings, Solomon Way, Pinnaclehill Industrial Estate, Kelso, TD5 8AU

View All Listings by this Company

Range of filling loop assemblies consisting of an in-line isolation valve, in-line double check valve assembly which also incorporates an isolation valve (suitable for back flow protection against fluid category 3) and stainless steel braided EPDM lined hose. The isolation valves are operated via a single lever. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1015 Filling Loop

Size:

See model

Marking:

IDC logo (~E~ within a circle), WRAS and year of manufacture (YYYY) stamped on ferrule. IDC logo, CR, size and flow arrow on check valve assembly.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

1FLA002I: 14.7mm DCV x 14.7mm straight ISO, DN10 1FLA006I: 14.7mm DCV x 14.7mm straight ISO with pressure gauge, DN10 1FLA002: 15mm DCV x 15mm straight ISO, DN10 1FLA003: 15mm DCV x 15mm Tee ISO, DN10 1FLA004: 15mm DCV&ISO x 15mm straight ISO, DN10 1FLA005: 15mm DCV&ISO x 15mm Tee ISO, DN10 1FLA006: 15mm DCV x 15mm straight ISO with pressure gauge, DN10

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co., Ltd.

Company Name

IDC Fluid Control Co., Ltd.

Address

No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Zhejiang, Taizhou City, Zhejiang Province, P. R.China

Country

China

General Email

View All Listings by this Company

‘Profine’ plastic bodied filter head incorporating EPDM ‘O’-rings for use with filter cartridges (not supplied).For use with LLDPE tube (manufactured to DIN 8072). All models can be specified with or without an integral bracket. Maximum working pressure 6.0 bar. Cold water use only.

Section:

1050 Filters and Housings

WRAS Approval Number:

2107305

Note:

Intended for use with 33.65mm OD: Cartridge Profine Blue, Silver, Violet, Lilac and Ocra. Approved separately.

Size:

All models: ¼” pushfit inlet/outlet. ⅜” pushfit inlet/outlet. 8mm pushfit inlet/outlet. 10mm pushfit inlet/outlet.

Marking:

Profine by Think Water on body.

Installation Requirements:

R001 R008 R150

Expiry date:

31/07/2026

Model:

1100322 (parallel flow), 1100323 (in series flow), 1100324 (one side flow), 1100325 (in series reverse flow).

Approval Holder:

Think Water Srl

Company Name

Think Water Srl

Address

Via Delle Pezze 35 Cittadella (PD)

Postcode

35013

Country

Italy

Phone

(+39) 049 9403792

General Email

riccardo.favero@thinkwater.com

View All Listings by this Company

Manufacturer:

Think Water Srl

Company Name

Think Water Srl

Address

Via Delle Pezze 35 Cittadella (PD)

Postcode

35013

Country

Italy

Phone

(+39) 049 9403792

General Email

riccardo.favero@thinkwater.com

View All Listings by this Company

Range of inline water filter cartridges with polypropylene housing with a carbon block filter. Maximum working pressure 8.5 Bar Cold water use only.

Section:

1055 Filter Cartridges

Size:

15.6mm OD

Marking:

Clearwater, max temperature, max pressure, model and other technical info on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

30/09/2026

Model:

PURE F6C1 & PURE F12C1 FILTER CARTRIDGE

Approval Holder:

Clearwater Products Ltd

Company Name

Clearwater Products Ltd

Address

Unit 5603 Shannon Place Tewkesbury Place

Postcode

GL20 8SL

View All Listings by this Company

Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use (sizes 12mm-54mm only. 66.7mm, 76.1mm, 88.9mm & 108mm for above ground use only) Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107306

Size:

12mm - 108mm.

Marking:

JT, WRAS & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

Press fitting-elbow 90°CXC MP5090: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-elbow 90°FTGXC MP5092: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-elbow 45° CXC MP5041: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-elbow 45°FtgxC MP5040 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-crossover CXC MP5085: 15mm, 22mm, 28mm Press fitting-crossover FTGXC MP5086: 15mm, 22mm, 28mm Press fittng-Straight Coupling MP5270: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-equal tee MP5130: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-reducing Tee MP5130R: 15x15x22mm 22x15x15mm 22x15x22mm 22x22x15mm 22x22x28mm 28x15x15mm 28x15x22mm 28x22x15mm 28x22x22mm 28x22x28mm 28x28x15mm 28x28x22mm 28x28x35mm 35x22x22mm 35x22x35mm 35x28x22mm 35x28x28mm 35x28x35mm 35x35x15mm 35x35x22mm 35x35x28mm 40x28x28mm 42x35x35mm 42x28x42mm 42x35x42mm 42x42x15mm 42x42x22mm 42X42X28mm 42X42X35mm 54X54X15mm 54X54X28mm 54X54X35mm 54X42X42mm 54X54X42mm Press fitting-fitting reducer FTGXC MP5243: 22x15mm 28x15mm 28x22mm 35x15mm 35x22mm 35x28mm 42x15mm 42x22mm 42x28mm 42x35mm 54x15mm 54x22mm 54x28mm 54x35mm 54x42mm Press fitting- reducer CXC MP5240 22x15mm 28x15mm 28x22mm 35x15mm 35x22mm 35x28mm 42x15mm 42x22mm 42x28mm 42x35mm 54x15mm 54x22mm 54x28mm 54x35mm 54x42mm Press fitting-end stop MP5301: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Models added November 24: Press fitting - Extended slip coupling MP5270E: 12mm, 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 66.7mm, 76.1mm, 88.9mm, 108mm. Press fitting - Crossover FTGxC MP5086: 12mm, 18mm. Press fitting-Straight Coupling MP5270: 12mm, 18mm, 66.7mm 76.1mm 88.9mm 108mm. Press fitting-equal tee MP5130: 12mm, 18mm, 66.7mm 76.1mm 88.9mm 108mm. Press fitting- reducer CXC MP5240: 15x12mm 18x15mm 22x18mm 28x18mm 22x15mm 28x15mm 28x22mm 35x15mm 35x22mm 35x28mm 42x15mm 42x22mm 42x28mm 42x35mm 54x15mm 54x22mm 54x28mm 54x35mm 54x42mm MP5243 Press fitting-fitting reducer FTGXC: 15x12mm 18x12mm 18x15mm 22x18mm 28x18mm 66.7x28mm 66.7x35mm 66.7x42mm 66.7x54mm 76.1x35mm 76.1x42mm 76.1x54mm 76.1x66.7mm 88.9x42mm 88.9x54mm 88.9x76.1mm 108x42mm 108x54mm 108x66.7mm 108x76.1mm 108x88.9mm. MP5041 Press fitting-elbow 45° CXC: 12mm 18mm 66.7mm 76.1mm 88.9mm, 108mm. MP5090 Press fitting-elbow 90° CXC: 12mm 18mm 66.7mm 76.1mm 88.9mm 108mm. MP5040 Press fitting-elbow 45° Ftg x C: 12mm 18mm 66.7mm 76.1mm 88.9mm 108mm. MP5092 Press fitting-elbow 90° FTGXC: 12mm 15mm 18mm 22mm 28mm 35mm 42mm 54mm 66.7mm 76.1mm 88.9mm 108mm. MP015 Press fitting-copper bend with plain ends 15°: 28mm 35mm 42mm 54mm. MP030 Press fitting-copper bend with plain ends 30°: 28mm 35mm 42mm 54mm. MP045 Press fitting-copper bend with plain ends 45°: 28mm 35mm 42mm 54mm. MP060 Press fitting-copper bend with plain ends 60°: 28mm 35mm 42mm 54mm. MP090 Press fitting-copper bend with plain ends 90°: 15mm 18mm 22mm 28mm 35mm 42mm 54mm. CR030 Press fitting-copper reduced cross 30°: 18mmx15mm 22mmx15mm 28mmx15mm. BR00 Press fitting-copper bridge with plain ends: 12mm 15mm 22mm 28mm. MP5085 Press fitting-crossover CxC: 12mm 18mm. MP5092R Press fitting-Reducing elbow CxC: 22mmx15mm 28mmx15mm 28mmx22mm. MP5130 Press fitting-equal tee: 12mm 18mm 66.7mm 76.1mm 88.9mm 108mm. MP5130R Press fitting-reducing Tee: 15x12x12mm 15x15x12mm 18x18x12mm 18x15x15mm 18x18x15mm 18x15x18mm 22x22x12mm 22x22x18mm 28x28x18mm 35x35x15mm 35x35x18mm 42x42x18mm 54x54x22mm 66.7x66.7x22mm 66.7x66.7x28mm 66.7x66.7x35mm 66.7x66.7x42mm 66.7x66.7x54mm 76.1x76.1x22mm 76.1x76.1x28mm 76.1x76.1x35mm 76.1x76.1x42mm 76.1x76.1x54mm 76.1x76.1x66.7mm 88.9x88.9x22mm 88.9x88.9x28mm 88.9x88.9x35mm 88.9x88.9x42mm 88.9x88.9x54mm 88.9x88.9x76.1mm 108x108x22mm 108x108x54mm 108x108x66.7mm 108x108x76.1mm 108x108x88.9mm. MP5301 Press fitting-end stop: 12mm 18mm 66.7mm 76.1mm 88.9mm 108mm.

Approval Holder:

Ningbo Jintian Copper Tube Co Ltd

Company Name

Ningbo Jintian Copper Tube Co Ltd

Address

No.1 ChengXi West Road, CiCheng, NingBo

Country

China

Phone

0086 574 8757 4425

General Email

audrey@jtcorp.com.cn

View All Listings by this Company

Range of brass, chrome plated brass or DZR brass compression fittings for use with copper pipe only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

2110353

Size:

6mm -54mm

Marking:

IDC Plumbing & Heating Technology (Beijing) Ltd logo (E), CR and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

CXC Straight Coupling: 21199001 6mm 21100005 8mm 21100009 10mm 21100013 12mm 21100017 15mm 21100021 22mm 21100025 28mm 21100029 35mm 21100033 42mm 21100037 54mm C x C reduced coupling: 21109102 10mmx8mm 21109109 15mmx8mm 21109116 15mmx10mm 21109123 15mmx12mm 21109130 22mmx15mm 21109137 28mmx15mm 21109144 28mmx22mm 21109151 35mmx28mm CxC Burst Pipe Connector: 21101003 15mmx80mm 21101007 22mmx80mm 21140548 22mmx100mm CxF Adaptor: 21199011 6mmx1/4" (F) 21121113 8mmx1/4" (F) 21199012 8mmx3/8" (F) 21121127 10mmx1/4" (F) 21121134 10mmx3/8" (F) 21121141 10mmx1/2" (F) 21121155 15mmx1/4" (F) 21121162 15mmx3/8" (F) 21121169 15mmx1/2" (F) 21121176 15mmx3/4" (F) 21121183 22mmx1/2" (F) 21121190 22mmx3/4" (F) 21121197 22mmx1" (F) 21121104 28mmx1" (F) 21121118 35mmx11/4" (F) 21121125 42mmx11/2" (F) 21121132 54mmx2" (F) CxM Adaptor 21199007 6mmx1/4" (M) 21115011 8mmx1/4" (M) 21115018 8mmx3/8" (M) 21199006 8mmx1/2" (M) 21115032 10mmx1/4" (M) 21115039 10mmx3/8" (M) 21115046 10mmx1/2" (M) 21199008 12mmx1/4" (M) 21115074 15mmx1/4" (M) 21115081 15mmx3/8" (M) 21118304 15mmx1/2" (M) 21118318 15mmx3/4" (M) 21199009 22mmx1/2" (M) 21118332 22mmx3/4" (M) 21118346 22mmx1" (M) 21118353 28mmx3/4" (M) 21118360 28mmx1" (M) 21118374 35mmx11/4" (M) 21118381 42mmx11/2" (M) 21118388 54mmx2" (M) CxM Taper Adaptor: 21115011T 8mm x1/4" (M) 21115018T 8mm x3/8" (M) 21115032T 10mm x1/4" (M) 21115039T 10mm x3/8" (M) 21115046T 10mm x1/2" (M) 21115074T 15mm x1/4" (M) 21115081T 15mm x3/8" (M) 21115088T 15mm x1/2" (M) 21115095T 15mm x3/4" (M) 21115332T 22mm X 3/4" (M) 21115360T 28mm X 1" (M) 21115374T 35mm X 11/4" (M) 21115381T 42mm X 11/2" (M) 21115388T 54mm X 2" (M) Tank Connector: 21171019 15mm 21171026 22mm 21171033 28mm 21171040 35mm 21171047 42mm 21171054 54mm CxC 90 Elbow: 21124216 8mm 21124211 10mm 21124217 12mm 21124211 15mm 21124224 22mm 21124231 28mm 21124238 35mm 21124245 42mm 21124252 54mm CxC Reduced Elbow: 21199016 22mmx15mm CxM Elbow (M): 21145114 8mmx1/4" 21145121 10mmx1/4" 21145128 10mmx3/8" 21146236 10mmx1/2" 21199018 15mmx1/4" 21146243 15mmx1/2" 21146250 15mmx3/4" 21199019 22mmx1/2" 21146257 22mmx3/4" 21146264 22mmx1" 21146271 28mmx1" 21146278 35mmx11/4" 21146285 42mmx11/2" 21146292 54mmx2" 21145121T 10mm x 1/4" 21145128T 10mm x 3/8" 21145243T 15mmx1/2" 21145257T 22mmx3/4" 21145271T 28mmx1" 21145278T 35mmx11/4" 21145285T 42mmx11/2" 21145292T 54mmx2" CxF Elbow (F) 21148101 8mmx1/4" 21148105 10mmx1/4" 21148112 10mmx3/8" 21199020 10mmx1/2" 21148140 15mmx1/2" 21148147 15mmx3/4" 21148154 22mmx1/2" 21148161 22mmx3/4" 21148168 22mmx1" 21148175 28mmx1" 21148182 35mmx11/4" 21148189 42mmx11/2" 21148202 54mmx2" CxF wallplate Elbow: 21142327 15mmx1/2" 21199017 22mmx1/2" 21142341 22mmx3/4" CxCxC Equal Tee: 21199022 6mm 21151308 8mm 21151315 10mm 21199023 12mm 21151329 15mm 21151336 22mm 21151343 28mm 21151350 35mm 21151357 42mm 21151364 54mm CxCxC reduced Tee: 21153243 15mmx15mmx22mm 21153261 22mmx15mmx15mm 21153279 22mmx15mmx22mm 21153297 22mmx22mmx15mm 21153315 22mmx22mmx28mm 21153333 28mmx15mmx28mm 21153351 28mmx22mmx22mm 21153369 28mmx28mmx15mm 21153405 28mmx28mmx22mm 21153459 35mmx35mmx15mm 21153477 35mmx35mmx22mm 21153495 35mmx35mmx28mm CxCxF Reducer Tee: 21199029 15mmx1/2"x15mm 21199031 22mmx3/4"x22mm 21153531 15mmx15mmx1/2" 21153549 22mmx22mmx1/2" 21199027 22mmx22mmx3/4" 21153650 22mmx1/2"x22mm C Stop End: 21163377 8mm 21163384 10mm 21163391 12mm 21163398 15mm 21163405 22mm 21163412 28mm 21163419 35mm 21163426 42mm 21163433 54mm Swivel straight coupler (F): 21165223 15mmx1/2" copper x swivel 21165230 15mmx3/4" copper x swivel 21165237 22mmx3/4" copper x swivel Swivel elbow (F) 21165244 15mmx1/2"copper x swivel 21199032 22mmx3/4"copper x swivel Blank compression nut: 21150067 15" 21150068 22MM 21150069 28MM 21150070 35MM 21150071 42MM 21150072 54MM Internal 3 piece ccompression reducer: 21181693 10x 6mm 21181700 10x 8mm 21117641 15x 8mm 21124297 15x 10mm 21181721 15x12mm 21124296 22x 15mm 21181601 28x 15mm 21181605 28x 22mm 21181602 35x 22mm 21181763 35x28mm 21181784 42x28mm 21181819 54x35mm 21181805 54x22mm Reducing Set (1 part) internal compression reducer: 21081657 15mm x 8mm 21081658 15mm x 10mm 21081665 15mm x 12mm 21081672 22mm x 15mm 21081679 28mm x 15mm 21081686 28mm x 22mm Compression blanking disc: 21180511 6mm 21180513 8mm 21180517 10mm 21180521 15mm 21180525 22mm 21180529 28mm 21180533 35mm 21180537 42mm 21180541 54mm CXC Straight Coupling: 21240408 8mm 21240419 10mm 21240430 15mm 21240441 22mm 21240452 28mm 21240463 35mm 21240474 42mm 21240485 54mm C x C reduced coupling: 21240496 115X8mm 21240504 15X10mm 21240515 15X12mm 21240526 22X15mm 21240537 28X22mm CxC Pipe Connector: 21240003 15mmx80mm 21240007 22mmx80mm 21240548 22mmx100mm CxF Adaptor: 21240847 10mm X 3/8" 21240858 15mm X 3/8" 21240869 15mm X 1/2" 21240880 15mm X 3/4" 21240891 22mm X 1/2" 21240910 22mm X 3/4" 21240921 22mm X 1" 21240932 28mm X 3/4" 21240943 28mm X 1" 21240954 28mm X 11/4" 21240965 35mm X 11/4" 21240976 42mm X 11/2" 21240987 54mm X 2" Short CXF Adaptor: 21241015 15mm X 1/2" 21241026 15mm X 3/4" 21241037 22MMX 3/4" CxM Adaptor: 21240570 8mm X1/4" 21240573 8mm X3/8" 21240581 8mm X 1/2" 21240592 10mm X 1/4" 21240600 10mm X 3/8" 21240611 10mm X 1/2" 21240112 12mm X 1/4" 21240212 15mm X 1/4" 21240633 15mm X 3/8" 21240644 15mm X 1/2" 21240655 15mm X 3/4" 21240666 22mm X 1/2" 21240677 22mm X 3/4" 21240688 22mm X 1" 21240699 28MMX3/4" 21240707 28mm X 1" 21240718 28mm X11/4" 21240729 35mm X 1" 21240740 35mm X 11/4" 21240751 42mm X 11/2" 21240773 54mm X 2" 21215011T 8mm x1/4" 21215018T 8mm x3/8" 21215032T 10mm x1/4" 21215039T 10mm x3/8" 21215046T 10mm x1/2" 21215074T 15mm x1/4" 21215081T 15mm x3/8" 21215088T 15mm x1/2" 21215095T 15mm x3/4" 21215332T 22mm X 3/4" 21215360T 28mm X 1" 21215374T 35mm X 11/4" 21215381T 42mm X 11/2" 21215388T 54mm X 2" Tank Connector: 21241048 15mm 21241059 22mm 21241070 28mm 21241081 35mm 21241092 42mm 21241100 54mm CxC Reduced Elbow: 21225401 22mmx15mm CxM Elbow: 21241251 8mm X 1/4" 21241262 15mm X 1/2" 21241263 15mm X 3/4" 21241271 22mm X 1/2" 21241273 22mm X 3/4" 21241280 22mm X 1" 21241284 28mm X 1" 21241295 35mm X 11/4" 21241303 42mm X 11/2" 21241314 54mm X 2" CxF Elbow: 21241325 15mm X 1/2" 21241326 15mm X 3/4" 21241336 22mm X 3/4" 21241345 22mm X 1" 21241347 28mm X 1" 21241358 35mm X 11/4" 21241369 42mm X 11/2" 21241380 54mm X 2" CxF wallplate Elbow: 21241410 15mm X 1/2" 21241421 22mm X 3/4" CxCxC tee: 21241443 15mm 21241454 22mm 21241465 28mm 21241476 35mm 21241487 42mm 21241498 54mm CxCxC reduced Tee: 21241393 15mmX15mmX22mm 21241444 22mmX15mmX15mm 21241477 22mmX15mmX22mm 21241506 22mmX22mmX15mm 21241509 22mmX22mmX28mm 21241511 28mmX15mmX28mm 21241515 28mmX22mmX22mm 21241517 28mmX28mmX15mm 21241528 28mmX28mmX22mm 21241539 35mmX35mmX15mm 21241550 35mmX35mmX22mm 21241561 35mmX35mmX28mm 21241572 42mmX42mmX15mm 21241583 42mmX42mmX22mm 21241594 42mmX42mmX28mm 21241602 54mmX54mmX15mm 21241613 54mmX54mmX28mm CxCxF Tee: 21241624 15mm X 15mm X 1/2" 21241635 22mm X 22mm X 1/2" 21241646 22mm X 22mm X 3/4" 21241657 28mm X 28mm X 1/2" 21241658 28mm X 28mm X 3/4" 21241668 28mm X 28mm X 1" C Stop End: 21241111 15mm 21241122 22mm 21241133 28mm 21241144 35mm 21241155 42mm 21241166 54mm Swivel Straight : 21265223 15mmx1/2" 21265230 15mmx3/4" 21265237 22mmx3/4" Swivel elbow: 21265244 15mmx1/2" 21299032 22mmx3/4" Extended STRAIGHT COUPLING: 21240784 15mm X 1/2" 21240795 22mm X 3/4" 21240803 28mm X 1" 21240814 35mm X 11/4" 21240825 42mm X 11/2" 21240836 54mm X 2" Blank nut: 21240079 15mm 21240090 22mm 21240109 28mm 21240110 35mm 21240117 42mm 21240124 54mm 3 PIECE Reducer DZR: 21240205 15 X 8mm 21240216 15X10mm 21240227 15 X 12mm 21240238 22 X 15mm 21240249 28 X 15mm 21240260 28 X 22mm 21240271 35 X 15mm 21240282 35 X 22mm 21240293 35 X 28mm 21240301 42 X 15mm 21240312 42 X 22mm 21240323 42 X 28mm 21240334 42 X 35mm 21240345 54 X 15mm 21240356 54 X 22mm 21240367 54 X 28mm 21240378 54 X 35mm 21240389 54 X 42mm Reducing Set (1 part) DZR: 21253069 15mm x 8mm 21254294 10mm x 8mm 21250051 15mm x 10mm 21250100 22mm x 15mm 21250101 28mm x 15mm 21250102 28mm x 22mm CXC Straight Coupling: 21300000 6mm 21300001 8mm 21300005 10mm 21300009 12mm 21300013 15mm 21300017 22mm 21300021 28mm 21300025 35mm 21300029 42mm 21300033 54mm CxC reduced coupling: 21309001 15mmx8mm 21309005 15mmx10mm 21309009 15mmx12mm 21309013 22mmx15mm CxF Adaptor: 21321201 15mmx1/2" 21321205 15mmx3/4" 21321209 22mmx3/4" 21321213 22mmx1" 21321217 28mmx1" 21321221 35mmx1.1/4" CxM Adaptor: 21318106 15mmx3/8" 21318110 15mmx1/2" 21318114 15mmx3/4"E 21318118 22mmx3/4" 21318122 22mmx1" 21318129 28MMx3/4“ 21318130 28mmx1" 21318134 35mmx11/4" CxC Elbow: 21324303 8mm 90deg 21324306 10mm 90deg 21324309 12mm 90deg 21324312 15mm 21324315 22mm 21324318 28mm 21324319 35mm 90deg 21324320 42mm 90deg 21324321 54mm 90deg CxC Reduced Elbow: 21325401 22mmx15mm CxM Elbow: 21346401 15mmx1/2 21346405 22mmx3/4" 21346409 22mmx1" 21346413 28mmx1" CxF Elbow: 21349502 15mmx1/2 21349505 22mmx3/4" 21349508 22mmx1" 21349511 28mmx1" CxF wallplate Elbow: 21342601 15mmx1/2" 21342602 15mmx3/4" 21342605 22mmx3/4" 24042609 15mm x 1/2"x3/4" CxCxC tee: 21351701 12mmTeeEqual 21351705 15mmTeeEqual 21351709 22mmTeeEqual 21351713 28mmTeeEqual 21351717 35mmTeeEqual 21351721 42mmTeeEqual 21351725 54mmTeeEqual CxCxC reduced Tee: 21353802 15mmx15mmx22mm 21353805 22mmx15mmx15mm 21353808 22mmx15mmx22mm 21353811 22mmx22mmx15mm 21353814 22mmx22mmx28mm 21353817 28mmx15mmx28mm 21353820 28mmx28mmx15mm CxCxF Tee: 21353829 15mmx1/2"x15mm 21353823 15mmx15mmx1/2" 21353826 22mmx22mmx1/2" C Stop End: 21363901 15mm 21363905 22mm 21363909 28mm 21363913 35mm 21363917 42mm 21351725 54mm Swivel Straight: 21365002 15mmx1/2" 21365005 22mmx3/4" Swivel elbow: 21365008 15mmx1/2" 21399504 22mmx3/4" 3 PIECE Reducer: 21381105 22mm x 15mm 21381107 28mm x 15mm 21381109 28mm x 22mm CXC Straight Coupling: 24601015 15mm 24601022 22mm 24601028 28mm CxC reduced coupling: 24601222 22mm x 15mm CxF Adaptor: 24602152 15mm x 1/2" 24602223 22mm x 3/4" 24602224 22mm x 1" 24602284 28mm x 1" CxM Adaptor: 24603152 15mm x 1/2" 24603153 15mm x 3/4" 24603223 22mm x 3/4" 24603224 22mm x 1" 24603284 28mm x 1" Tank Connector: 24605015 15mm 24605022 22mm CxC Elbow: 24612015 15mm 24612022 22mm 24612028 28mm CxM Elbow: 24613152 15mm x 1/2" 24613223 22mm x 3/4" 24613224 22mm x 1" 24613284 28mm x 1" CxF Elbow: 24614152 15mm x 1/2" 24614223 22mm x 3/4" CxF wallplate Elbow: 24615152 15mm x 1/2" CxCxC tee: 24624015 15mm 24624022 22mm CxCxC reduced Tee: 24624221 22mm x 22mm x 15mm C Stop End: 24661015 15mm 24661022 22mm 24661028 28mm Brass olive: 200FBL06 6mm 200FBL08 8mm 200FBL10 10mm 200FBL12 12mm 200FBL15 15mm 200FBL22 22mm 200FBL28 28mm 200FBL35 35mm 200FBL42 42mm 200FBL54 54mm Copper olive: 200FCE06 6mm 200FCE08 8mm 200FCE10 10mm 200FCE12 12mm 200FCE15 15mm 200FCE22 22mm 200FCE28 28mm 200FCE35 35mm 200FCE42 42mm 200FCE54 54mm

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106009

Size:

12mm - 108mm.

Marking:

Taizhou Double Winner logo (dbw in a box) and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

6270 & 6270CP Copper Press Coupling: 12 - 108mm. 6271 & 6271CP Copper Press Coupling: 12 - 54mm. 6240 & 6240CP Reducer press x press: 15mmx12mm - 54mmx42mm. 6243 & 6243CP Reducer x press: 15mmx12mm - 108mm x 88.9mm. 6001& 6001CP Bend 90° x press: 12-108mm. 6002 & 6002CP Bend 90° press x press: 12 - 108mm. 6130 & 6130CP Equal Tee 3 x press: 12 - 108mm. 6040 & 6040CP Bend 45° x press: 12 - 108mm. 6041& 6041CP Bend 45° press x press: 12 - 108mm. 6301 & 6301CP Endcap press: 12 - 108mm. 6131 & 6131CP Reducing Tee 3 x press: 15mmx15mmx12mm - 108mm x 76.1mm x 108mm. 6085 & 6085CP Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 & 6086CP Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 & 6510CP Flange PN16: 76.1mm. Chrome plated models added 02/06/2023

Approval Holder:

Taizhou Double Winners Copper Co., Ltd

Company Name

Taizhou Double Winners Copper Co., Ltd

Address

Room 902, No.185-1 Wenxue Road, Jiazhi Street, Jiaojiang, Taizhou, Zhejiang

Postcode

31800

Country

China

General Email

info@double‐winners.com

View All Listings by this Company

Range of M type press fittings with TP2 copper bodies and EPDM ‘O’-rings, for use with TP2 copper pipe to EN1057. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2110321

Size:

See model.

Marking:

Hailiang and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

EKYH0000, STRAIGHT COUPLING WITH GROOVE CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0002, SLIP COUPLING CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0003, REDUCING COUPLING CXC: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0004, FITTING REDUCER FXC: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0005, COPPER FEMALE ADAPTOR: S15*1/2FC‐G S22*3/4FC‐G S28*1FC‐G S35*1 1/4FC‐G S42*1 1/2FC‐G S54*2FC‐G Note: FC‐G is female BSPP EKYH0006, COPPER MALE ADAPTOR: S15*1/2MC‐ZG S15*3/4MC‐ZG S22*3/4MC‐ZG S22*1MC‐ZG S28*1MC‐ZG S35*1 1/4MC‐ZG S42*1 1/2MC‐ZG S54*2MC‐ZG Note: MC‐ZG is male BSPT EKYH0012, EXTENDED SLIP COUPLING CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0100, 90DEG ELBOW CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0101, 90DEG STREET ELBOW FTGXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0104, REDUCER ELBOW: 22mm*15mm 28mm*15mm 28mm*22mm EKYH0130, 45DEG ELBOW CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0131, 45DEG STREET ELBOW FTGXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0166, CROSSOVER CXC:15mm, 22mm, 28mm EKYH0167, PART CROSSOVER FTGXC: 15mm, 22mm, 28mm EKYH0201, EQUAL TEE CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0202, REDUCING TEE: 22mm*22mm*15mm 28mm*28mm*15mm 28mm*22mm*15mm 35mm*35mm*15mm 35mm*35mm*22mm 35mm*35mm*28mm 42mm*42mm*15mm 42mm*42mm*22mm 42mm*42mm*28mm 42mm*42mm*35mm 54mm*54mm*15mm 54mm*54mm*22mm 54mm*54mm*28mm 54mm*54mm*35mm 54mm*54mm*42mm 22mm*15mm*15mm 22mm*15mm*22mm 28mm*15mm*15mm 28mm*15mm*22mm 28mm*15mm*28mm 28mm*22mm*15mm 28mm*22mm*22mm 28mm*22mm*28mm 15mm*15mm*22mm 22mm*22mm*28mm EKYH0301, CAP CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Models added September 2023: EKYH0001 STRAIGHT COUPLING WITH DOT CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. EKYH0202 REDUCING TEE: 35mm*22mm*22mm, 35mm*22mm*35mm, 35mm*28mm*35mm, 35mm*28mm*22mm, 35mm*28mm*35mm, 42mm*35mm*35mm. EKYH0005 COPPER FEMALE ADAPTOR: 15mm*3/4", 22mm*1/2", 22mm*1", 28mm*3/4", 35mm*1". EKYH0006 COPPER MALE ADAPTOR: 22mm*1/2", 28mm*3/4", 35mm*1". Models added in July 2024: EKYH0001 STRAIGHT COUPLING WITH DOT CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0002 SLIP COUPLING CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0012 EXTENDED SLIP COUPLING CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0003 REDUCING COUPLING CXC 66.7mmX22mm 66.7mmX28mm 66.7mmX35mm 66.7mmX42mm 66.7mmX54mm 76.1mmX28mm 76.1mmX35mm 76.1mmX42mm 76.1mmX54mm 76.1mmX66.7mm 88.9mmX42mm 88.9mmX54mm 88.9mmX66.7mm 88.9mmX76.1mm 108mmX28mm 108mmX35mm 108mmX42mm 108mmX54mm 108mmX66.7mm 108mmX76.1mm 108mmX88.9mm EKYH0004 FITTING REDUCER FXC 66.7mmX28mm 66.7mmX35mm 66.7mmX42mm 66.7mmX54mm 76.1mmX28mm 76.1mmX35mm 76.1mmX42mm 76.1mmX54mm 76.1mmX66.7mm 88.9mmX42mm 88.9mmX54mm 88.9mmX66.7mm 88.9mmX76.1mm 108mmX28mm 108mmX35mm 108mmX42mm 108mmX54mm 108mmX66.7mm 108mmX76.1mm 108mmX88.9mm EKYH0100 90DEG ELBOW CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0101 90DEG STREET ELBOW FTGXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0130 45DEG ELBOW CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0131 45DEG STREET ELBOW FTGXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0301 CAP CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0201 EQUAL TEE CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0202 REDUCING TEE 66.7mmX66.7mmX22mm 66.7mmX66.7mmX28mm 66.7mmX66.7mmX35mm 66.7mmX66.7mmX42mm 66.7mmX66.7mmX54mm 76.1mmX76.1mmX22mm 76.1mmX76.1mmX28mm 76.1mmX76.1mmX35mm 76.1mmX76.1mmX42mm 76.1mmX76.1mmX54mm 76.1mmX76.1mmX66.7mm 88.9mmX88.9mmX22mm 88.9mmX88.9mmX28mm 88.9mmX88.9mmX35mm 88.9mmX88.9mmX42mm 88.9mmX88.9mmX54mm 88.9mmX88.9mmX66.7mm 88.9mmX88.9mmX76.1mm 108mmX108mmX22mm 108mmX108mmX28mm 108mmX108mmX35mm 108mmX108mmX42mm 108mmX108mmX54mm 108mmX108mmX66.7mm 108mmX108mmX76.1mm 108mmX108mmX88.9mm EKYH0005 COPPER FEMALE ADAPTOR 66.7mmX2 1/2" BSPP 76.1mmX2 1/2" BSPP 76.1mmX3" BSPP 88.9mmX3" BSPP 108mmX4" BSPP EKYH0006 COPPER MALE ADAPTOR 66.7mmX2 1/2" BSPT 76.1mmX2 1/2" BSPT 76.1mmX3" BSPT 88.9mmX3" BSPT 108mmX4" BSPT EKYH0501 FLANGE 28mm, 35mm, 42mm, 54mm, 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0705 STRAIGHT CYLINDER UNION 15mm*G 1/2 15mm*G 3/4 22mm*G 3/4 22mm*G 1 28mm*G 1 EKYH0704 BENT CYLINDER UNION 15mm*G 1/2 15mm*G 3/4 22mm*G 3/4 22mm*G 1 28mm*G 1 EKYH0703 STRAIGHT TAP CONNECTOR 15mm*G 1/2 15mm*G 3/4 22mm*G ¾ EKYH0702 BENT TAP CONNECTOR 15mm*G 1/2 15mm*G 3/4 22mm*G ¾ EKYH0000 STRAIGHT COUPLING WITH GROOVE CXC 66.7mm, 76.1mm, 88.9mm, 108mm

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Copper brazed micro plate heat exchanger with copper and stainless-steel (316/1.4401) plates. Maximum working pressure 25.0 Bar. Maximum operating temperature 100°C

Section:

1350 Heat Exchangers

Size:

¾” BSP (M)

Marking:

Danfoss company logo, model name, maximum temperature and pressure, date of manufacture (YYYY-MM-DD) and other technical infomation on adhesive label on front of heat exchanger.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

XB06

Approval Holder:

Danfoss A/S

Company Name

Danfoss A/S

Address

Nordborgvej 81 6430 Nordborg

Country

Denmark

Phone

+74 88 22 22

General Email

danfoss@danfoss.com

View All Listings by this Company

Manufacturer:

Danfoss Trata d.o.o.

Company Name

Danfoss Trata d.o.o.

Address

Joezeta Jame 16, SI-1210 Ljubljana Sentvid Slovenia

General Email

View All Listings by this Company