Directory Search Results

Fittings Materials
Print List

#250102024

Concealed, ceiling mounted installation sets and shower outlets. The inlets incorporate a plastic flow regulator. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250102024
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The ceiling mounted installation sets are not approved in their own right. Open outlet use only.
Size:
½” BSP (F)
Marking:
Dornbracht on shower face.
Installation Requirements:
R001 R040
Expiry date:
31/01/2030
Model:
Concealed ceiling mounted installation sets: 3577097090, 3577197090, 3578097090, 3578197090. Which must be installed in conjunction with the following shower outlets: 2 inlets/2 spray modes: 41770979, 41771979, 41772979, 41773979. 5 inlets/5 spray modes: 41780979, 41781979.
Product Images
Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval

#250102027

Range of shower handsets (plastic bodies – various finishes), incorporating a plastic flow regulator on the inlet. Open outlet use only. Maximum operating temperature: 60 °C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250102027
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Hansgrohe on Body
Installation Requirements:
R001 R040
Expiry date:
31/01/2030
Model:
26 014 xx0. Models added April 2025: 26 515 xx0 & 26 516 xx0. Models added August 2025: 38 276 4xx & 39 276 4xx. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval

#250104022

Range of overhead shower outlets with brass bodies (various finishes). The inlet incorporates a plastic flow regulator and stainless steel strainer. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250104022
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
THG on inlet connector.
Installation Requirements:
R001 R040
Expiry date:
31/01/2030
Model:
281T/W - Shower head Ø220mm with easy clean system Style : G00- all styles Finishes: A02-Polished Chrome ; B01-Polished Nickel ; C01-Matte Nickel ; C02-Matte Chrome ; D01-Light Bronze Lacquered ; F01-Polished Gold ; F07-Matte Gold ; F30-Soft Gold ; F31-Matte Soft Gold ; F33-Brown Bronze PVD ; F34-Matte Brown Bronze PVD; G02-Polished Chrome/Polished Gold ; H28-Antique Nickel ; H49-Brass PVD ; H50-Matte Brass PVD ; H52-Gold PVD ; H53-Matte Gold PVD ; H55-Nickel PVD ; H56-Matte Nickel PVD ; H60-Matte Blush PVD ; H62-Blush PVD ; H64-Graphite PVD ; H65-Matte Graphite PVD ; H66-Umber PVD ; H67-Matte Umber PVD; D30 Matte black ceramic For explanation: A complete code number compile three information’s, for example: G00-A02-281T/W-…. (SERIE-FINISH-ARTICLE). This would give you a Single lever basin mixer, with waste, high model in Yoko style and polished chrome finish..
Product Images
Manufacturer:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80

View All Listings by this Company

Print This Approval

#250102029

Range of shower handsets incorporating chromium plated ABS plastic bodies. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250102029
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
½” BSP M
Marking:
Dornbracht logo on body
Installation Requirements:
R001 R040
Expiry date:
31/01/2030
Model:
28029979 28027979 28025979 28025626
Product Images
Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval

#250102030

Range of shower handsets with plastic bodies incorporating an integral filter. The inlet incorporates a combined washer and a strainer, plastic flow regulator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C. Open outlet use only.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250102030
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP male.
Marking:
T Safe A/S logo on face of hand shower.
Installation Requirements:
R001 R040
Expiry date:
31/01/2030
Model:
02-803102, 02-803103, 02-803112, 02-803121, 02-803125, 02-803310, 02-803320, 02-803330, 02-803311, 02-803321, 02-803331, 02-803332, 02-803333.
Product Images
Approval Holder:
T-safe A/S
Company Name
T-safe A/S
Address
Gydevang 1, Alleroed
Postcode
3450
Country
Denmark
Phone
+45 61610518
General Email
moj@t-safe.com

View All Listings by this Company
Manufacturer:
T-safe A/S
Company Name
T-safe A/S
Address
Gydevang 1, Alleroed
Postcode
3450
Country
Denmark
Phone
+45 61610518
General Email
moj@t-safe.com

View All Listings by this Company

Print This Approval

#241202060

Range of In-line ‘Y’ patterned strainer with ductile iron bodies (blue epoxy powder coated) and stainless-steel screens. Maximum working pressure 16.0 bar. Maximum operating temperature 85ºC.

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN40-DN300 Flanged.
Marking:
Comeval, size, PN & flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
UNIWAT® 630W
Approval Holder:
Comeval Valve Systems S.L y CIA., Soc. Comanditaria
Company Name
Comeval Valve Systems S.L y CIA., Soc. Comanditaria
Address
Les Rotes 15 El Puig de Santa Maria
Postcode
ES 46540
Country
Spain
General Email
carlos.ruiz@comeval.es

View All Listings by this Company

Print This Approval

#250102011

Range of In-line Y patterned strainers with ductle iron bodies (blue epoxy powder coated) and stainless-steel mesh. Maximum working pressure: 16 Bar Maximum operating temperature: 85 °C

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400 and DN500 flanged connections
Marking:
ATUSA, DN, PN and Flow arrow on body
Installation Requirements:
R001 R120
Expiry date:
31/01/2030
Model:
510
Approval Holder:
ATUSA GRUPO EMPRESARIAL, S.A.
Company Name
ATUSA GRUPO EMPRESARIAL, S.A.
Address
Pol. Industrial ATUSA-Agurain, S/N 01200 Salvatierra (Álava- España)
Phone
+34 945 18 00 00
General Email
info@atusa.es

View All Listings by this Company

Print This Approval

#250104012

Range of wall mounted bib taps (chromium plated brass), incorporating a non-rising spindle headwork with a cross top operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum working temperature 85°C.

Section:
1750 Taps
Section Subtitle:
Draw off bib tap(s)
WRAS Approval Number:
250104012
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
PPI on tap body
Installation Requirements:
R001 R040
Expiry date:
31/01/2030
Model:
Model M1140 X XXX X XXX Denotes the following: First X: Different handle and the second, third & fourth XXX for different finishes: Handles: A (Lever type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.
Product Images
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China

View All Listings by this Company

Print This Approval

#250102047

Wall mounted, single hole, single outlet (fixed) bib tap (chromium plated brass), incorporating a non-rising spindle with a single lever operating member. The outlet incorporates a metal flow straightener. Maximum working pressure 10 Bar. Maximum operating temperature 85°C.

Section:
1750 Taps
Section Subtitle:
Draw off bib tap(s)
WRAS Approval Number:
250102047
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP M
Marking:
Armitage shanks on indice.
Installation Requirements:
R001 R040
Expiry date:
31/01/2030
Model:
S8270AA
Product Images
Approval Holder:
Armitage Shanks Ltd
Company Name
Armitage Shanks Ltd
Address
Old Road Armitage Rugeley Staffordshire WS15 4BT

View All Listings by this Company

Print This Approval

#250104013

Self closing basin tap (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar, Maximum operating temperature 85°C.

Section:
1820 Taps
Section Subtitle:
Self closing tap(s).
WRAS Approval Number:
250104013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
PPI on body.
Installation Requirements:
R001 R006
Expiry date:
31/01/2030
Model:
M1201 X XXX M1202 X XXX X XXX Denotes the following: First X: Different handle and the second, third & fourth XXX for different finishes: Handles: A (Dome type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1
Product Images
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 634 of 791

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.