Uponor S-Press (black and grey) composite fittings, Uponor S-Press composite PPSU reducers with S-Press PLUS composite PPSU nipples, Uponor RS fittings & Uponor S Press Metal Press fittings for use with for use with Uponor MLC pipe. Maximum working pressure and operating temperature: 10.0 bar@70°C Maximum working pressure and operating temperature: 16.0 bar @ Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101908

Size:

Uponor MLC Pipe (40 – 110mm) Uponor S-Press composite PPSU fittings (40 – 75mm) Uponor S-Press composite PPSU reducers with S-Press PLUS composite PPSU nipples 20, 25, 32mm Uponor RS Fittings (63 – 110mm) Uponor S-Press Metal Press fittings (40 -75mm)

Marking:

Uponor or U on fitting. Uponor MLCP and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

S-Press composite fittings PPSU 1046401 Uponor S-Press composite coupling PPSU 40-40 1046402 Uponor S-Press composite coupling PPSU 50-50 1032881 Uponor S-Press composite coupling PPSU 63-63 1032882 Uponor S-Press composite coupling PPSU 75-75 1046406 Uponor S-Press composite reducer PPSU 50-40 1032883 Uponor S-Press composite reducer PPSU 63-40 1032884 Uponor S-Press composite reducer PPSU 63-50 1032885 Uponor S-Press composite reducer PPSU 75-50 1032886 Uponor S-Press composite reducer PPSU 75-63 1046386 Uponor S-Press composite elbow PPSU 40-40 1046387 Uponor S-Press composite elbow PPSU 50-50 1032877 Uponor S-Press composite elbow PPSU 63-63 1032878 Uponor S-Press composite elbow PPSU 75-75 1046388 Uponor S-Press composite elbow 45° PPSU 40-40 1046389 Uponor S-Press composite elbow 45° PPSU 50-50 1032879 Uponor S-Press composite elbow 45° PPSU 63-63 1032880 Uponor S-Press composite elbow 45° PPSU 75-75 1046390 Uponor S-Press composite tee PPSU 40-40-40 1046391 Uponor S-Press composite tee PPSU 50-50-50 1032887 Uponor S-Press composite tee PPSU 63-63-63 1032888 Uponor S-Press composite tee PPSU 75-75-75 1046400 Uponor S-Press composite tee reducer PPSU 50-40-50 1032891 Uponor S-Press composite tee reducer PPSU 63-40-63 1032893 Uponor S-Press composite tee reducer PPSU 75-40-75 1032894 Uponor S-Press composite tee reducer PPSU 75-50-75 S-Press composite fittings PPSU (40, 50, 63 and 75 mm) with reducers design (nipples) of S-Press PLUS PPSU composite fittings 20, 25 and 32 mm 1039941 Uponor S-Press reducer PPSU 40-25 1039942 Uponor S-Press reducer PPSU 40-32 1039943 Uponor S-Press reducer PPSU 50-32 1039962 Uponor S-Press tee red. PPSU 40-20-40 1039963 Uponor S-Press tee red. PPSU 40-25-32 1039964 Uponor S-Press tee red. PPSU 40-25-40 1039965 Uponor S-Press tee red. PPSU 40-32-32 1039966 Uponor S-Press tee red. PPSU 40-32-40 1039967 Uponor S-Press tee red. PPSU 50-25-40 1039968 Uponor S-Press tee red. PPSU 50-25-50 1039969 Uponor S-Press tee red. PPSU 50-32-50 1032889 Uponor S-Press composite tee reducer PPSU 63-25-63 1032890 Uponor S-Press composite tee reducer PPSU 63-32-63 1032892 Uponor S-Press composite tee reducer PPSU 75-32-75 Uponor RS adapters (40-110 mm) and Uponor RS adapters (16, 20, 25, 32) 1029138 Uponor RS elbow RS2-RS2 1029139 Uponor RS elbow RS3-RS3 1029140 Uponor RS elbow 45° RS2-RS2 1029141 Uponor RS elbow 45° RS3-RS3 1029142 Uponor RS tee RS2-RS2-RS2 1029143 Uponor RS tee RS3-RS3-RS3 1059397 Uponor RS adapter S-Press 16-RS2 1095818 Uponor RS adapter S-Press PLUS 20-RS2 1095819 Uponor RS adapter S-Press PLUS 25-RS2 1095820 Uponor RS adapter S-Press PLUS 32-RS2 1046940 Uponor RS adapter S-Press 40-RS2 1046941 Uponor RS adapter S-Press 50-RS2 1029125 Uponor RS adapter S-Press 63-RS2 1029126 Uponor RS adapter S-Press 75-RS2 1029127 Uponor RS adapter S-Press 90-RS3 1029128 Uponor RS adapter S-Press 110-RS3 1059403 Uponor RS adapter female thread Rp1/2"FT-RS2 1059404 Uponor RS adapter female thread Rp1/2"FT-RS3 1029134 Uponor RS adapter female thread Rp1"FT-RS2 1029136 Uponor RS adapter female thread Rp2 1/2"FT-RS2 1029135 Uponor RS adapter female thread Rp2"FT-RS2 1029137 Uponor RS adapter female thread Rp3"FT-RS3 1059402 Uponor RS adapter male thread R1 1/2"MT-RS2 1029132 Uponor RS adapter male thread R2 1/2"MT-RS2 1029131 Uponor RS adapter male thread R2"MT-RS2 1029133 Uponor RS adapter male thread R3"MT-RS3 1029144 Uponor RS coupling RS2-RS2 1029145 Uponor RS coupling RS3-RS3 1029146 Uponor RS reducer RS3-RS2 1059399 Uponor RS flange adapter RS2-DN65 (PN16) 1029130 Uponor RS flange adapter RS3-DN100 (PN16) 1029129 Uponor RS flange adapter RS3-DN80 (PN16) 1046477 Uponor RS spacer RS2-RS2 l=130mm 1046750 Uponor RS spacer RS2-RS2 l=5mm 1046478 Uponor RS spacer RS3-RS3 l=210mm 1046751 Uponor RS spacer RS3-RS3 l=5mm Uponor S-Press fitting 40, 50, 63, 75 mm 1046932 Uponor S-Press coupling 40-40 1046935 Uponor S-Press coupling 50-50 1046934 Uponor S-Press reducer 50-40 1046908 Uponor S-Press elbow 40-40 1046911 Uponor S-Press elbow 50-50 1046913 Uponor S-Press elbow 45° 40-40 1046914 Uponor S-Press elbow 45° 50-50 1046921 Uponor S-Press tee 40-40-40 1046928 Uponor S-Press tee 50-50-50 1046904 Uponor S-Press adapter female thread 40-Rp1 1/2"FT 1046903 Uponor S-Press adapter female thread 40-Rp1 1/4"FT 1046907 Uponor S-Press adapter female thread 50-Rp1 1/2"FT 1046901 Uponor S-Press adapter male thread 40-R1 1/4"MT 1046902 Uponor S-Press adapter male thread 40-R1 1/2"MT 1046905 Uponor S-Press adapter male thread 50-R1 1/2"MT 1046906 Uponor S-Press adapter male thread 50-R2"MT 1032895 Uponor S-Press adapter male thread 63-R2"MT 1032896 Uponor S-Press adapter male thread 75-R2 1/2"MT 1046937 Uponor S-Press adapter swivel nut 40-G1 1/2"SN 1060094 Uponor S-Press adapter swivel nut 40-G1 1/4"SN 1060095 Uponor S-Press adapter swivel nut 50-G1 1/2"SN 1046938 Uponor S-Press adapter swivel nut 50-G1 3/4"SN 1046939 Uponor S-Press adapter swivel nut 50-G2"SN 1046910 Uponor S-Press elbow adap. female thread 40-Rp1 1/2"FT 1046912 Uponor S-Press elbow adap. female thread 50-Rp1 1/2"FT 1046909 Uponor S-Press elbow adapter male thread 40-R1 1/4"MT 1046922 Uponor S-Press tee adapter female thread 40-Rp1/2"FT-40 1046923 Uponor S-Press tee adapter female thread 40-Rp3/4"FT-40 1046929 Uponor S-Press tee adapter female thread 50-Rp1"FT-50

Product Images

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Manufacturer:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101334

Size:

see model

Marking:

Dunshan Press and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

DS2001‐15 Equal coupling 15mm DS2001‐18 Equal coupling 18mm DS2001‐22 Equal coupling 22mm DS2001‐28 Equal coupling 28mm DS2001‐35 Equal coupling 35mm DS2001‐42 Equal coupling 42mm DS2001‐54 Equal coupling 54mm DS2002‐15 Adjustable coupling 15mm DS2002‐18 Adjustable coupling 18mm DS2002‐22 Adjustable coupling 22mm DS2002‐28 Adjustable coupling 28mm DS2002‐35 Adjustable coupling 35mm DS2002‐42 Adjustable coupling 42mm DS2002‐54 Adjustable coupling 54mm DS2003‐15 90° equal elbow 15mm DS2003‐18 90° equal elbow 18mm DS2003‐22 90° equal elbow 22mm DS2003‐28 90° equal elbow 28mm DS2003‐35 90° equal elbow 35mm DS2003‐42 90° equal elbow 42mm DS2003‐54 90° equal elbow 54mm DS2004‐15 90° plain elbow‐B 15mm DS2004‐18 90° plain elbow‐B 18mm DS2004‐22 90° plain elbow‐B 22mm DS2004‐28 90° plain elbow‐B 28mm DS2004‐35 90° plain elbow‐B 35mm DS2004‐42 90° plain elbow‐B 42mm DS2004‐54 90° plain elbow‐B 54mm DS2005‐15 45° equal elbow 15mm DS2005‐18 45° equal elbow 18mm DS2005‐22 45° equal elbow 22mm DS2005‐28 45° equal elbow 28mm DS2005‐35 45° equal elbow 35mm DS2005‐42 45° equal elbow 42mm DS2005‐54 45° equal elbow 54mm DS2006‐15 45° plain elbow‐B 15mm DS2006‐18 45° plain elbow‐B 18mm DS2006‐22 45° plain elbow‐B 22mm DS2006‐28 45° plain elbow‐B 28mm DS2006‐35 45° plain elbow‐B 35mm DS2006‐42 45° plain elbow‐B 42mm DS2006‐54 45° plain elbow‐B 54mm DS2007‐15 Equal tee 15mm DS2007‐18 Equal tee 18mm DS2007‐22 Equal tee 22mm DS2007‐28 Equal tee 28mm DS2007‐35 Equal tee 35mm DS2007‐42 Equal tee 42mm DS2007‐54 Equal tee 54mm DS2008‐18*15 Reducing tee 18mm×15mm DS2008‐22*15 Reducing tee 22mm×15mm DS2008‐22*18 Reducing tee 22mm×18mm DS2008‐28*15 Reducing tee 28mm×15mm DS2008‐28*18 Reducing tee 28mm×18mm DS2008‐28*22 Reducing tee 28mm×22mm DS2008‐35*15 Reducing tee 35mm×15mm DS2008‐35*18 Reducing tee 35mm×18mm DS2008‐35*22 Reducing tee 35mm×22mm DS2008‐35*28 Reducing tee 35mm×28mm DS2008‐42*15 Reducing tee 42mm×15mm DS2008‐42*18 Reducing tee 42mm×18mm DS2008‐42*22 Reducing tee 42mm×22mm DS2008‐42*28 Reducing tee 42mm×28mm DS2008‐42*35 Reducing tee 42mm×35mm DS2008‐54*15 Reducing tee 54mm×15mm DS2008‐54*18 Reducing tee 54mm×18mm DS2008‐54*22 Reducing tee 54mm×22mm DS2008‐54*28 Reducing tee 54mm×28mm DS2008‐54*35 Reducing tee 54mm×35mm DS2008‐54*42 Reducing tee 54mm×42mm DS2009‐15*Rp1/2 Female coupling 15mm×Rp1/2’’ DS2009‐22*Rp3/4 Female coupling 22mm×Rp3/4” DS2009‐28*Rp1 Female coupling 28mm×Rp1” DS2009‐35*Rp1 1/4 Female coupling 35mm×Rp1‐“1/4” DS2009‐42*Rp1 1/2 Female coupling 42mm×Rp1‐1/2” DS2009‐54*Rp2 Female coupling 54mm×Rp2” DS2010‐15*G1/2 Rotatable coupling 15mm×G1/2” DS2010‐18*G1/2 Rotatable coupling 18mm×G1/2” DS2010‐22*G3/4 Rotatable coupling 22mm×G3/4” DS2010‐28*G1 Rotatable coupling 28mm×G1” DS2010‐35*G1 1/4 Rotatable coupling 35mm×G1‐1/4” DS2010‐42*G1 1/2 Rotatable coupling 42mm×G1‐1/2” DS2010‐54*G2 Rotatable coupling 54mm×G2” DS2011‐15*R1/2 Male coupling 15mm×R1/2” DS2011‐18*R1/2 Male coupling 18mm×R1/2” DS2011‐22*R3/4 Male coupling 22mm×R3/4” DS2011‐28*R1 Male coupling 28mm×R1” DS2011‐35*R1 1/4 Male coupling 35mm×R1‐1/4” DS2011‐42*R1 1/2 Male coupling 42mm×R1‐1/2” DS2011‐54*R2 Male coupling 54mm×R2” DS2012‐15*Rp1/2 Female elbow 15mm×Rp1/2” DS2012‐18*Rp1/2 Female elbow 18mm×Rp1/2” DS2012‐22*Rp3/4 Female elbow 22mm×Rp3/4” DS2012‐28*Rp1 Female elbow 28mm×Rp1” DS2012‐35*Rp1 1/4 Female elbow 35mm×Rp1‐1/4” DS2012‐42*Rp1 1/2 Female elbow 42mm×Rp1‐1/2” DS2012‐54*Rp2 Female elbow 54mm×Rp2” DS2013‐15*R1/2 Male elbow 15mm×R1/2” DS2013‐18*R1/2 Male elbow 18mm×R1/2” DS2013‐22*R1/2 Male elbow 22mm×R1/2” DS2013‐22*R3/4 Male elbow 22mm×R3/4” DS2013‐28*R1 Male elbow 28mm×R1” DS2013‐35*R1 1/4 Male elbow 35mm×R1‐1/4” DS2013‐42*R1 1/2 Male elbow 42mm×R1‐1/2” DS2013‐54*R2 Male elbow 54mm×R2” DS2014‐15*Rp1/2 Female tee 15mm×Rp1/2” DS2014‐18*Rp1/2 Female tee 18mm×Rp1/2” DS2014‐22*Rp3/4 Female tee 22mm×Rp3/4” DS2014‐28*Rp1/2 Female tee 28mm×Rp1/2 DS2014‐28*Rp1 Female tee 28mm×Rp1” DS2014‐35*Rp1 1/4 Female tee 35mm×Rp1‐1/4” DS2014‐42*Rp1 1/2 Female tee 42mm×Rp1‐1/2” DS2014‐54*Rp2 Female tee 54mm×Rp2” DS2015‐15*R1/2 Male tee 15mm×R1/2” DS2015‐18*R1/2 Male tee 18mm×R1/2” DS2015‐22*R3/4 Male tee 22mm×R3/4” DS2015‐28*R1/2 Male tee 28 mm×R1/2’’ DS2015‐28*R1 Male tee 28mm×R1” DS2015‐35*R1 1/4 Male tee 35mm×R1‐1/4” DS2015‐42*R1 1/2 Male tee 42mm×R1‐1/2” DS2015‐54*R2 Male tee 54mm×R2” DS2016‐18*15 Reducer‐A 18mm×15mm DS2016‐22*15 Reducer‐A 22mm×15mm DS2016‐22*18 Reducer‐A 22mm×18mm DS2016‐28*15 Reducer‐A 28mm×15mm DS2016‐28*18 Reducer‐A 28mm×18mm DS2016‐28*22 Reducer‐A 28mm×22mm DS2016‐35*15 Reducer‐A 35mm×15mm DS2016‐35*18 Reducer‐A 35mm×18mm DS2016‐35*22 Reducer‐A 35mm×22mm DS2016‐35*28 Reducer‐A 35mm×28mm DS2016‐42*15 Reducer‐A 42mm×15mm DS2016‐42*18 Reducer‐A 42mm×18mm DS2016‐42*22 Reducer‐A 42mm×22mm DS2016‐42*28 Reducer‐A 42mm×28mm DS2016‐42*35 Reducer‐A 42mm×35mm DS2016‐54*42 Reducer‐A 54mm×42mm DS20107‐18*15 Reducer Coupling‐B 18mm×15mm DS20107‐22*15 Reducer Coupling‐B 22mm×15mm DS20107‐22*18 Reducer Coupling‐B 22mm×18mm DS20107‐28*15 Reducer Coupling‐B 28mm×15mm DS20107‐28*18 Reducer Coupling‐B 28mm×18mm DS20107‐28*22 Reducer Coupling‐B 28mm×22mm DS20107‐35*15 Reducer Coupling‐B 35mm×15mm DS20107‐35*18 Reducer Coupling‐B 35mm×18mm DS20107‐35*22 Reducer Coupling‐B 35mm×22mm DS20107‐35*28 Reducer Coupling‐B 35mm×28mm DS20107‐42*15 Reducer Coupling‐B 42mm×15mm DS20107‐42*18 Reducer Coupling‐B 42mm×18mm DS20107‐42*22 Reducer Coupling‐B 42mm×22mm DS20107‐42*28 Reducer Coupling‐B 42mm×28mm DS20107‐42*35 Reducer Coupling‐B 42mm×35mm DS20107‐54*15 Reducer Coupling‐B 54mm×15mm DS20107‐54*18 Reducer Coupling‐B 54mm×18mm DS20107‐54*22 Reducer Coupling‐B 54mm×22mm DS20107‐54*28 Reducer Coupling‐B 54mm×28mm DS20107‐54*35 Reducer Coupling‐B 54mm×35mm DS20107‐54*42 Reducer Coupling‐B 54mm×42mm

Product Images

Approval Holder:

Wenzhou Dunshan EPT Co.,Ltd.

Company Name

Wenzhou Dunshan EPT Co.,Ltd.

Address

Building B, No. 500, Lingde Road, Kunpeng Street, Oujiangkou Industrial Cluster, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Manufacturer:

Wenzhou Dunshan EPT Co.,Ltd.

Company Name

Wenzhou Dunshan EPT Co.,Ltd.

Address

Building B, No. 500, Lingde Road, Kunpeng Street, Oujiangkou Industrial Cluster, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Range of polypropylene push-fit fittings and inserts for use with MDPE pipe (manufactured to BS EN 12201). For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101004

Size:

20mm & 25mm

Marking:

PN, JG and size on body

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

UG101B - 20 x 1/2" BSP MALE ADAPTOR UG102B - 25 x 3/4" BSP MALE ADAPTOR UG201B - 20mm EQUAL TEE UG202B - 25mm EQUAL TEE UG222025B - 20 x 25mm STEM ELBOW UG222525B - 25 x 25mm STEM ELBOW UG301B - 20mm EQUAL ELBOW UG302B - 25mm EQUAL ELBOW UG401B - 20mm EQUAL STRAIGHT CONNECTOR UG402B - 25mm EQUAL STRAIGHT CONNECTOR UG4501B - 20 x 1/2" FEMALE ADAPTOR UG4502B - 25 X 3/4" FEMALE ADAPTOR UG4620B - 20mm STOP END UG4625B - 25mm STOP END UG501B - 25 x 20mm REDUCING STRAIGHT CONNECTOR UG801E - 20mm PLUG UG802E - 25mm PLUG UGPWB1514 - 15 x 1/2" WING BACK ELBOW UGPWB2014 - 20 x 1/2" BACK PLATE ELBOW UGPWB2514 - 25 x 1/2" BACK PLATE ELBOW UGPWB2516 - 25 x 3/4" BACK PLATE ELBOW UTS147-DB - 20MM PIPE INSERT UTS197-DB- 25MM PIPE INSERT

Product Images

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of polypropylene push-fit fittings with inserts for use with MDPE Pipe (manufactured to BS EN 12201-2) on one side of the fitting and PB (BS 7291), PEX (BS 7291) or Copper (BS EN 1057) on the other. Models UTS147-DB, UTS197-DB & UTS251-DB are for above and below ground use. All other models are for above ground use only. Maximum working pressure when using 20mm pipe is 16.0 bar. Maximum working pressure when using 25mm & 32mm pipe is 12.5 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101045

Marking:

PN, JG & size on protective cap.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Above ground use only. UG601B - 20 x 15MM PE-COPPER COUPLER. UG602B - 25 x 22MM PE-COPPER COUPLER. UG603B - 25 x 15MM PE-COPPER COUPLER. UG604B - 32 x 28MM PE-COPPER COUPLER. UG063228B - 32 X 28MM REDUCER. Above and below ground use. UTS147-DB - 20MM PIPE INSERT UTS197-DB - 25MM PIPE INSERT UTS251-DB - 32MM PIPE INSERT

Product Images

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

WC dual flush outlet valve with plastic body silicone rubber seal. The valve is operated via a lift assembly with an either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2103008

Size:

48mm

Marking:

Bestter and model on valve body.

Installation Requirements:

R001 R571

Expiry date:

31/03/2026

Model:

T8700

Product Images

Approval Holder:

Bestter(Xiamen) Technology lnc.

Company Name

Bestter(Xiamen) Technology lnc.

Address

No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company

Manufacturer:

Bestter(Xiamen) Technology lnc.

Company Name

Bestter(Xiamen) Technology lnc.

Address

No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company

Range of stainless-steel heat exchangers. Maximum working pressure of primary Circuit 3.0 bar. Maximum working pressure of secondary Circuit 10.0 bar. Maximum operating temperature 80˚C

Section:

1350 Heat Exchangers

Size:

Primary Circuit ¾” captive nut x ¾” BSP (M) Sanitary Circuit 21mm (OD) Spigot Fitting x ½” BSP (M)

Marking:

Condevo SpA, serial number and date of manufacture (DD/MM/YY) on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Type E 12439 PP11CE6V02, PP21CE6V02 & PP33CE6V02. Type E 12440 PP10CE6H02, PP22CE6H02 & PP34CE6H02.

Product Images

Approval Holder:

Condevo SpA

Company Name

Condevo SpA

Address

Via Luna, Z.A. 26866 Marudo (LO) Italy

View All Listings by this Company

Manufacturer:

Condevo SpA

Company Name

Condevo SpA

Address

Via Luna, Z.A. 26866 Marudo (LO) Italy

View All Listings by this Company

Gas fired water heaters incorporating a heat exchanger and flow sensor. The inlet incorporates a plastic strainer. The products are supplied with isolation valves for installation on the cold inlet and hot outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60˚C

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

2101041

Size:

15mm Compression

Marking:

ECA on front of body. ECA. Model & technical information on adhesive label on side of body.

Installation Requirements:

R001 R140

Expiry date:

31/01/2026

Model:

8116180100 – Phoenix PH 11LT Water Heater.

Product Images

Approval Holder:

Emas Makina Sanayi A.S.

Company Name

Emas Makina Sanayi A.S.

Address

Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa

Postcode

45030

Country

Turkey

General Email

egecakmakci@emas.com.tr

View All Listings by this Company

Manufacturer:

Emas Makina Sanayi A.S.

Company Name

Emas Makina Sanayi A.S.

Address

Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa

Postcode

45030

Country

Turkey

General Email

egecakmakci@emas.com.tr

View All Listings by this Company

LCB700 range of internal and external oil-fired condensing combination boilers providing domestic hot water and pressurised central heating via a plate heat exchanger. The products are supplied with a temporary filling loop which incorporates a combined isolation valve and double check valve assembly (suitable for backflow protection against Fluid Category 3), stainless steel braided EPDM lined flexible hose assembly and an isolation valve. The primary (space heating) circuit incorporates an expansion vessel and a pressure relief valve (set at 3.0 bar). Operating parameters: Primary (space heating) circuit: Maximum working pressure 2.5 Bar. Maximum operating temperature 105°C. Secondary (DHW) circuit: Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2101042

Size:

Primary (space heating) circuit: 22mm pushfit. Secondary (DHW) circuit: 15mm pushfit.

Marking:

Navien, model and technical information on adhesive label on rear of front cover.

Installation Requirements:

R001 R140 R360 R430

Expiry date:

31/01/2026

Model:

Internal: LCB700-21LC. LCB700-28LC. LCB700-36LC. External: LCB700-21LCX. LCB700-28LCX. LCB700-36LCX

Product Images

Approval Holder:

KD Navien Co Ltd

Company Name

KD Navien Co Ltd

Address

4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea

Phone

+82 2 3489 2200

General Email

www.navien.com

View All Listings by this Company

Range of ice making machines which incorporate a solenoid valve to control the flow. Maximum working pressure 5.0 bar. Cold water use only.

Section:

1500 Ice Making Machines

Size:

¾” BSP Captive nut.

Marking:

Model, date of production (YYMM) and other technical information on rear panel. Simag on front of machine.

Installation Requirements:

R001 R009 R150 R171 R511

Expiry date:

31/01/2026

Model:

SIMAG SDE 18, 24, 30, 34, 40, 50, 64, 84, 100, 170 & 220. SIMAG SDH 18, 24, 30, 40, 50 & 64.

Product Images

Approval Holder:

Scotsman Ice S.r.l.

Company Name

Scotsman Ice S.r.l.

Address

Via Lainate 31, 20010 Pogliano Milanese (MI)

Country

Italy

View All Listings by this Company

Manufacturer:

Scotsman Ice S.r.l.

Company Name

Scotsman Ice S.r.l.

Address

Via Lainate 31, 20010 Pogliano Milanese (MI)

Country

Italy

View All Listings by this Company

Range of commercial ice making machines which incorporate a solenoid valve controlling the flow. Maximum working pressure 7.8 bar. Cold water use only.

Section:

1500 Ice Making Machines

Size:

PVC lined flexible hose assembly with ¾” BSP captive nut end connections.

Marking:

Hoshizaki on front panel & door. Hoshizaki, model & operating info on adhesive label on side.

Installation Requirements:

R001 R150 R511

Expiry date:

31/01/2026

Model:

IM-21CNE-HC IM-30CNE-HC IM-30CNE-HC-25 IM-45NE-HC IM-45NE-HC-25 IM-45CNE-HC IM-45CNE-HC-25 IM-65NE-HC IM-65NE-HC-25 DIM-40DE-HC

Product Images

Approval Holder:

Hoshizaki Europe Ltd

Company Name

Hoshizaki Europe Ltd

Address

Telford 70 Stafford Park 7 Telford

Postcode

TF3 3BQ

Country

Shropshire

View All Listings by this Company

Manufacturer:

Hoshizaki Europe Ltd

Company Name

Hoshizaki Europe Ltd

Address

Telford 70 Stafford Park 7 Telford

Postcode

TF3 3BQ

Country

Shropshire

View All Listings by this Company

Range of water meters with plastic or brass bodies. The inlets incorporate a plastic strainer. Maximum working pressure 16.0 bar. RTKD range has a maximum operating temperature of 50°C. RTKD-L range has a maximum operating temperature of 30°C.

Section:

1505 Water Meters

Size:

RTKD range: ¾” - 1½” BSP (M). RTKD-L range: ¾” - 1” BSP (M).

Marking:

Flow arrow on body. Zenner and date of manufacture (YYYY) on meter case.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

RTKD range (brass body). RTKD-L range (plastic body).

Product Images

Approval Holder:

Zenner International Gmbh & Co. KG

Company Name

Zenner International Gmbh & Co. KG

Address

Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany

Country

Germany

View All Listings by this Company

Manufacturer:

Zenner Meters (Shanghai) Ltd.

Company Name

Zenner Meters (Shanghai) Ltd.

Address

No 15 Dongxing Road Songjiang Ind Zone Shanghai

Country

China

View All Listings by this Company

Ultrasonic water meter with a blue epoxy coated ductile iron body and EPDM ‘O’ rings. Maximum working pressure 16.0 Bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Size:

DN50-200 Flanged

Marking:

NWM logo, size and model on dial face. Flow arrow and DN on valve body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

UL-BW

Product Images

Approval Holder:

Ningbo Water Meter (Group) Co., Ltd

Company Name

Ningbo Water Meter (Group) Co., Ltd

Address

No 355 Hongxing Road Jiangbei District Ningbo

Country

China

View All Listings by this Company

Manufacturer:

Ningbo Water Meter (Group) Co., Ltd

Company Name

Ningbo Water Meter (Group) Co., Ltd

Address

No 355 Hongxing Road Jiangbei District Ningbo

Country

China

View All Listings by this Company

Range of rotating piston, volumetric in-line water meters with brass bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

¾” BSP - 2” BSP (M) inlet and outlet.

Marking:

Elster on lid. Elster and technical information on body.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

V100 - DN15, 20, 25, 30 & 40

Product Images

Approval Holder:

Elster Water Metering Limited

Company Name

Elster Water Metering Limited

Address

130 Camford Way Sundon Park Luton

Postcode

LU3 3AN

Country

United Kingdom

Phone

01582 846 400

General Email

matthew.ward@honeywell.com

View All Listings by this Company

Manufacturer:

Elster Water Metering Limited

Company Name

Elster Water Metering Limited

Address

130 Camford Way Sundon Park Luton

Postcode

LU3 3AN

Country

United Kingdom

Phone

01582 846 400

General Email

matthew.ward@honeywell.com

View All Listings by this Company

Water meter incorporating a brass inner body, a plastic outer body and liquid silicone ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Size:

DN15 - 40.

Marking:

Bmeters, serial number and technical information on meter face. Size and flow arrow on water meter body.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

Hydrosonic range Sizes: DN15 is available in 110mm, 130mm, 145mm and 165mm lengths. DN20 is available in 130mm and 190mm lengths. DN25 is available in 260mm length only. DN32 is available in 260mm length only. DN40 is available in 300mm length only.

Product Images

Approval Holder:

BMETERS Srl.

Company Name

BMETERS Srl.

Address

Via Friuli No. 3 33050 Gonars (UD) Italy

Phone

+39 0432931415

View All Listings by this Company

Manufacturer:

BMETERS Srl.

Company Name

BMETERS Srl.

Address

Via Friuli No. 3 33050 Gonars (UD) Italy

Phone

+39 0432931415

View All Listings by this Company

Range of water meter manifolds with plastic bodies. The inlets incorporate a spherical valve and a non-return valve (not suitable for back flow protection). Model MD1010101BM is for use with Irish Heavy gauge pipe manufactured to 15134/1977. All other models are for use with blue MDPE pipe manufactured to EN12201. Maximum working pressure 12.5 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Size:

see model

Marking:

Ebco and flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

28/02/2026

Model:

MB1012525BM: 25mm pushfit. MB1010202BM: 20mm pushfit. MB1010101BM: ½” Irish pushfit. MB1020303BM: ¾” BSP (F).

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Range of water meter manifolds with a plastic body and a spherical valve at the inlet. Models MB2012525DM & MB2010303DM incorporates two single check valve cartridges, all other models incorporate one single check valve however, the complete product has not been fully tested to demonstrate it provides backflow protection Model MB201010BM is for use with Irish Heavy gauge pipe manufactured to 15134/1977. All other models are for use with blue MDPE pipe manufactured to EN12201. Maximum working pressure 12.5 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Size:

see mdoel

Marking:

Ebco and flow arrow on body

Installation Requirements:

R001 R008

Expiry date:

31/01/2026

Model:

MB2012525BM: 25mm pushfit. MB2012020BM: 20mm pushfit. MB2010101BM: ½” HG Irish compression. MB2010303BM: ¾” BSP (F). MB2011010BM: 25mm compression. MB2012525DM: 25mm pushfit. MB2010303DM: ¾” BSP (F).

Product Images

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

`Groundbreaker Mk3` water meter box incorporating a concentric water meter manifold (plastic body) with screw down stop valve, single check valve (verified by test as suitable for backflow prevention up to fluid category 2) & compression fittings. The product is intended to be installed upon the external wall of a premises and incorporates internal insulation (insulation not verified by test). For use with MDPE pipe (manufactured to EN12201). Maximum working pressure 12.0 bar. Cold water use only.

Section:

1525 Meter Chambers - Wall Mounted

Size:

25mm compression.

Marking:

Groundbreaker logo on cover

Installation Requirements:

R001 R415 R430

Expiry date:

1/05/2026

Model:

Groundbreaker Mk3

Approval Holder:

Steve Leigh & Associates Ltd

Company Name

Steve Leigh & Associates Ltd

Address

13 Farriers Road Stowmarket Suffolk

Postcode

IP14 2NS

Phone

01449 673 451

General Email

sales@groundbreaker.co.uk

View All Listings by this Company

Range of threaded fittings with either plain brass, nickel plated brass or chrome plated brass bodies. Maximum operating pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1530 Miscellaneous Fittings

Size:

Plain brass bodies: 1/8" to 4" BSP. Nickel plated or chrome plated brass bodies: 1/8" - 1" BSP.

Marking:

‘E’ (brand of factor) & size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

IDC 25 range comprising of: Hexagon Nipple M x M Thread Bush Mi x Fi Flanged Blanking Nut RUNNING NIPPLE M x M SPACER NIPPLE M x M BARREL NIPPLE M x M Pipe Nipple M x M Thread Fi x Mi adaptor Thread Fi xFi Straight Reduce M x M adaptor Straight reduce M x F adaptor Straight reduce F x F adaptor Blanking cap Blanking Plug Elbow F x F adaptor Elbow reduce F x F adaptor Elbow M x M adaptor Elbow F x M adaptor Elbow F x F Wall plate TEE F x F x F TEE Reduce F x F x F Cross F x F x F x F Straight Pipe union M x F Straight Pipe union F x F Elbow Pipe union F x F

Product Images

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co., Ltd.

Company Name

IDC Fluid Control Co., Ltd.

Address

No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Zhejiang, Taizhou City, Zhejiang Province, P. R.China

Country

China

General Email

View All Listings by this Company

Range of circulation valves and flow sensor valves with EPDM seals and O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 90ºC.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2101064

Note:

Please note that the flow sensors and master panel are not approved in their own right. They are to be used in conjunction with the named valves.

Size:

Please refer to model.

Marking:

Pressure & flow arrow on body. GF and technical info on adhesive label on casing.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Circulation valve LegioTherm 2T / article 9910.015 / (351 110 550): DN15 (¾” BSP (M) x ¾” BSP (M). Circulation valve LegioTherm 2T / article 9910.020 / (351 110 590): DN20 (1” BSP (M) x 1” BSP (M). Circulation valve LegioTherm 2T / article 9910.025 / (351 110 630): DN25 (1 ½” BSP (M) x 1 ½” BSP (M). To be used in conjunction with: Flow sensor (351 110 772 group / Part number 351 110 770). Master Panel (351 110 656).

Product Images

Approval Holder:

Georg Fischer JRG AG

Company Name

Georg Fischer JRG AG

Address

Hauptstrasse 130, CH-4450 Sissach

Country

Switzerland

General Email

michael.ries@georgfischer.com

View All Listings by this Company

Manufacturer:

Georg Fischer JRG AG

Company Name

Georg Fischer JRG AG

Address

Hauptstrasse 130, CH-4450 Sissach

Country

Switzerland

General Email

michael.ries@georgfischer.com

View All Listings by this Company

Range of pressure transmitters with stainless steel bodies. Maximum working pressures: DST-P140 model 25.0 bar, all other models 50.0 bar. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Size:

DST P100: ⅛” NPT (M) & ¼” BSP (M). DST P110: ¼” NPT (M) & ½” BSP (M). DST P140: ½” NPT (M). Size added June 2022: DST P140: ¼” BSP (M). Models Added December 2022: DST P140 G1/2: ½” BSP (M). DST P140 R1/4: ¼” BSPT (M). DST P146 1/4-18 NPT: ¼” NPT (M). DST P146 G1/2: ½” BSP (M).

Marking:

DANFOSS, model number, CE and operating pressure range on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Pressure Transmitter series DST P1XX: DST P100. DST P110. DST P140. Models added December 2022: DST P140. DST P146.

Product Images

Approval Holder:

Danfoss A/S

Company Name

Danfoss A/S

Address

Nordborgvej 81 6430 Nordborg

Country

Denmark

Phone

+74 88 22 22

General Email

danfoss@danfoss.com

View All Listings by this Company

Manufacturer:

Danfoss Tianjin Ltd & Danfoss Industries S.A. de C.V.

Company Name

Danfoss Tianjin Ltd & Danfoss Industries S.A. de C.V.

Address

Quanhui Road 9th Wuqing Development District Tianjin 300170 China 9th Wuqing Development District Tianjin

Postcode

300170

Country

China

General Email

View All Listings by this Company