Directory Search Results

Print List

#2109071

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2109071
Size:
15mm Compression Model added April 2022: ½” BSP (M)
Marking:
Smart Line nk Porcelanosa Fluidmaster, model and flushing volumes inside of cistern.
Installation Requirements:
R001 R556
Expiry date:
30/09/2026
Model:
100294198 100294217

Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
CV-20 Km2 VILA-REAL CASTELLON
Postcode
12540
Country
Spain
General Email
certificaciones@noken.com

View All Listings by this Company

Print This Approval


#2212365

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212365
Size:
½” BSP (M).
Marking:
Crosswater X logo on flush plate. Model & 6L waterline printed within cistern.
Installation Requirements:
R001 R556
Expiry date:
31/12/2027
Model:
WCF114X51R & WCF114X50R WC

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#240502707

Range of spring loaded resilient trim check valve cartridges with a plastic body and EPDM ‘O’-rings. For insertion into specifically dimensioned bores Maximum working pressure 10 Bar Maximum operating temperature 85°C

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
240502707
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model
Marking:
Korie, size and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
Korie DN12, DN12200000 Korie DN14, DN14200000 Korie DN20, DN20200000

Approval Holder:
Yuhuan Korie Plastic Factory
Company Name
Yuhuan Korie Plastic Factory
Address
Technology Industry Functional Area, Chumen Village Yuhuan
Country
Zhejiang

View All Listings by this Company
Manufacturer:
Yuhuan Korie Plastic Factory
Company Name
Yuhuan Korie Plastic Factory
Address
Technology Industry Functional Area, Chumen Village Yuhuan
Country
Zhejiang

View All Listings by this Company

Print This Approval


#240588006

Single hole, single outlet (fixed), over the rim (swivel nozzle) bidet combination tap assembly (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a lever operated pop-up waste (not verified by test). Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
240588006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Villeroy & Boch on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2029
Model:
TVB105201110xx with pop up waste Where xx denotes the surface finish and can be replaced with: 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite.

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#240588007

Range of single hole, single outlet (fixed), over the rim (swivel nozzle) bidet combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. The product is supplied with a lever operated pop-up waste (not verified by test). Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
240588007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Villeroy & Boch on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2029
Model:
TVB104201110xx, TVB125001000xx, TVB103001000xx. Where xx denotes the surface finish and can be replaced with: 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite.

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#240504004

Range of quarter turn ceramic disc headworks with brass bodies and EPDM O rings. For insertion into specifically dimensioned bores. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
240504004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see model
Marking:
Galatron etched on body
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
0212AXX-xxxx.xx Headworks GN90 ½”Dx or Sx: 18.48mmOD 0220AXX-xxxx.xx Headworks GR90 M20x1 EVO Dx or Sx: 18.76mmOD 0234AXX-xxxx.xx Headworks GN90 ¾” Dx or Sx:23.79mmOD

Approval Holder:
Galatron Plast Spa
Company Name
Galatron Plast Spa
Address
Via Dell' Artigianato 22, Castiglione Delle Stiviere, 46043 Mantova
Country
Italy
Phone
+39 0376 630778 Fax: +39 0376 632333
General Email
sales@galatron.it

View All Listings by this Company
Manufacturer:
Galatron Plast Spa
Company Name
Galatron Plast Spa
Address
Via Dell' Artigianato 22, Castiglione Delle Stiviere, 46043 Mantova
Country
Italy
Phone
+39 0376 630778 Fax: +39 0376 632333
General Email
sales@galatron.it

View All Listings by this Company

Print This Approval


#240502033

Range of ceramic disc headworks with brass bodies incorporating NBR O-rings. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 10 Bar Maximum operating temperature 85°C

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
240502033
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model
Marking:
PPI on body
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
VS01-XXXX – ½” BSP (M) VS02-XXXX – ½” BSP (M) VS03-XXXX – ¾” BSP (M) VS04-XXXX – ¾” BSP (M) VS05-XXXX – ½” BSP (M) VS06-XXXX – M18 (M) Where XXXX denotes the following: 1st X = Opening direction, ‘H’ for left open, ‘C’ for right open 2nd X = Spline count, ‘1’ for 20 splines, ‘2’ for 24 splines. 3rd & 4th X = Screw rod length, ‘10’ to ‘55’ for length in mm

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#240502005

Range of thermostatic cartridges with either plastic or brass bodies (see model) and stainless-steel filters (except model ZL-FX-LFXTS45). For insertion into specifically dimensioned bores. Maximum working pressure 6.0 bar. Maximum operating temperature 75°C.

Section:
0442 Thermostatic cartridges
Section Subtitle:
Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:
240502005
Size:
See model
Marking:
Zonly and WRAS on body.
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
Plastic body: ZL-FX-LS27 - Ø26.7mm, ZL-FX-CS27 - Ø26.7mm, ZL-FX-LFXTS45 - Ø50.0mm. Brass body: ZL-FX-LCT35 - Ø34.0mm, ZL-FX-LFT36 - Ø34.5mm, ZL-FX-LFXT48 - Ø47.4mm.

Approval Holder:
Taizhou Zhonglin Intelligent Bathroom Technology Co., Ltd
Company Name
Taizhou Zhonglin Intelligent Bathroom Technology Co., Ltd
Address
Fanhai Village, Qinggang Town Yuhuan, Taizhou City Zhejiang Province, China

View All Listings by this Company
Manufacturer:
Taizhou Zhonglin Intelligent Bathroom Technology Co., Ltd
Company Name
Taizhou Zhonglin Intelligent Bathroom Technology Co., Ltd
Address
Fanhai Village, Qinggang Town Yuhuan, Taizhou City Zhejiang Province, China

View All Listings by this Company

Print This Approval


#240502053

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The products incorporate a pull-out spout with a plastic aerator. Both models incorporate an approved check valve cartridge within the quick connector to the pull-out hose, and the inlet to the pull-out spout of the 63036-01X model incorporates an approved check valve cartridge with a plastic flow regulator, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
240502053
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R007 applies to the connecting hose between the tap body and the pull-out hose.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Lota on front of body
Installation Requirements:
R001 R007 R009 R090
Expiry date:
31/05/2029
Model:
63036-01X, 63694-00X. Where X denotes the finish and can be replaced by any of the following: 0107 = Chrome, 04 = Brushed Nickel, 4408 = Brushed Brass, 7001 = Matt Black, 4403 = Brushed Brass (Light), 0402 = Brushed Nickel, 5804 = Gun Metal, 0408 = Brushed Stainless Steel.

Approval Holder:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company

Print This Approval


#2309378

Single-hole, single outlet, (swivel), combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull-out spray type that incorporates a plastic aerator. The inlet of the cold supply hose and the pull-out spray handset both incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2309378
Size:
Cold inlet: Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (M) end connection. Hot inlet: Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connection.
Marking:
Leisure on operating member.
Installation Requirements:
R001 R090
Expiry date:
30/09/2028
Model:
Aquaflex

Approval Holder:
AGA Rangemaster Ltd
Company Name
AGA Rangemaster Ltd
Address
Meadow Lane, Long Eaton, Nottingham
Postcode
NG10 2GD
Phone
+44 (0) 115 946 4000
General Email
info@agarangemaster.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 646 of 1180

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.