Range of gate valves with blue epoxy coated ductile iron bodies, EPDM coated ductile iron wedge and EPDM seals. Valves are operated via a non-rising spindle headwork. Maximum working pressure 16.0 Bar Maximum operating temperature 100.0°C

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

250702057

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN65 to DN200 Flanged

Marking:

Xingda logo, size and pressure on body

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

GATE402001, GATE402002, GATE402003, GATE402004, GATE402005 & GATE402006,

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Yantai Xingda Valve Co Ltd

Company Name

Yantai Xingda Valve Co Ltd

Address

No. 1,Hengye Road, Qingyang Industrial Park, Fushan District, Yantai City, Shandong Province

General Email

View All Listings by this Company

Inlet control group with a DZR brass body, consisting of a pressure reducing valve and pressure relief valve (4.5, 6.0 or 8.0 Bar). The inlet incorporates a stainless-steel strainer, and the outlet incorporates an approved check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The product is for use with copper pipe to BS EN 1057. Outlet pressure range of the pressure reducing valve is 1.0 to 4.0 bar Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:

2345 Valves

Section Subtitle:

Special combination assemblies.

WRAS Approval Number:

250702718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

22mm compression

Marking:

Intatec logo, CR , flow arrow, PN & DN on body. Intatec logo, 6.0 bar & BSEN 14941 on cap.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

UVGS22GH06 UVGS22GH08 UVGS22GH45

Product Images

Range of floor standing, single hole, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to a shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 5 Bar Maximum operating temperature 65.0°C

Section:

0463 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout, incorporating a manual diverter to a shower outlet.

WRAS Approval Number:

250702036

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.

Marking:

Roxor on body

Installation Requirements:

R001 R020

Expiry date:

31/07/2030

Model:

Binsey BIN321 BIN421 BIN721 BIN821 BIN1521 Cyprus BIN321F BIN421F BIN721F BIN821F BIN1521F

Product Images

Manufacturer:

Ultra Finishing Ltd.

Company Name

Ultra Finishing Ltd.

Address

Raikes Lane Ind Est. Lancashire, BL3 2NH

Phone

01282 436934

View All Listings by this Company

Floor mounted, single outlet, combination tap assembly (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating member and a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3). The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose and handset. Maximum working pressure 5.0 Bar Maximum operating temperature 65.0°C

Section:

0466 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)

WRAS Approval Number:

250702005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP M

Marking:

Coalbrook logo on back of spout

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2030

Model:

XX 2001 YY XX denotes the trim and can be replaced with: DO – Domo DC – Decca Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

Country

United Kingdom

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. The HLDPMFWT and HLDPMFZT models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208809

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

BOSS, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

62250384, 62250395, 62250403, 62250414, 62250425 & 62250436 Elbow 90 degree C X C: 8mm-108mm. 62250447, 62250458, 62250469, 62250480, 62250491 & 62250510 Street Elbow 90 degree Ftg X C: 8mm-108mm. 62250318, 62250329, 62250340, 62250351, 62250362 & 62250373 Street Elbow 45 degree Ftg X C: 8mm-108mm. 62250255, 62250266, 62250277, 62250288, 62250299, 62250307 Elbow 45 degree C X C: 8mm-108mm. 62250008, 62250019, 62250030, 62250041, 62250052 & 62250063 Straight Coupling with groove C X C: 8mm-108mm. 62250074, 62250085, 62250104, 62250115, 62250126, 62250137, 62250148, 62250159, 62250170, 62250181, 62250192, 62250200, 62250211 & 62250222 Fitting Reducer Ftg X C: 8mm-108mm. 62250532, 62250543, 62250554, 62250565, 62250576 & 62250587 Equal TEE CxCxC: 8mm-108mm. 62250606, 62250617, 62250628, 62250639, 62250650, 62250661, 62250672, 62250683, 62250694, 62250702, 62250713, 62250724, 62250735, 62250746, 62250757, 62250768, 62250779, 62250790, 62250809 & 62250820 Reducing Tee CxCxC: 8mm-108mm. 62250831, 62250842, 62250853, 62250864, 62250875 & 62250886 Cap: 8mm-108mm. 62250905, 62250916, 62250927, 62250938, 62250949, 62250960, 62250971, 62250982, 6225099, 62251010, 62251021 & 62251032 Female Adapter C X C: 15mm x ½” NPT (F) - 54mm x 2” NPT (F). 62250521 Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. 62250233 & 62250244 Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company