Directory Search Results

Print List

#2112369

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112369
Size:
½” BSP (M)
Marking:
Ideal Standard, actuation method, product date (DD/MM/YYYY) & Ideal Standard on flush plate 6L waterline on casing within cistern
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
R014267 Prosys 150 WC cistern Mech CL2 6L R042867 Prosys 150 WC cistern 820mm high Mech CL2 6L R031667 Prosys 150 WC cistern Pneu CL2 6L R042967 Prosys 150 WC cistern 820mm high Pneu CL2 6L R014267 Prosys 150 WC cistern Mech CL2 6L R042867 Prosys 150 WC cistern 820mm high Mech CL2 6L

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2109071

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2109071
Size:
15mm Compression Model added April 2022: ½” BSP (M)
Marking:
Smart Line nk Porcelanosa Fluidmaster, model and flushing volumes inside of cistern.
Installation Requirements:
R001 R556
Expiry date:
30/09/2026
Model:
100294198 100294217

Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
CV-20 Km2 VILA-REAL CASTELLON
Postcode
12540
Country
Spain
General Email
certificaciones@noken.com

View All Listings by this Company

Print This Approval


#2212365

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212365
Size:
½” BSP (M).
Marking:
Crosswater X logo on flush plate. Model & 6L waterline printed within cistern.
Installation Requirements:
R001 R556
Expiry date:
31/12/2027
Model:
WCF114X51R & WCF114X50R WC

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#240588006

Single hole, single outlet (fixed), over the rim (swivel nozzle) bidet combination tap assembly (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a lever operated pop-up waste (not verified by test). Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
240588006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Villeroy & Boch on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2029
Model:
TVB105201110xx with pop up waste Where xx denotes the surface finish and can be replaced with: 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite.
Product Images

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#240588007

Range of single hole, single outlet (fixed), over the rim (swivel nozzle) bidet combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. The product is supplied with a lever operated pop-up waste (not verified by test). Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
240588007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Villeroy & Boch on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2029
Model:
TVB104201110xx, TVB125001000xx, TVB103001000xx. Where xx denotes the surface finish and can be replaced with: 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite.
Product Images

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#240502053

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The products incorporate a pull-out spout with a plastic aerator. Both models incorporate an approved check valve cartridge within the quick connector to the pull-out hose, and the inlet to the pull-out spout of the 63036-01X model incorporates an approved check valve cartridge with a plastic flow regulator, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
240502053
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R007 applies to the connecting hose between the tap body and the pull-out hose.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Lota on front of body
Installation Requirements:
R001 R007 R009 R090
Expiry date:
31/05/2029
Model:
63036-01X, 63694-00X. Where X denotes the finish and can be replaced by any of the following: 0107 = Chrome, 04 = Brushed Nickel, 4408 = Brushed Brass, 7001 = Matt Black, 4403 = Brushed Brass (Light), 0402 = Brushed Nickel, 5804 = Gun Metal, 0408 = Brushed Stainless Steel.
Product Images

Approval Holder:
Xiamen lota international co. ltd
Company Name
Xiamen lota international co. ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company
Manufacturer:
Xiamen lota international co. ltd
Company Name
Xiamen lota international co. ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company

Print This Approval


#2309378

Single-hole, single outlet, (swivel), combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull-out spray type that incorporates a plastic aerator. The inlet of the cold supply hose and the pull-out spray handset both incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2309378
Size:
Cold inlet: Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (M) end connection. Hot inlet: Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connection.
Marking:
Leisure on operating member.
Installation Requirements:
R001 R090
Expiry date:
30/09/2028
Model:
Aquaflex

Approval Holder:
AGA Rangemaster Ltd
Company Name
AGA Rangemaster Ltd
Address
Meadow Lane, Long Eaton, Nottingham
Postcode
NG10 2GD
Phone
+44 (0) 115 946 4000
General Email
info@agarangemaster.co.uk

View All Listings by this Company

Print This Approval


#240588004

Range of single hole, single outlet fixed combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240588004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections
Marking:
Crosswater 'X' logo on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2029
Model:
PI110DNx Where x denotes finish and can be replaced by: C = Chrome, V = Stainless steel effect, F = Brushed brass, M = Matt Black, A = Anthracite, W = White, B = Brushed Black Chrome, N = Polished Nickel, L = Brushed Nickel, Q = Unlacquered Brass, RG = Rose Gold, BGR = Brushed Rose Gold, P = Copper, BP = Brushed Copper, AP = Antique Copper, S = stainless Steel, SF = Stainless Steel Brass Effect, SM = Black Stainless Steel, G = gunmetal, UB = unlacquered brushed brass, Z = Bronze, AZ = Antique Bronze, BZ - Brushed Bronze, GR = Graphite, G = Gold, T = Slate.

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#2210382

Single hole, single outlet (fixed) combination tap assemblies various finishes incorporating a ceramic cartridge headwork with various operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2210382
Size:
Stainless steel braided, PEX lined flexible hose assembly incorporating ½” BSP (F) captive nut.
Marking:
Sonas on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2027
Model:
UBR0154 Models added Sept 2024: UBR0155, UBR0157 UBR0156

Approval Holder:
Sonas Bathrooms
Company Name
Sonas Bathrooms
Address
103 Northwest Business Park Ballycoolin, Dublin 15
Postcode
D15 R88
Country
Ireland

View All Listings by this Company

Print This Approval


#240603002

Range of single-hole, single outlet, fixed combination tap assemblies, (chrome plated brass bodies), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240603002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless-steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections.
Marking:
BRISTAN on the body
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2029
Model:
NAX BAS C RP3 NAX BAS C
Product Images

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 553 of 854

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.