Directory Search Results

Print List

#251215902

Section:
0683 Combination Tap Assemblies
Description:
A Range of Multiple Function tap(s). In addition to normal tap function includes at least one of following functions chilled, filtered, carbonated, instantaneous hot water.
Deck Mounted Additional Boiling, Chilled and Sparkling Water features Cold water function can also be activated via an Infra-red sensor. Stainless steel braided PEX lined inlet hoses Stainless steel braided PEX lined connection hoses Capable of achieving AUK3 Tap Gap
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R006 R007 R009 R160
Expiry date:
31/12/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
24015**Various1/2" BSP (F)8 bar85 °CNLBOn bodyNoCeramic cartridgeC-plateAeratorInterconnecting Hoses,
25001**Various1/2" BSP (F)8 bar85 °CNLBOn bodyNoCeramic cartridgeC-plateAeratorInterconnecting Hoses,

Notes & Further Information

** represent different finishes No suffix: Chrome plated H: Black, N: Nickel brushed, GJS: Zirconium gold brushed, G: Zirconium gold, QTSL: Brushed bronze bright, QTS: Brushed bronze matte, TJ: Titanium gold, TJLS: Titanium gold brushed, MGJ: Rose gold, MGJL: Rose gold brushed, HGT: Red bronze, HTL: Yellow bronze brushed, HTS: Red bronze brushed, PVDQH: Gun grey, HQ: Gun grey brushed, Q: Bronze, DYB: Matte white, STS: Acid copper brushed, BZ: Spray pearl white, DMGJ: Light rose gold brushed.


Approval Holder:
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Company Name
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Address
JIAOXI INDUSTRIAL ZONE QINGGANG, YUHUAN TAIZHOU ZHEJIANG
Country
China

View All Listings by this Company
Manufacturers:
TAIZHOU NEW LANBIAO INTELLIGENT TECHNOLOGY CO.,LTD

Print This Approval


#2204115

Wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlets incorporate plastic flow straightener, and the inlet incorporates a plastic filter. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2204115
Size:
½” BSP (M)
Marking:
Delabie on end of spout
Installation Requirements:
R001 R040 R570
Expiry date:
30/04/2027
Model:
443406SY

Approval Holder:
Syspal
Company Name
Syspal
Address
Cockshutt Lane Broseley Shropshire
Postcode
TF12 5JA

View All Listings by this Company

Print This Approval


#251202710

Bottom entry or side entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns with a plastic body and a plastic flow regulator at the inlet. Maximum working pressure 10.0 Bar Cold water use

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
251202710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
IRN R560 applies to the bottom entry model only
Size:
½” BSP (M)
Marking:
NAT logo and BS1212-4 on float , datum level on valve body.
Installation Requirements:
R001 R550 R560
Expiry date:
31/12/2030
Model:
NA206 AG Bottom Fill Valve NA306 AG Side Fill Valve

Approval Holder:
Xiamen Nat Plumbing Inc.
Company Name
Xiamen Nat Plumbing Inc.
Address
UNIT 2, 5TH FLR. NO.18‐8 XIAFEI ROAD, HAICANG DISTRICT, 361028 XIAMEN, P. R. CHINA
Country
China
Phone
86-592-6538317

View All Listings by this Company

Print This Approval


#251202711

Range of WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
251202711
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
WDI, ECO and model inside cistern, 6 litre line inside cistern. WDI on operation member
Installation Requirements:
R001 R556
Expiry date:
31/12/2030
Model:
K133-A01-E01002 K133-A01-E01003 K133-A02-E01002 K133-A02-E01003 K133-D01-E01002 K133-D01-E01003

Approval Holder:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#260101701

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
260101701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male
Marking:
Cap of Syphon marked ‘Cascade +’ or ‘Dudley Turbo’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. T. Dudley BS1212 part 3 on front face of back plate
Installation Requirements:
R001 R280
Expiry date:
31/01/2031
Model:
Slimline WC Cistern.

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#260101702

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a lever. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
260101702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP M
Marking:
Cap of Syphon marked ‘Cascade +’ or ‘Dudley Turbo’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. T. Dudley BS1212 part 3 on front face of back plate
Installation Requirements:
R001 R280
Expiry date:
31/01/2031
Model:
Mirage WC Cistern.

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#260101703

BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
260101703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male or 15mm Push-fit Inlet connection.
Marking:
Splash cover marked Dudley. Top of Pneumatic drop valve is marked ‘Dudley’ Top of Cable Operated Drop Valve marked ‘Dudley’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R280
Expiry date:
31/01/2031
Model:
OBC Concealed Cistern (Category 3)

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#260101704

BS EN 14055: 2018 concealed WC cistern incorporating a side entry compact type float operated inlet valve providing a Type AB air gap with a Pneumatic or Cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2034 Cistern - Flushing
Section Subtitle:
Incorporating Type AB air gap, providing fluid category 5 backflow protection. Suitable for use in a WC suite.
WRAS Approval Number:
260101704
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male or 15mm Push-fit Inlet connection.
Marking:
Splash cover marked Dudley. Top of Pneumatic drop valve is marked ‘Dudley’ Top of Cable Operated Drop Valve marked ‘Dudley’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R280
Expiry date:
31/01/2031
Model:
OBC Concealed Cistern (Category 5).

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#260102004

Range of multi-layer shower hoses with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60.0°C Open outlet use only.

Section:
1660 Shower Outlets
Section Subtitle:
Shower hose(s)
WRAS Approval Number:
260102004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F) conical or captive nut.
Marking:
Solex on ferrule.
Installation Requirements:
R001 R040
Expiry date:
31/01/2031
Model:
H21X0007S-01 H21X0007S-02 H21X0007S-03 H21X0007S-04 H21X0007S-05 X: denote the length of hose. Range from 500mm to 2200mm(0.5m-2.2m)

Approval Holder:
Xiamen Solex High-Tech Industries Co., Ltd.
Company Name
Xiamen Solex High-Tech Industries Co., Ltd.
Address
No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022
Country
China
General Email
brian_lin@mysolex.com

View All Listings by this Company

Print This Approval


#251212302

Section:
0400 Combination Tap Assemblies - Bidet
Description:
A Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
Deck mounted. Stainless-steel braided EPDM lined flexible inlet hose assemblies. Capable of achieving AUK3 Tap Gap.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R006 R010
Expiry date:
31/12/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
5001JC45-1Chrome1/2 BSP(F)10 bar85 °CHUANRIBODYNoCeramic cartridgeC-plateAerator

Approval Holder:
Zhejiang Huanri Sanitation Co,.Ltd.
Company Name
Zhejiang Huanri Sanitation Co,.Ltd.
Address
Xuanmen Industrial Zone, Lupu Town Yuhuan County Zhejiang Province
Country
China

View All Listings by this Company
Manufacturers:
Zhejiang Huanri Sanitation Co,.Ltd.

Print This Approval



Back To Directory Sections

Page 614 of 653

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.