Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2207023

Range of cross and parallel flow water plate heat exchangers with stainless steel bodies. Maximum working pressure primary circuit: 3.0 bar, secondary circuit: 10.0 bar. Maximum operating temperature 80°C.

Section:: 1350 Heat Exchangers
Size:: 15.7mm ID
Marking:: CONDEVO SpA, model and date of manufacture (DD/MM/YY) on label on body.
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: Type “W” range of cross and parallel flow heat exchangers, model code is as follows: PP aaFWywRxx. Where: aa = number of plates (from 10 to 34 plates). F = parallel flow. W = identifies shape of plates. y = type of stainless steel, 4 for AISI304L and 6 for AISI316L w = type of coupling plate R (distance between holes 42mm), Q (only for crossed flow) Rxx = coupling plate with xx replaced with numbers denoting distance between holes.

Product Images

Approval Holder:: Condevo SpA

Company Name
Condevo SpA
Address
Via Luna, Z.A. 26866 Marudo (LO) Italy

View All Listings by this Company
Manufacturer:: Condevo SpA

Company Name
Condevo SpA
Address
Via Luna, Z.A. 26866 Marudo (LO) Italy

View All Listings by this Company

WRAS Approval Number: #2205321

Range of electric combination boilers providing heating and instantaneous hot water. The heating system incorporates an expansion vessel and pressure relief valve (set at 3.0 bar). The DHW inlet and outlet incorporate spherical servicing valves. Fittited with a CAB device keyless filling link, verifired by test, suitable for category 3 backlfow protection. Maximum working pressure on central heating circuit 2.5 bar & Domestic Hot Water 10bar. Maximum operating temperature 80°C

Section:: 1465 Heaters
Section Subtitle:: Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:: 2205321
Size:: 15mm compression x 22mm compression.
Marking:: E.C.A on front casing. Manufacturer, address, model no, QR code and other technical information on side panel.
Installation Requirements:: R001 R140
Expiry date:: 31/05/2027
Model:: 8116270010 - Arceus/Cure plus/Electus EK 12 MT UK, 8116271010 - Arceus/Cure plus/Electus EK 15 MT UK, 8116272010 - Arceus/Cure plus/Electus EK 18 MT UK 8116273010 - Arceus/Cure plus/Electus EK 24 MT UK & 8116274010 - Arceus/Cure plus/Electus EK 27 MT UK

Product Images

Approval Holder:: Emas Makina Sanayi A.S.

Company Name
Emas Makina Sanayi A.S.
Address
Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa
Postcode
45030
Country
Turkey
General Email
egecakmakci@emas.com.tr

View All Listings by this Company
Manufacturer:: Emas Makina Sanayi A.S.

Company Name
Emas Makina Sanayi A.S.
Address
Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa
Postcode
45030
Country
Turkey
General Email
egecakmakci@emas.com.tr

View All Listings by this Company

WRAS Approval Number: #2205056

Hydraulic block incorporating heat exchangers with pressed stainless-steel plate bodies and copper brazing. Product also incorporates primary and secondary water way with PPS plastic fittings and adaptors and a flow adjustment valve. Maximum operating temperature: Central Heating Circuit: 90°C, Direct Hot Water Circuit: 65°C. Maximum working pressure: Central Heating Circuit: 2.5 bar, Direct Hot Water Circuit: 10 bar.

Section:: 1478 Heater
Section Subtitle:: Combination boilers - accessories and components.
WRAS Approval Number:: 2205056
Size:: DHC: ½” BSP (M) inlet and outlet CH: ¾” BSP (M) inlet and outlet
Marking:: KD One and model on adhesive label, Navien on pump housing.
Installation Requirements:: R001
Expiry date:: 31/05/2027
Model:: NCB500 HYDRAULIC BLOCK RANGE: 30029106 & 30029299

Product Images

Approval Holder:: KD Navien Co Ltd

Company Name
KD Navien Co Ltd
Address
4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea
Phone
+82 2 3489 2200
General Email
www.navien.com

View All Listings by this Company
Manufacturer:: KD Navien Co Ltd

Company Name
KD Navien Co Ltd
Address
4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea
Phone
+82 2 3489 2200
General Email
www.navien.com

View All Listings by this Company

WRAS Approval Number: #2110119

Range of vertical multistage pumps with stainless-steel bodies, stainless-steel impellers, shaft and outer sleeve. Maximum working pressures: T (oval flange): 16.0 bar. V (Victaullic & grooved), C (clamp flanges) & F (round flange) versions: 26.0 bar. Maximum operating temperature 100°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2110119
Size:: NKV1-NKV3 models - F (round flange) versions: DN25. NKV6-NKV20 models - F (round flange) versions: DN32-50. NKV1-NKV20 models - T (oval flange), V (Victaullic - EV; Grooved - VR), C (clamp flanges) & F (round flange) versions: DN32-50.
Marking:: DAB, Company Information,model name, date of production (DD/MM/YYYY), pressure, temperature and other technical information on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2026
Model:: NKV 1, NKV 3, NKV 6, NKV 10, NKV 15 & NKV 20 PUMP RANGES Code example (EV range): NKV 32 / 13 - 2 X Where: NKV = Pump model 20 = Nominal flow rate [m³/h] 13 = No. of stages/impellers 2 = Number and type of turned impeller X = Materials " " = Cast Iron/AISI 304; X = AISI 316

Approval Holder:: DAB PUMPS SPA

Company Name
DAB PUMPS SPA
Address
Via Marco Polo 14 Mestrino (PD)
Postcode
35035
Country
Italy
General Email
certifications@dwtgroup.com

View All Listings by this Company

WRAS Approval Number: #2205046

Range of vertical multistage booster pumps, with stainless steel bodies and impellors. Maximum working pressure is either 16.0 or 25.0 bar depending on specific model. Maximum operating temperature 85°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2205046
Size:: Please refer to model.
Marking:: EBARA, CE, model, temperature and other technical information on data plate.
Installation Requirements:: R001 R415
Expiry date:: 31/05/2027
Model:: EVMS(.) 1 >> Size from 2 to 39 stages EVMS(.) 3 >> Size from 2 to 33 stages EVMS(.) 5 >> Size from 2 to 27 stages EVMS(.) 10 >> Size from 2 to 23 stages EVMS(.) 15 >> Size from 1 to 17 stages EVMS(.) 20 >> Size from 1 to 16 stages EVMS(.) 32 >> Size from 1 to 14 stages EVMS(.) 45 >> Size from 1 to 13 stages EVMS(.) 64 >> Size from 1 to 8 stages EVMS(.) 90 >> Size from 1 to 6 stages ( ) = EVMS >> AISI304 Components (L) = EVMSL >> AISI316L Components (K*) = EVMSK >> AISI304 + PRESSURE SENSOR (LK*) = EVMSLK >> AISI316L + PRESSURE SENSOR *K1 = DANFOSS MBS1900 *K2 = DANFOSS DST P 140 *K3 =SCHNEIDER XMLP0xxBD21F EVMS(.) 1-3 >> Available with Oval flange G1, Round Flange DN25, Loose round flange DN25, Victaulic DN32 and Clamp Ø59 EVMS(.) 5 >> Available with Oval flange G1¼, Round Flange DN32, Loose round flange DN32, Victaulic DN32 and Clamp Ø59. EVMS(.) 10 >> Available with Oval flange G1½, Round Flange DN40, Loose round flange DN40, Victaulic DN50 and Clamp Ø87. EVMS(.) 15-20 >> Available with Oval flange G2, Round Flange DN50, Loose round flange DN50, Victaulic DN50 and Clamp Ø87. EVMS(.) 32 >> Available with Loose round flange DN65. EVMS(.) 45 >> Available with Loose round flange DN80. EVMS(.) 64-90 >> Available with Loose round flange DN100.

Product Images

Approval Holder:: Ebara Pumps Europe S.p.A.

Company Name
Ebara Pumps Europe S.p.A.
Address
Via Campo Sportivo, 30 – 38023 Cles (TN)
Country
Italy
Phone
0039 444 706 811

View All Listings by this Company
Manufacturer:: Ebara Pumps Europe S.p.A.

Company Name
Ebara Pumps Europe S.p.A.
Address
Via Campo Sportivo, 30 – 38023 Cles (TN)
Country
Italy
Phone
0039 444 706 811

View All Listings by this Company

WRAS Approval Number: #2110123

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2110123
Size:: TPX1-TPX3 models - F (round flange) versions: DN25. TPX5-TPX20 models - F (round flange) versions: DN32-50. TPX1-TPX20 models - T (oval flange), V (Victaullic - EV; Grooved - VR), C (clamp flanges) & F (round flange) versions: DN32-50.
Marking:: Dutypoint, date of production (DD/MM/YYYY), pressure, temperature and other technical information on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2026
Model:: TPX1, TPX3, TPX5, TPX10, TPX15 & TPX20 Range of vertical multistage pumps Code example (TPX range): TPX 20 /15 A B C D E F G H J K L M N PMP/A. Where: TPX = Pump model TPX. 20 = Rated flow [m³/h] (varies: 1-20). /15 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round; "T" - oval; "V" - Victaulic; "C" - clamp. C = Materials: "I" - (AISI304/EN1.4301); "N" (AISI316/EN1.4401). D = Motor power (kW x 10). E = Frequency: "5" - 50Hz; "6" - 60Hz. F = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. G = Motor type: "Empty" - without motor, "T" - 3-phase; "M" - 1-phase. H = Mechanical Seal: "Empty" - standard version. J = Type of mechanical Seal: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = "Empty" - standard version, "H" - high pressure. L = "Empty" - standard version, "P" - passivated. M = "Empty" - standard version N = "Empty" - no motor, “IE..” motor efficiency class. PMP/A = cold formed pump casing. Minimum and maximum number of stages (please note the oval flange models have a lower maximum, this is included in brackets as follows [15] to denote 15 stages): TPX1: stage from 2 to 37 [23] (50Hz) and from 2 to 25 [15] (60Hz); TPX3: stage from 2 to 33 [21] (50Hz) and from 2 to 23 [14] (60Hz); TPX5: stage from 2 to 36 [21] (50Hz) and from 2 to 23 [14] (60Hz); TPX10: stage from 2 to 24 [15] (50Hz) and from 2 to 17 [10] (60Hz); TPX15: stage from 1 to 17 [10] (50Hz) and from 1 to 12 [10] (60Hz); TPX20: stage from 1 to 17 [10] (50Hz) and from 1 to 10 [7] (60Hz).

Approval Holder:: Dutypoint Ltd.

Company Name
Dutypoint Ltd.
Address
Unit A, Quedgeley West Business Park, Hardwicke, Gloucester
Postcode
GL2 4PA
Country
United Kingdom
Phone
01452313334
General Email
austin.hill@dutypoint.com

View All Listings by this Company

WRAS Approval Number: #2104076

Range of horizontal self-priming multistage pumps with stainless steel bodies, stainless steel impellers, shaft and outer sleeve. Maximum working pressure 10.0 Bar Maximum operating temperatures: EH Three phase models 85°C, EH Single phase models 55.0°C and EHsp models 35°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2104076
Size:: 1 ¼” BSP (F) – 2” BSP (F)
Marking:: Stuart Turner, model number and other technical info on adhesive label on body.
Installation Requirements:: R001 R415
Expiry date:: 30/04/2026
Model:: HM 0302 230 M 50 HM 0303 230 M 50 HM 0304 230 M 50 HM 0305 230 M 50 HM 0306 230 M 50 HM 0307 230 M 50 HM 0308 230 M 50 HM 0309 230 M 50 HM 0302 230-400 T 50 HM 0303 230-400 T 50 HM 0304 230-400 T 50 HM 0305 230-400 T 50 HM 0306 230-400 T 50 HM 0307 230-400 T 50 HM 0308 230-400 T 50 HM 0309 23 0-400 T 50 HM 0502 230 M 50 HM 0503 230 M 50 HM 0504 230 M 50 HM 0505 230 M 50 HM 0506 230 M 50 HM 0507 230 M 50 HM 0508 230 M 50 HM 0509 230 M 50 HM 0502 230-400 T 50 HM 0503 230-400 T 50 HM 0504 230-400 T 50 HM 0505 230-400 T 50 HM 0506 230-400 T 50 HM 0507 230-400 T 50 HM 0508 230-400 T 50 HM 0509 23 0-400 T 50 HM 0902 230 M 50 HM 0903 230 M 50 HM 0904 230 M 50 HM 0905 230 M 50 HM 0906 230 M 50 HM 0907 230 M 50 HM 0902 230-400 T 50 HM 0903 230-400 T 50 HM 0904 230-400 T 50 HM 0905 230-400 T 50 HM 0906 230-400 T 50 HM 0907 230-400 T 50 HM 0908 23 0-400 T 50 HM 1502 230 M 50 HM 1503 230 M 50 HM 1502 230-400 T 50 HM 1503 230-400 T 50 HM 1504 230-400 T 50 HM 1505 230-400 T 50 HM 1506 230-400 T 50 HM 1507 23 0-400 T 50 HM 2002 230 M 50 HM 2002 230-400 T 50 HM 2003 230-400 T 50 HM 2004 230-400 T 50 HM 2005 230-400 T 50 Type code: HM XY Z L 50 HM: product name X: flow rate Y: number of impellers Z: motor voltage L: motor phase M=single phase; T=three phase 50: frequency

Approval Holder:: Stuart Turner Ltd

Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

WRAS Approval Number: #2206044

‘3ME’ Range of horizontal pumps with stainless steel bodies and impellers, and EPDM ‘O’-rings. The products are supplied with a carbon/ceramic/EPDM shaft seal. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2206044
Size:: SUCTION FLANGE (TO DIN 2532): 32-125/160/200 models: DN50, 40-125/160/200 models: DN65, 50-125/160/200 models: DN65, 65-125/160/200 models: DN80. DISCHARGE FLANGE (TO DIN 2532): 32-125/160/200 models: DN32, 40-125/160/200 models: DN40, 50-125/160/200 models: DN50, 65-125/160/200 models: DN65.
Marking:: Ebara, model, CE and other technical information on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 30/06/2027
Model:: 3ME 32-125/1,1 M (Product code: 1300206600), 3ME 32-160/1,5 M (Product code: 1300206700), 3ME 32-160/2,2 M (Product code: 1300306600), 3ME 40-125/1,5 M (Product code: 1320376600), 3ME 40-125/2,2 M (Product code: 1320276600), 3ME 50-125/2,2 M (Product code: 1330506600), 3ME/I 32-125/1,1 IE3 (Product code: 1300206604I), 3ME/I 32-125/1,1 SCA IE3 (Product code: 1300206504I), 3ME/I 32-125/1,5 SCA IE3 (Product code: 1300206704I), 3ME/I 32-160/1,5 IE3 (Product code: 1300206804I), 3ME/I 32-160/1,5 IE3 SCA (Product code: 1300206904I), 3ME/I 32-160/2,2 IE3 (Product code: 1300306604I), 3ME/I 32-160/2,2 SCA IE3 (Product code: 1300306704I), 3ME/I 32-200/1,1 CARTER IE3 (Product code: 1300206104I), 3ME/I 32-200/1,5 CARTER IE3 (Product code: 1300206114I), 3ME/I 32-200/2,2 CARTER IE3 (Product code: 1300302604I), 3ME/I 32-200/3 IE3 (Product code: 1310406604I), 3ME/I 32-200/3 IE3 SCA (Product code: 1310409604I), 3ME/I 32-200/4 CARTER IE3 (Product code: 1310558704I), 3ME/I 32-200/4 IE3 (Product code: 1310556604I), 3ME/I 32-200/4 SCA (Product code: 1310556704I), 3ME/I 32-200/5,5 IE3 (Product code: 1310756606I), 3ME/I 32-200/5,5 SCA IE3 (Product code: 1310756706I), 3ME/I 32-200/7.5 IE3 (Product code: 1310906604I), 3ME/I 32-200/7.5 IE3 SCA (Product code: 1310906704I), 3ME/I 40-125/1,5 IE3 (Product code: 1320376604I), 3ME/I 40-125/1,5 SCA IE3 (Product code: 1320376704I), 3ME/I 40-125/2,2 IE3 (Product code: 1320276604I), 3ME/I 40-125/2,2 SCA IE3 (Product code: 1320276704I), 3ME/I 40-160/3 IE3 (Product code: 1320406604I), 3ME/I 40-160/3 SCA IE3 (Product code: 1320406704I), 3ME/I 40-160/4 IE3 (Product code: 1320556604I), 3ME/I 40-160/4 SCA IE3 (Product code: 1320556704I), 3ME/I 40-200/11 IE3 EN (Product code: 1330916606I), 3ME/I 40-200/11 SCA IE3 (Product code: 1330916706I), 3ME/I 40-200/3 CARTER IE3 (Product code: 1320402704I), 3ME/I 40-200/4 CARTER IE3 (Product code: 1320556504I), 3ME/I 40-200/5,5 IE3 EN (Product code: 1330756604I), 3ME/I 40-200/5,5 SCA IE3 (Product code: 1330756904I), 3ME/I 40-200/7,5 IE3 (Product code: 1330906604I), 3ME/I 40-200/7,5 SCA IE3 (Product code: 1330906704I), 3ME/I 50-125/2,2 IE3 (Product code: 1330506604I), 3ME/I 50-125/2,2 SCA IE3 (Product code: 1330506704I), ME/I 50-125/3 (126) (Product code: 6130002990:), 3ME/I 50-125/3 IE3 (Product code: 1330556604I), 3ME/I 50-125/3 SCA IE3(Product code: 1330556704I), 3ME/I 50-125/3R (D126) (Product code: 1330556404I), 3ME/I 50-125/4 IE3 (Product code: 1330406604I), 3ME/I 50-125/4 SCA IE3 (Product code: 1330406704I), 3ME/I 50-160/5,5 230/400_50 IE3 (Product code: 1330902504I), 3ME/I 50-160/5,5 IE3 EN (Product code: 1330906606I), 3ME/I 50-160/5,5 SCA IE3 (Product code: 1330906706I), 3ME/I 50-160/7,5 IE3 (Product code: 1330896606I), 3ME/I 50-160/7,5 R154 IE3 (Product code: 1330896806I), 3ME/I 50-160/7,5 SCA IE3 (Product code: 1330896706I), 3ME/I 50-200/11 IE3 (Product code: 1330966606I), 3ME/I 50-200/11 IE3 STAC (Product code: 1330964006I), 3ME/I 50-200/11 SCA IE3 (Product code: 1330966706I), 3ME/I 50-200/116 380-460/660SCA (Product code: 1330966716I), 3ME/I 50-200/15 IE3 (Product code: 1330986606I), 3ME/I 50-200/15 SCA IE3 (Product code: 1330986706I), 3ME/I 50-200/5,5 CARTER IE3 (Product code: 1330906106I), 3ME/I 50-200/7,5 CARTER IE3 (Product code: 1330890206I), 3ME/I 50-200/9,2 IE3 (Product code: 1330976606I), 3ME/I 50-200/9,2 SCA IE3 (Product code: 1330976706I), 3ME/I 65-125/4 IE3 (Product code: 1344126604I), 3ME/I 65-125/4 SCA IE3 (Product code: 1344126804I), 3ME/I 65-125/5,5 IE3 (Product code: 1344136604I), 3ME/I 65-125/5,5 SCA IE3 (Product code: 1344136704I), 3ME/I 65-125/5.5R (D128) (Product code: 1344136404I), 3ME/I 65-125/7,5 230/400_50 IE3 (Product code: 1344146606I), 3ME/I 65-125/7,5 IE3 (Product code: 1344146604I), 3ME/I 65-125/7,5 SCA IE3 (Product code: 1344146804I), 3ME/I 65-125/7.5R (D138) (Product code: 1344146404I), 3ME/I 65-160/11 IE3 (Product code: 1345166604I), 3ME/I 65-160/11 SCA (Product code: 1345166704I), 3ME/I 65-160/15 IE3 (Product code: 1345176604I), 3ME/I 65-160/15 IE3 (Product code: 1345176704I), 3ME/I 65-160/7,5 IE3 (Product code: 1345146604I), 3ME/I 65-160/7,5 SCA IE3 (Product code: 1345146704I), 3ME/I 65-160/9,2 IE3 (Product code: 1345156604I), 3ME/I 65-160/9,2 SCA IE3 (Product code: 1345156704I), 3ME/I 65-200/15 IE3 (Product code: 1346176604I), 3ME/I 65-200/15 SCA IE3 (Product code: 1346176704I), 3ME/I 65-200/18,5 IE3 (Product code: 1346186604I), 3ME/I 65-200/18,5 IE3 SCA (Product code: 1346186704I), 3ME/I 65-200/22 IE3 (Product code: 1346196604I), 3ME/I 65-200/22 IE3 STAC (Product code: 1346193904I), 3ME/I 65-200/22 SCA IE3 (Product code: 1346196704I).

Product Images

Approval Holder:: Ebara Pumps Europe S.p.A.

Company Name
Ebara Pumps Europe S.p.A.
Address
Via Campo Sportivo, 30 – 38023 Cles (TN)
Country
Italy
Phone
0039 444 706 811

View All Listings by this Company
Manufacturer:: Ebara Pumps Europe S.p.A.

Company Name
Ebara Pumps Europe S.p.A.
Address
Via Campo Sportivo, 30 – 38023 Cles (TN)
Country
Italy
Phone
0039 444 706 811

View All Listings by this Company

WRAS Approval Number: #2205010

Range of shower outlets with plastic bodies (various finishes) incorporating a stainless-steel strainer and a flow regulator. Maximum operating temperature 60°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2205010
Size:: ½” BSP (F)
Marking:: Hansgrohe on shower face
Installation Requirements:: R001 R040
Expiry date:: 31/05/2027
Model:: 26 093 xxx Hansgrohe Vernis Blend Overhead shower 200 1jet Green 26 094 xxx Hansgrohe Vernis Shape Overhead shower 230 1jet Green 26 095 xxx Hansgrohe Vernis Blend Overhead shower 200 1jet LowPressure 26 096 xxx Hansgrohe Vernis Shape Overhead shower 200 1jet LowPressure 26 271 xxx Hansgrohe Vernis Blend Overhead shower 200 1jet 26 277 xxx Hansgrohe Vernis Blend Overhead shower 200 1jet EcoSmart 26 281 xxx Hansgrohe Vernis Shape Overhead shower 230 1jet 26 283 xxx Hansgrohe Vernis Shape Overhead shower 230 1jet EcoSmart Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #2205015

Range of showers handsets incorporating plastic bodies (chrome plated) Maximum operating temperature 60°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2205015
Note:: Open outlet use only
Size:: ½” BSP (M)
Marking:: Solex and WRAS on handle.
Installation Requirements:: R001 R040
Expiry date:: 31/05/2027
Model:: P51700 P71500 P71501 P74500 P76300

Product Images

Approval Holder:: Xiamen Solex High-Tech Industries Co., Ltd.

Company Name
Xiamen Solex High-Tech Industries Co., Ltd.
Address
No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022
Country
China
General Email
brian_lin@mysolex.com

View All Listings by this Company
Manufacturer:: Xiamen Solex High-Tech Industries Co., Ltd.

Company Name
Xiamen Solex High-Tech Industries Co., Ltd.
Address
No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022
Country
China
General Email
brian_lin@mysolex.com

View All Listings by this Company