Combination tap assembly (chrome plated brass), with a dome type operating member controlling the flow and temperature with a non-concussive thermostatic cartridge headwork. The spout outlet incorporates a plastic aerator. The inlets incorporate approved single check valve cartridges, however, the complete assembly has not been tested to demonstrate backflow protection. Maximum working pressure 5.0 Bar Maximum operating temperature 85°C.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

2104926

Size:

Stainless-steel braided PEX lined flexible hose assemblies with ½” BSP (F) captive nut end connections

Marking:

Triton on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2026

Model:

TTINBMN2

Approval Holder:

Triton Showers

Company Name

Triton Showers

Address

Triton Road, Nuneaton, Warwickshire

Postcode

CV11 4NR

Country

United Kingdom

Phone

02476 324423

General Email

paulrowley@tritonshowers.co.uk

View All Listings by this Company

Self-closing basin tap (chromium plated brass), incorporating a self-closing headwork with dome type operating memeber. Temperature is controlled independently by a manual lever. Spout outlet incorporates a plastic aerator. The inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete assembly has not been tested to demonstrate backflow protection.. Maximum working pressure 10.0 bar.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

2311357

Size:

Stainless steel braided PEX lined hose with 3/8" BSP captive nut end connectors.

Marking:

Grohe Logo etched on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2028

Model:

36.317 - EUROSMART CT.

Product Images

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

White PVC shower hose, with EPDM washers. BS6920 65°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2310388

Note:

Open outlet use only

Size:

½” captive or conical nut.

Marking:

T-SAFE on conical nut.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

03-09xxyy White hose classic with coloured cone 03-091110 White Disposable Hose 1.25m Metal Connections Where: A denotes the type of end connection, and can be replaced with: 1 = Conical nut smooth, 2 = Conical nut with external ‘O’-ring, 3 = Conical nut knurled, 4 = Conical nut 2-ring criss-cross pattern, 5 = Ball nut, 6 = Hex nut, 7 = Knurled nut. ** denotes length in cm, and can be: 50 - 200.

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Black PVC lined flexible shower hose with chrome plated metal outer sheath and EPDM washer. Maximum operating temperature 65°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2311317

Note:

Open oulet use only,

Size:

½” BSP (F) captive nut x ½” BSP(F) conical nut

Marking:

‘Modun’ & WRAS on hose connector

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

MD026

Product Images

Approval Holder:

Kaiping Modun Sanitary Ware Co. Ltd.

Company Name

Kaiping Modun Sanitary Ware Co. Ltd.

Address

NO. 67, JIAXING NORTH ROAD, SHUIKOU TOWN, KAIPING, GUANGDONG

Country

China

View All Listings by this Company

Manufacturer:

Kaiping Modun Sanitary Ware Co. Ltd.

Company Name

Kaiping Modun Sanitary Ware Co. Ltd.

Address

NO. 67, JIAXING NORTH ROAD, SHUIKOU TOWN, KAIPING, GUANGDONG

Country

China

View All Listings by this Company

Range of PEX or PVC lined interlocked shower hoses (chrome plated) incorporating a stainless steel EPDM strainer washers or EPDM washers. Maximum operating temperature 85.0°C (PEX models) or 65.0°C (PVC models).

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2311046

Note:

Open outlet use only.

Size:

½” BSP (F) captive nut x ½” BSP (F) conical nut

Marking:

Water Boger logo, WRAS and date of manufacturer (YYYY) on ferrule

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

WBR01-PEX (12.5mm outer diameter hose) WBR02-PEX (14.0mm outer diameter hose) WBR01-PVC (12.5mm outer diameter hose) WBR02-PVC (14.0mm outer diameter hose)

Product Images

Approval Holder:

Water Boger Hardware (Shenzhen) Co. Ltd

Company Name

Water Boger Hardware (Shenzhen) Co. Ltd

Address

No.501 and No. 401, No. 8, Nuclear Power Industrial Park Fumin Community, Fucheng Street, Longhua District, Shenzhen City, Guangdong Province, P.R. China

View All Listings by this Company

Manufacturer:

Water Boger Hardware (Shenzhen) Co. Ltd

Company Name

Water Boger Hardware (Shenzhen) Co. Ltd

Address

No.501 and No. 401, No. 8, Nuclear Power Industrial Park Fumin Community, Fucheng Street, Longhua District, Shenzhen City, Guangdong Province, P.R. China

View All Listings by this Company

Range of plastic shower hoses with a PEX inner liner and external PVC outer in various finishes (see model). Maximum operating temperature 65°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2311322

Note:

Open outlet use only

Size:

½” Conical nut x ½” captive nut

Marking:

UWILL, WRAS, Year of manufacture on ferrule

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

UW-SC2004XX Where XX denotes outer layer finish and can be replaced with: 01 - Silver grey, 02 - Silver shining, 03 - Rose, 04 - Matt white, 05 - Matt black, 06 - Nickel brush. Available in lengths of 30-300cm

Product Images

Approval Holder:

Xiamen Uwill Sanitary Ware Co. Ltd.

Company Name

Xiamen Uwill Sanitary Ware Co. Ltd.

Address

3rd Floor, No. 82th Building, Guankouzhonglu, Jimei District

Country

Xiamen,

View All Listings by this Company

Range of stainless steel interlocked shower hoses with PVC inner liner and EPDM gaskets and stainless steel strainers.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2311908

Note:

Open outlet use only.

Size:

See model

Marking:

Diecheng on conical nut.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

DCR – 12 -1800mm length ½” x ½” BSP (F) DCR – 23 -1500mm length ½” x ½” BSP (F) DCR – 24 -1600mm length ½” x ½” BSP (F)

Approval Holder:

Xiamen Diecheng Sanitary Ware Co., Ltd

Company Name

Xiamen Diecheng Sanitary Ware Co., Ltd

Address

Unit 402, Building 22, Jinhui Road, Jimei District, Xiamen City, Fujian Province

Country

China

Phone

0086-595-86186830

General Email

Sales@dcshowers.com

View All Listings by this Company

Manufacturer:

Xiamen Diecheng Sanitary Ware Co., Ltd

Company Name

Xiamen Diecheng Sanitary Ware Co., Ltd

Address

Unit 402, Building 22, Jinhui Road, Jimei District, Xiamen City, Fujian Province

Country

China

Phone

0086-595-86186830

General Email

Sales@dcshowers.com

View All Listings by this Company

Stainless steel braided, PEX lined flexible hose assemblies with EPDM washers and O ring incorporating an isolation valve (brass body and ball), tee piece (brass) and incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2310014

Size:

Stainless steel braided, PEX lined flexible hose assembly incorporating 3/8" BSP split nut x 3/8" spigot end connection.

Marking:

IDC (E) logo, size, temperature and pressure on hose sleeve.

Installation Requirements:

R001 R008

Expiry date:

31/10/2028

Model:

322-1175.

Approval Holder:

IDC Fluid Control Co., Ltd.

Company Name

IDC Fluid Control Co., Ltd.

Address

No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Zhejiang, Taizhou City, Zhejiang Province, P. R.China

Country

China

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co., Ltd.

Company Name

IDC Fluid Control Co., Ltd.

Address

No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Zhejiang, Taizhou City, Zhejiang Province, P. R.China

Country

China

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103346

Size:

DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)

Marking:

MB (Brand of Navigator used under license by Wolseley), WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

236550, 236548, 236543, 236547, 236551, 236545, 236549, 236542, 236541, 236544 & 236546

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Wall mounted, manual blending valve (chromium plated brass), incorporating ceramic cartridge headwork with a single lever operating member. The outlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

2311006

Size:

½” BSP (M)

Marking:

Axor on body

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2028

Model:

11 620 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company