Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2312392

Range of non-rising spindle gate valves with bronze, brass or DZR brass (V2143R) bodies, incorporating hand wheel or key operated operating members. Maximum working pressure 16.0 Bar (V2143R) 25.0 bar

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 2290 Valves
Section Subtitle:: Stop, gate, metal.
WRAS Approval Number:: 2312392
Size:: See models.
Marking:: Tecofi, CR (V2143R-DZR only) DN and PN on body
Installation Requirements:: R001
Expiry date:: 31/12/2028
Model:: Bronze Bodied Gate Valves: V2143R (Hand Wheel) Size: ½” - 2” BSP (F), NPT (F) or BSPP (F). V2142A (Hand Wheel) Size: ½” - 2” BSP (F), NPT (F) or BSPP (F). V2144R (Key Operated) Size: ½” - 2” BSP (F), NPT (F) or BSPP (F). Brass Bodied Gate Valves: V1142R (Hand Wheel) Size: ½” - 2” BSP (F), NPT (F) or BSPP (F). V1144R (Key Operated) Size: ½” - 2” BSP (F), NPT (F) or BSPP (F). V2143R-DZR (Hand Wheel & DZR brass) Size: ½” - 2” BSP (F), NPT (F) or BSPP (F).

Approval Holder:: TECOFI

Company Name
TECOFI
Address
2 Rue Barthélemy Thimonier ZAC Everest Lyon
Postcode
69740
Country
France
General Email
j.ortega@tecofi.fr

View All Listings by this Company

WRAS Approval Number: #250102046

Range rising spindle screw down stop valves with gunmetal bodies and T-type operating members. Models SCM020000535, SCM025000536, SCI100000533, SCM025002164 & SCM032002165 models are to be used with PE80 pipe manufactured to EN 12201. Maximum working pressure: 12.5 Bar. Maximum operating temperature: 23°C.

Section:: 2310 Valves
Section Subtitle:: Stop, metal, screw down.
WRAS Approval Number:: 250102046
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models below.
Marking:: Waterfit logo (WF), size and flow arrow on body
Installation Requirements:: R001
Expiry date:: 31/01/2030
Model:: SCI050000474 – 1/2" BSP (F), SCI075000489 – 3/4" BSP (F), SCI100000458 - 1" BSP (F), SCI150000464 – 11/2" BSP (F), SCI200000482 – 2" BSP (F), SCM020000535 / 41020 – 20mm Compression, SCM025000536 / 41025 - 25mm Compression, SCI100000533 / 41032 - 32mm Compression, SCM025002164 - 25mm pushfit, SCM032002165 - 32mm pushfit.

Manufacturer:: Waterfit Ltd

Company Name
Waterfit Ltd
Address
PO Box 28 293 Birmingham New Road Dudley
Postcode
DY1 4SJ
Country
West Midlands
Phone
0121 5207987

View All Listings by this Company

WRAS Approval Number: #250508001

Range of double regulating valves with bronze bodies, DZR brass discs, EPDM `O`-rings and PTFE disc face. The valves incorporate a non-rising spindle headwork regulating the flow and isolation function. The D931, D933 and D934 models incorporate two pressure test points. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:: 2348 Valves
Section Subtitle:: Balancing.
WRAS Approval Number:: 250508001
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: D921: ½” - 2” BSP (F x F), D921.AT: ½” - 2” NPT (F x F), D923 (Low flow): ½” BSP (F x F), D923.AT (Low flow): ½” NPT (F x F), D931: ½” - 2” BSP (F x F), D931.AT: ½” - 2” NPT (F x F), D933 (Low flow): ½” BSP (F x F), D933.AT (Low flow): ½” NPT (F x F), D934 (Ultra low flow): ½” BSP (F x F), D934.AT (Ultra low flow): ½” NPT (F x F).
Marking:: Crane, size, PN and flow arrow on body. Crane and model no. on handwheel.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: D921, D921.AT, D923 (Low flow), D923.AT (Low flow), D931, D931.AT, D933 (Low flow), D933.AT (Low flow), D934 (Ultra low flow), D934.AT (Ultra low flow).

Approval Holder:: Crane Ltd

Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Country
United Kingdom
Phone
01473 277 364
General Email
tturner@cranebsu.com

View All Listings by this Company

WRAS Approval Number: #250102705

Water chiller and heater units for under counter installation incorporating an approved double check valve at the inlet, to be used in conjunction with an outlet tap arrangement or flow control device, with a range of taps that are supplied with the chillers. Maximum working pressure 10.0 Bar Maximum operating temperature 98.0°C

Section:: 2420 Water Cooler(s) for drinking water
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M)
Marking:: Billi on tap body. Billi on front of unit. Technical information on adhesive label on back of unit
Installation Requirements:: R001 R006
Expiry date:: 31/01/2030
Model:: Alpine Family, Cold and Ambient Water units 932060, 932120, 932125, 913000 Quadra Family 904010, 904020, 904025, 904040, 904060, 904065, 904100, 904105, 904107, 904180, 904187 X-series taps (XL- levered dispenser, XT -touch dispenser, XR-remote dispenser) XL ( 852150), XT ( 852153), XR (852156) Mixer Taps 991200, 991300, 991400, 991500, 991600, 991700, 991900 Models Added August 2025: Sahara family. Hot Water units 943020, 943025, 943065, 943060, 943120 & 943125 XL Tap font with 70mm riser. 992800 XL Tap font with 120mm riser. 992803 Slimline tap font 992810

Manufacturer:: Billi Australia Proprietary Ltd

Company Name
Billi Australia Proprietary Ltd
Address
Unit 1, 21-35 Radford Road Reservoir, Victoria 3073
Country
Australia

View All Listings by this Company

WRAS Approval Number: #250355071

'ANUBIT HB-1000'. Factory applied, black coloured bitumen coating. Apply as per manufacturer's TDS 'AE-TDS-023-2021', dated '02.08.2024'. Please note that use of a thinner isn't covered by the scope of this approval. Cure for 40 minutes@30°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 250355071
Expiry date:: 31/03/2030

Approval Holder:: Anupam Enterprises

Company Name
Anupam Enterprises
Address
113, Park Street 5th Floor, Block-B, Kolkata, 700 016, West Bengal
Country
India

View All Listings by this Company