Directory Search Results

Print List

#241102001

‘Rada’ electronically controlled thermostatic blending valve, with a stainless-steel body, EPDM ‘o’ rings and seals. Maximum working pressure; 13.8 Bar. Maximum operating temperature 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241102001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1” BSP (F).
Marking:
Rada logo & The Brain DRV25 on body.
Installation Requirements:
R001
Expiry date:
30/11/2029
Model:
1.1899.002 - DRV25 VALVE MODULE GL.

Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval


#240502028

Range of wall mounted thermostatic shower valves, (brass bodies - various finishes) incorporating two push button headworks controlling the flow to the hand shower or overhead shower outlet. The temperature is controlled independently via a thermostatic cartridge with single lever operating member which incorporates a manual override button. The inlets incorporate stainless steel strainers and approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 70.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240502028
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The product is supplied with a shower hose, handset and overhead shower.
Size:
½” BSP (M)
Marking:
Axor on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2029
Model:
27 984 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240502044

Range of wall mounted, concealed, thermostatic shower valves (brass bodied - chrome plated trim set), flow is controlled via a solenoid valve that is activated by an infrared sensor or touch sensor. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 8.0 Bar. Maximum operating temperature 65.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240502044
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
Stern logo on handle
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2029
Model:
Infrared Sensor 612280 612281 Touch Sensor 612253 612254
Product Images

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#240102064

Range of wall mounted, concealed, thermostatic shower blending valves with brass bodies and polished stainless-steel trim/faceplates. Flow is controlled by a single sequential headwork with a single lever operating member. The inlets of the H96BOX each incorporates a isolation valve and a plastic strainer. The 9639SRV and 9632SRV models incorporate a plastic strainer and a plastic flow regulator on each inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240102064
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
This approval does not include a shower hose and handset, or overhead shower outlet.
Size:
H9631 and H9631L models installed in conjunction with the H96BOX: ½” BSP (F). 9639SRV & 9632SRV models: ¾” BSP (M). Models added November 2024: ½” BSP (M)
Marking:
H9631 and H9631L models: Delabie on faceplate. H96BOX: Delabie on inside of box opening. 9639SRV and 9632SRV models: Delabie on operating member. Models added November 2024: Delabie on faceplate of H9631 and Delabie on inside of H96BOX
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2029
Model:
Recessed thermostatic sequential shower mixers: H9631, H9631L. Which must be installed in conjunction with: H96BOX recessed housing. Single control: 9639SRV, 9632SRV. Models added November 2024: H96CBOX H9633 H9633L
Product Images

Approval Holder:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company
Manufacturer:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

Print This Approval


#240402712

Range of pilot operated basic valves, main body only, with epoxy coated ductile iron bodies. Maximum operating pressure 16.0 bar. Maximum operating temperature 65°C.

Section:
2165 Valves
Section Subtitle:
Flow control, pilot operated control.
WRAS Approval Number:
240402712
Size:
DN40 up to DN1400 flanged inlet and outlet (see models)
Marking:
Cla-Val, flow arrow, DN and PN on body. Cla-Val, flow arrow, DN, PN and model number on data plate on flange.
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
NG1E 100-01KCOS (DN50 to DN600) TYTAN-S-100-701/KCOS (DN600 to DN800) TYTAN-M-100-701/KCOS (DN900 to DN1000) TYTAN-L-100-701/KCOS (DN1200 to DN1400) 100-G1E-01KCOS (DN40 to DN400) Description of suffix codes, where: ‘K’ = Generic prefix for any subsequent letters ‘C’ = Internally and Externally epoxy coated ‘O’ = Stainless steel studs and washers for the main valve ‘S’ = Stainless steel seat and Disc guides
Product Images

Approval Holder:
Cla-Val UK Ltd.
Company Name
Cla-Val UK Ltd.
Address
Dainton House 107 Goods Station Road Tunbridge Wells
Postcode
TN1 2DR
Country
United Kingdom
Phone
01892 514400
General Email
liam.kent@cla-val.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 599 of 820

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.