Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250602015

Range of wall mounted self-closing thermostatic shower valves with brass bodies, with a chrome plated dome type operating member. Models are also supplied with a chrome plated shower head with a plastic aerator. Both inlets incorporate stainless steel strainers and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 250602015
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models:
Marking:: 790BOX - Delabie on case cover 790218 – Delabie on button and shower head 790219 – Delabie on button and shower head
Installation Requirements:: R001 R040
Expiry date:: 30/06/2030
Model:: 790BOX – ½” BSP (M) X 3/4" BSP (F) 790218 – ¾” BSP (M) 790219 – ¾” BSP (M)

Manufacturer:: Delabie SAS

Company Name
Delabie SAS
Address
1-3 Henderson house Hithercroft Road Wallingford Oxfordshire
Postcode
OX10 9DG
Country
United Kingdom

View All Listings by this Company

WRAS Approval Number: #250602040

Range of concealed thermostatic shower valves, (brass bodies – various finishes) incorporating a quarter turn ceramic disc headwork controlling the flow to the shower outlets. Model VQ15 and VQ16 incorporates a manual diverter to the outlets. Model VQ20 incorporates a single shower outlet and model VQ21 incorporates a double shower outlet. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate approved single check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 250602040
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (F) or ¾” BSP (F) inlets and outlets.
Marking:: Model number on body
Installation Requirements:: R001 R040
Expiry date:: 30/06/2030
Model:: VQ15 VQ16 VQ20 VQ21

Manufacturer:: Ultra Finishing Ltd.

Company Name
Ultra Finishing Ltd.
Address
Raikes Lane Ind Est. Lancashire, BL3 2NH
Phone
01282 436934

View All Listings by this Company

WRAS Approval Number: #250404711

Range of normally closed (NC), solenoid valves with plastic bodies and EPDM diaphragm. Models with push-fit connections are for use with copper pipe (manufactured to EN 1057) and PTFE pipe. The products incorporate a plastic or stainless steel filter on the inlet, (except for models with swivel nut, push-fit and nozzle inlets, as well as the 44.007.126 and 01.021.126 models) . The 44.007.126 model incorporates a Y-pattern stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperatures: Cold water use only, 65°C or 90°C for models marked with ℗ - Please consult model section for further details.

Section:: 2240 Valves
Section Subtitle:: Solenoid, plastic.
WRAS Approval Number:: 250404711
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: AuK Muller, type (model), voltage, maximum water temperature (Tm 23°C, 65°C or 90°C as appropriate), date of manufacture WW/YY on adhesive label on coil. AuK Muller logo, flow arrow, pressure rating and model moulded on body. Models suitable for 90°C are also marked with a ℗ on the base of the body.
Installation Requirements:: R001 R008
Expiry date:: 30/04/2030
Model:: Cold water use only models: 01.007.115: Inlet: G 3/8” (M), 01.021.126: Inlet: G 1” (M). 65°C models: 01.007.111: Inlet: G 1/2” (M); G 3/8”(M); G 3/4” (M), 01.007.115: Inlet: G 3/4” (M), 01.007.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Push-Fit; Ø 8 Push-Fit, 44.007.126: Inlet: G 1/2” (M); G 3/4” (M), 29.007.215: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M), 01.010.115: Inlet: G 3/4" (M), 01.010.125: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Nozzle; 3/8” Push-Fit; G 3/4” (F) ; 3/4-11,5 NH (F); G 1/2” (F), 01.010.215: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.216: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.315: Inlet: G 3/4” (M), 01.010.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.415: Inlet: G 3/4” (M), 01.010.425: Inlet: G 3/4” (M), 29.010.226: Inlet: G 3/4” (M), 29.010.326: Inlet: G 3/4” (M), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); 3/4-11,5 NH (M), 01.013.215: Inlet: G 3/4” (M), 01.013.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.017.126: Inlet: G 3/4” (M, 15.017.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 15.017.425: Inlet: G 3/4” (M); 3/4-11,5 NH (M). 90°C models (marked with a ℗): 01.010.115: Inlet: G 1/2” (M); G 3/4 (M), 01.010.125: Inlet: G 3/4” (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F); G 1/2” (F), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F), 01.017.115: Inlet: G 3/4” (M), 01.017.126: Inlet: G 3/4” (M); 3/4-11,5 NH (M).

Approval Holder:: A.u.K. Müller GmbH & Co. KG

Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company
Manufacturer:: A.u.K. Müller GmbH & Co. KG

Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

WRAS Approval Number: #250608014

Range of spherical valves with DZR brass bodies (chromium plated), chromium plated brass balls, PTFE seat and single lever operating members. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 250608014
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: Conex, size and PN on the body and Conex on lever.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: 126013RRR250404 ½” BSP (F), 126013RRR250606 ¾” BSP (F), 126013RRR250808 1” BSP (F), 126013RRR251010 1 1/4” BSP (F), 126013RRR251212 1 ½” BSP (F), 126013RRR251616 2” BSP (F).

Approval Holder:: Conex Universal Limited

Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company

WRAS Approval Number: #250655010

'FH821Z2'. Dark grey coloured, pressed & carbonised, resin impregnated carbon bearing. For use with water up to 85°C.

Section:: 5022 Carbon
Expiry date:: 30/06/2030

Approval Holder:: Schunk Kohlenstofftechnik GmbH

Company Name
Schunk Kohlenstofftechnik GmbH
Address
Rodmeiher Strasse 59, 35452 Heuchelheim
Country
Germany

View All Listings by this Company