Two-hole, single outlet (fixed) combination tap assembly (chrome plated brass body) incorporating a two-way diverter headwork that controls the flow between the spout outlet and shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic mixing cartridge, the incorporates a manual override button. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts, shower hose, handset and flow regulator. Maximum working pressure 5 bar. Maximum operating temperature 65°C

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

250788010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M)

Marking:

Tap body - Aqualisa Shower Hose - Aqualisa Shower Handset - Aqualisa

Installation Requirements:

R001 R006 R020

Expiry date:

31/07/2030

Model:

300BSM.ECO

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Section:

0530 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

Wall Mounted Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R030

Expiry date:

31/08/2030

Product Images

Approval Holder:

ZHEJIANG XINDONG SANITARY WARE CO., LTD

Company Name

ZHEJIANG XINDONG SANITARY WARE CO., LTD

Address

Xuanmen Industrial Zone Yuhuan Zhejiang

Postcode

317608

Country

China

General Email

310860331@qq.com

View All Listings by this Company

Manufacturers:

Zhejiang Xindong Sanitary Ware Co., Ltd

Range of three-hole, single outlet, combination tap assemblies (brass bodies - various finishes). Incorporating a ceramic cartridge headwork with various operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up or lever type waste – not verified by test. Maximum working pressure. 6.0 bar. Maximum operating temperature 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250902013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

WATERWORKS on escutcheon or end of spout.

Installation Requirements:

R001 R006 R008 R010

Expiry date:

30/09/2030

Model:

BLS2ZZX BLS6ZZX CLS2ZZX HLS2ZZX Followed by the legend of the type of lever/handle and surface finish. Suffix options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle with Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Range of combination valves with bronze bodies, incorporating a spherical valve with a brass ball on the inlet, two pressure gauges either side of a pressure reducing valve and a water meter manifold. The pressure reducing valve has an outlet pressure range between 1.5 and 6.0 bar. The outlet incorporates two check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). The outlet of the Easy Flow Pro model also incorporates a spherical valve with a brass ball and a combined drain valve, above ground use only. Maximum inlet supply pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1510 Water Meter Manifolds

WRAS Approval Number:

250602703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

R511 does not apply to the Easy Flow model.

Size:

1” BSP (F) inlet/outlet with 1” BSP (M) x ¾” BSP (F) reducing bushes.

Marking:

Albion logo, size, pressure, flow arrow and WRAS on body. Albion logo on handle. Easy flow pro on water meter cap.

Installation Requirements:

R001 R511

Expiry date:

30/06/2030

Model:

Easy Flow, Easy Flow Pro.

Approval Holder:

Albion Valves (UK) Limited

Company Name

Albion Valves (UK) Limited

Address

9a Fallbank Industrial Estate Dodworth Barnsley

Postcode

S75 3LS

Country

United Kingdom

Phone

01226 729900

General Email

samjed@albionvalvesuk.com

View All Listings by this Company

Range of multistage centrifugal pumps with stainless steel impellers, intermediate chambers, shaft and outer sleeve. The DPV(M/S) models and DPV(S) models can also incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressures: Existing models: DPV models 10.0 bar, DPVM models with an oval flange or VME models with integral check valve 16.0 bar, All other DPVM models 25.0 bar. DPV(S) models with an oval flange or DPV(S)(E) models with integral check valve 16.0 bar, All other DPV(S) models and DPH(S)I models 25.0 bar. Maximum operating temperatures: DPHM, DPVE and DPVME models with integral check valve 60°C, all other model variants 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250302723

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DPHM 2/4/6 B: 1¼” BSP (F) inlet x 1” BSP (F) outlet. DPV(M/S)(F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. DPV(S) (F/E/V/T) 10 B/15 B/15 C: Oval flange: DN40, DN50. Round flange: DN40, DN50. External threaded: 1½” BSP (M), Victaulic: DN50 and Tri-clamp: DN50. DPV(S)F 25/40/60/85/125 B: Round flange: DN65, DN80, DN100, DN125. DPH(S)I 2/4/6 B: 1¼” BSP or NPT (F). DPH(S)I 10/15 B/C: 2” BSP or NPT (F).

Marking:

DPVF & logo, model name, PN, WRAS and technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

DPHM x yy B. Where: x = flow rate m³/h (2, 4 or 6). yy = no. of stages ranges 1-6 stages. ------------------------------------- DPV(M/S)(F/E/V/T) x yy B/C Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. No indication (V/VS only) = oval flange. F (VF/VSF) = round flange. E (VE) = external thread. V (VV/VSV) = Victaulic. T (VT/VST) = Triclamp. x = flow rate m³/h (2, 4, 6, 10, 15). yy = no. of stages DPV(M/S)(F/E/V/T)……2 B 1-30 stages. DPV(M/S)(F/E/V/T)……4/6 B 1-26 stages. DPV(S)(F/E/V/T)……10 B 1-21 stages. DPV(S)(F/E/V/T)……15 B/C 1-17 stages. -------------------------------------- DPV(S) F xx yy B. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. F (VF/VSF) = round flange. x = flow rate m³/h (25, 40, 60, 90(model 85) or 125). yy = no. of stages ……25 B 1-12 stages. ……40/60 B 1-10 stages. ……85 B 1-6 stages. ……125 B 1-4 stages. -------------------------------------- DPHI x yy = Vertically oriented (AISI 304). DPHSI x yy = Vertically oriented (AISI 316). Where: I = Inner thread connection. x = flow rate m³/h (2, 4, 6, 10 or 15). yy = no. of stages DPH(S)I 2/4/6 B 1-14 stages. DPH(S)I 10 B/15 B/15 C 1-8 stages.

Approval Holder:

Duijvelaar Pompen B.V.

Company Name

Duijvelaar Pompen B.V.

Address

Kalkovenweg 13 2401 LJ Alpen aan den Rijn

Country

Netherlands

Phone

0031 0172 488388

View All Listings by this Company