Range of brass caplillary fittings for use with EN1057 copper tube. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011363

Size:

See model.

Marking:

Flomasta and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

EPH_WSP19_1646 15mm x G1/2” Elbow. EPH_WSP19_2610 15mm x G1/2” Elbow. EPH_WSP19_2611 15mm x G1/2” Elbow. EPH_WSP19_1642 15mm x R1/2” Straight. EPH_WSP19_1645 15mm x G1/2” Straight. EPH_WSP19_1643 22mm x G3/4” Straight.

Approval Holder:

Kingfisher PLC

Company Name

Kingfisher PLC

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of brass compression fittings for use with copper pipe to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011314

Size:

½”, ¾” or 1” compression

Marking:

HM Pro on body. Heatmerchants Pro, size and technical information on nut.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

U47171, U47172, U47174, U47173, U47175, U47176, U47177, U47179, U47178, U47180, U47181, U47182, U47185, U47183, U47184, U47186, U47187, U47188, U47189, U47190, U47191, U47192, U47193, U47194, U47195, U47197, U47196, U47198, U47199, U47200, U47205, U47204, U47201, U47202, U47203, U47211, U47206, U47208, U47209, U47207, U47210, U47212, U47214, U47218, U47219, U47220, U47221, U47222, U47223

Product Images

Approval Holder:

Heat Merchants Group.

Company Name

Heat Merchants Group.

Postcode

CO WESTMEATH

View All Listings by this Company

Range of end feed copper fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011038

Size:

Please refer to model.

Marking:

◊ A ◊ (Masterflow logo) and 'SIZE' on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

Masterflow soldered endfeed: Straight Coupler 8mm to 54mm. Reduced Coupler 8mm to 54mm. Fitting Reducer 8mm to 54mm. Fitting Reduce (Long) 8mm to 15mm. Imperial/Metric Coupler 1/2”x15mm.3/4”x22mm.1”x28mm. Slip Coupler 15mm to 28mm. C x Fl Straight Coupler 15mm x 1/2”,15mm x 3/4”,22mm x 3/4”, 28mm x 1”,35mm x 1.1/4”,42mm x 1.1/2”,54mm x 2”. Cx Ml Straight Coupler 15mm x 1/4”,15mm x 1/2”,22mm x 1/2”, 22mm x 3/4”,28mm x 1”,35mm x 1.1/4”,42mm x 1.1/2”,54mm x 2”. C x Fl 15mm x 1/2”,22mm x 3/4.” C x Ml Elbow 15mm x 1/2”,22mm x 3/4”. 90 deg Elbow 8mm to 54mm. 90 deg Street Elbow 10mm to 54mm. Obtuse Street Elbow 15mm to 54mm. End Feed Long Radius Street Elbow 15mm x 54mm. 45 deg Obtuse Elbow 15mm to 54mm. Wallplate Elbow 15mm x 1/2”. Part Crossover 15mm to 22mm. Full Crossover 15mm to 22mm. Equal Tee 10mm to 54mm. Reduced Branch Tee 10mm to 54mm. Reduced End Tee 15mm to 54mm. Reduced End & Branch Tee 15mm to 54mm. Both Ends Reduced Tee 15mm x 28mm. Extended Street Elbow 15mm x 150mm. Fl Tee (Fl On Run) 15mm x 1/2” x 15mm, 22mm x 1/2” x 22mm. Fl Tee (On Run) 15 x 15 x 1/2”,22 x22 x 1/2”,22 x 22 x 3/4”. Stop End 8mm to 54mm. Straight Tap Connector 15mm x 1/2”,15mm x 3/4”, 22mm x 3/4”. Bent Cap Connector 15mm x 1/2”,15mm x 3/4”,22mm x 3/4”. Bent Union Adaptor 22mm x 1”. Straight Union Adaptor 22mm x 3/4”,22mm x 1”,28mm x 1”. Air Vent Cap 15mm and 22mm. U Bend 15mm.

Product Images

Approval Holder:

Masterflow UK

Company Name

Masterflow UK

Address

Astley Park Estate, The Gatehouse, Kennedy Road, Astley, Manchester

Postcode

M29 7JY

View All Listings by this Company

Range of dual flush, WC outlet valves. Each valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Maximum operating temperature – Cold water use.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2011046

Note:

Not supplied with an operating button

Size:

62 ∅

Marking:

WDI, ECO and series on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

K4050-G-YYB1, K4050-G-YYB2, K4050-G-YYB3 & K4050-G-YYB4.

Product Images

Approval Holder:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Manufacturer:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Uponor Combi Port range of indirect heat interface units providing heating and instantaneous hot water. The heating system incorporates an expansion vessel and pressure relief valve (set at 3.0 bar).Some units have optional ball valve sets. Primary side heating 85°C and 2.5 bar. Secondary side, space heating 60°C and 2.5 bar. Secondary side DHW 60°C and 4.0 bar.

Section:

1350 Heat Exchangers

Size:

See model

Marking:

Uponor, model no, serial no & date of manufacture (DD.MM.YYYY) on inside cover.

Installation Requirements:

R001 R140 R360

Expiry date:

31/10/2025

Model:

Uponor Combi Port base XU: 1095642 15l/min 1095643 21l/min 1095644 29l/min Optional ball valve set 101802 for models 1095644 & 1095642 Uponor Combi Port PRO XU: 1095636 15l.min 1095637 21l/min Optional Ball valve set 1037536

Product Images

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company