‘TECHNYL ® SAFE A 219WFC V50 BK’. Black coloured, injection moulded, glass reinforced PA66 material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240355033

Expiry date:

31/03/2029

Approval Holder:

POLYTECHNYL S.A.S. Member of DOMO Chemicals

Company Name

POLYTECHNYL S.A.S. Member of DOMO Chemicals

Address

Usine de Belle Etoile, Avenue Albert Ramboz, 69190 SAINT-FONS

Country

France

View All Listings by this Company

'Icorene 1440 NAT & Icorene 1440 BLK 9001'. Natural (appears off-white) & black, rotationally moulded polyethylene materials. For use with water up to 23°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240355007

Expiry date:

31/03/2029

Approval Holder:

Schulman Gainsborough Ltd. (A Lyondell Basell Company)

Company Name

Schulman Gainsborough Ltd. (A Lyondell Basell Company)

Address

Sandars Road, Heapham Road Industrial Estate, Gainsborough, Lincs.

Postcode

DN21 1RZ

View All Listings by this Company

'NORYL FE1410PW - 801' (appears yellow-cream coloured) & 'NORYL FE1410PW - 960' (light-grey coloured). Injection moulded PPE & PS materials. For use with water up to 85°C.

Section:

5253 Polyphenylene Ether (PPE)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2211570

Expiry date:

30/11/2027

Approval Holder:

SHPP B.V.

Company Name

SHPP B.V.

Address

Plasticslaan 1, 4612PX, Bergen Op Zoom

Country

Netherlands

View All Listings by this Company

XYRON™ WG725 AWY2139 (off-white). XYRON™ WG725 AWY6633 (beige). XYRON™ WG725 AWY3328 (black) XYRON™ WG735 AWY3327 (black) XYRON™ WG735 AWY2138 (grey). XYRON™ WG735 AWY2272 (grey) XYRON™ WG735 AWY6632 (beige). Injection moulded, Modified Polyphenylene Ether materials. For use with water up to 85°C.

Section:

5253 Polyphenylene Ether (PPE)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240355018

Expiry date:

31/03/2029

Approval Holder:

Asahi Kasei Corporation

Company Name

Asahi Kasei Corporation

Address

Hibiya Mitsui Tower, 1‐1‐2 Yurakucho, Chiyoda‐ku, Tokyo, 100‐0006

Country

Japan

View All Listings by this Company

'TCM CPRO'. Site applied, two-part (supplied with internal mixing nozzle so no manual mixing required), brown coloured chemical anchor resin. Apply as per manufacturer's instructions dated 02.03.2019. Cure for 4 days@5°C. For use with water up to 23°C. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5311 Resin Anchors

Expiry date:

30/11/2028

Approval Holder:

Trutek Fasteners Polska Sp. z.o.o.

Company Name

Trutek Fasteners Polska Sp. z.o.o.

Address

ul. Wojska Polskiego 3, 39-300 Mielec

Country

Poland

View All Listings by this Company