Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250704708

Shock arrestors with a copper body, plastic shuttle and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: WHA-G12M-LL: ½” BSP (M), WHA-G34M-LL: ¾” BSP (M), WHA-G1M-LL: 1” BSP (M), WHA-AM-LL: ½” NPT (M), WHA-BM-LL: ¾” NPT (M), WHA-CM-LL: 1” NPT (M).
Marking:: Yongtong logo, Yongtong, part # (model), size (A, B or C), water hammer arrestor, WRAS and made in China on adhesive label on body.
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: WHA-G12M-LL: 1/2” G Male Water Hammer Arrester, A, WHA-G34M-LL: 3/4” G Male Water Hammer Arrester, B, WHA-G1M-LL: 1” G Male Water Hammer Arrester, C, WHA-AM-LL: 1/2” MIP Water Hammer Arrester, A, WHA-BM-LL: 3/4” MIP Water Hammer Arrester, B, WHA-CM-LL: 1” MIP Water Hammer Arrester, C.

Approval Holder:: Taizhou Yongtong Brass Industry Co., Ltd.

Company Name
Taizhou Yongtong Brass Industry Co., Ltd.
Address
50 Keyuanbei Road, Qinggang, Yuhuan, Zhejiang
Country
China
Phone
+86 0576-87105707
General Email
j.luo@yongtongbrass.com

View All Listings by this Company

WRAS Approval Number: #250302723

Range of multistage centrifugal pumps with stainless steel impellers, intermediate chambers, shaft and outer sleeve. The DPV(M/S) models and DPV(S) models can also incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressures: Existing models: DPV models 10.0 bar, DPVM models with an oval flange or VME models with integral check valve 16.0 bar, All other DPVM models 25.0 bar. DPV(S) models with an oval flange or DPV(S)(E) models with integral check valve 16.0 bar, All other DPV(S) models and DPH(S)I models 25.0 bar. Maximum operating temperatures: DPHM, DPVE and DPVME models with integral check valve 60°C, all other model variants 100°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250302723
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DPHM 2/4/6 B: 1¼” BSP (F) inlet x 1” BSP (F) outlet. DPV(M/S)(F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. DPV(S) (F/E/V/T) 10 B/15 B/15 C: Oval flange: DN40, DN50. Round flange: DN40, DN50. External threaded: 1½” BSP (M), Victaulic: DN50 and Tri-clamp: DN50. DPV(S)F 25/40/60/85/125 B: Round flange: DN65, DN80, DN100, DN125. DPH(S)I 2/4/6 B: 1¼” BSP or NPT (F). DPH(S)I 10/15 B/C: 2” BSP or NPT (F).
Marking:: DPVF & logo, model name, PN, WRAS and technical information on adhesive label on body.
Installation Requirements:: R001 R415
Expiry date:: 31/03/2030
Model:: DPHM x yy B. Where: x = flow rate m³/h (2, 4 or 6). yy = no. of stages ranges 1-6 stages. ------------------------------------- DPV(M/S)(F/E/V/T) x yy B/C Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. No indication (V/VS only) = oval flange. F (VF/VSF) = round flange. E (VE) = external thread. V (VV/VSV) = Victaulic. T (VT/VST) = Triclamp. x = flow rate m³/h (2, 4, 6, 10, 15). yy = no. of stages DPV(M/S)(F/E/V/T)……2 B 1-30 stages. DPV(M/S)(F/E/V/T)……4/6 B 1-26 stages. DPV(S)(F/E/V/T)……10 B 1-21 stages. DPV(S)(F/E/V/T)……15 B/C 1-17 stages. -------------------------------------- DPV(S) F xx yy B. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. F (VF/VSF) = round flange. x = flow rate m³/h (25, 40, 60, 90(model 85) or 125). yy = no. of stages ……25 B 1-12 stages. ……40/60 B 1-10 stages. ……85 B 1-6 stages. ……125 B 1-4 stages. -------------------------------------- DPHI x yy = Vertically oriented (AISI 304). DPHSI x yy = Vertically oriented (AISI 316). Where: I = Inner thread connection. x = flow rate m³/h (2, 4, 6, 10 or 15). yy = no. of stages DPH(S)I 2/4/6 B 1-14 stages. DPH(S)I 10 B/15 B/15 C 1-8 stages.

Approval Holder:: Duijvelaar Pompen B.V.

Company Name
Duijvelaar Pompen B.V.
Address
Kalkovenweg 13 2401 LJ Alpen aan den Rijn
Country
Netherlands
Phone
0031 0172 488388

View All Listings by this Company

WRAS Approval Number: #250702722

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. Maximum operating temperature 35°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250702722
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: U3, U5, P3 or P5: 1” BSP (F) inlet x 1” BSP (F) outlet. U7 or P7: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U9 or P9: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U18 or P18: 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Ultra Models: Pentax logo and other technical data on data plate on body. Plus Models: Foras logo (brand of Pentax SpA) and other technical data on data plate on body
Installation Requirements:: R001 R415
Expiry date:: 31/07/2030
Proviso:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Model:: ULTRA range: U 3 – XX/Y, U 5 – XX/Y, U 7 – XX/Y, U 9 – XX/Y, U 3 – XX/Y T, U 5 – XX/Y T, U 7 – XX/Y T, U 9 – XX/Y T, U 18 – XX/Y T. PLUS range: P 3 – XX/Y, P 5 – XX/Y, P 7 – XX/Y, P 9 – XX/Y, P 3 – XX/Y T, P 5 – XX/Y T, P 7 – XX/Y T, P 9 – XX/Y T, P 18 – XX/Y T. Where: U or P = model type. U = ULTRA, P = PLUS. 3/5/7/9/18 = nominal flow rate in m³/h. XX = nominal power HPx100. U3 or P3 (single or three phase): 50-150. U5 or P5 (single or three phase): 70-200. U7 or P7 (single phase): 100-300. U7 or P7 (three phase): 100-350. U9 or P9 (single or three phase): 100-250. U18 or P18 (three phase only): 180-400. Y = Number of impellers. U3, U5, P3 or P5 (single or three phase): 2-7 stages. U7 or P7 (single phase): 2-6 stages. U7 or P7 (three phase): 2-7 stages. U9 or P9 (single or three phase): 2-5 stages. U18 or P18 (three phase only): 2-4 stages. Blank or T = motor: blank = single phase, T = 3 phase

Approval Holder:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company
Manufacturer:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company

WRAS Approval Number: #250708701

A range of variable speed booster pumps with stainless steel bodies and impeller. Maximum working pressure: 8 bar. Maximum operating temperature: 35°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250708701
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1” BSP (F) x 1” BSP (F).
Marking:: Calpeda and logo on adhesive label located on the pump’s inverter cover.
Installation Requirements:: R001 R415
Expiry date:: 31/07/2030
Model:: MÈTA - Single pump variable speed pressure boosting system with integrated control, 1.35kW, nominal speed n=4500rpm, IPX4. MÈTA SMALL - Single pump variable speed pressure boosting system with integrated control, 0.65kW, nominal speed n=5800rpm, IPX4. MÈTA-2 - Single pump variable speed pressure boosting system with integrated control, 1kW, nominal speed n=5800rpm, IPX4.

Approval Holder:: Calpeda S.p.A

Company Name
Calpeda S.p.A
Address
Via Roggia Di Mezzo 39 36050 Montoro Vicentino Vicenza
Country
Italy

View All Listings by this Company

WRAS Approval Number: #260202002

Range of interlocked EPDM lined shower hoses assemblies with EPDM gaskets. Maximum operating temperature: 85°C Open outlet use only.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 260202002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Kaiping Hualing logo, WRAS and Date of manufacture (YYYY) on ferrule
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: WS14-F001 - 1/2" BSP (F) WS14-F002 - 1/2" BSP (F) x M15 WS16-F001 - 1/2" BSP (F) Various finishes "Electrolysis, ROSE GOLD, Zirconium gold, Titanium gold, Brush PVD, PVD BLACK, Brush zirconium gold, MATTE BLACK, BRUSHED GUN GREY and Chromed"

Manufacturer:: Kaiping City Hualing Hoses Co Ltd

Company Name
Kaiping City Hualing Hoses Co Ltd
Address
No.18 East Road, Industrial Park Shuikou Town Kaiping City Guangdong Province
Country
CHINA

View All Listings by this Company

WRAS Approval Number: #250702021

Range of shower handsets and headsets with chromium plated plastic bodies. Models P60901 and P61400 have check valves fitted at the inlets however, the complete products have not been fully tested to demonstrate they provide backflow prevention. Maximum working pressure: Open outlet. Maximum operating temperature: 60.0°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250702021
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP Female (shower head) ½” BSP Male (shower handset)
Marking:: Solex on ball joint (overhead shower), Solex on body (handset).
Installation Requirements:: R001 R040
Expiry date:: 31/07/2030
Model:: P22000 (Shower head), P22200 (Shower head), P26500 (Shower head), P60901 (shower handset), P61501 (shower handset), P61400 (shower handset), P61403 (shower handset), P60700 (shower handset), P60701 (shower handset).

Approval Holder:: Xiamen Solex High-Tech Industries Co., Ltd.

Company Name
Xiamen Solex High-Tech Industries Co., Ltd.
Address
No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022
Country
China
General Email
brian_lin@mysolex.com

View All Listings by this Company
Manufacturer:: Xiamen Solex High-Tech Industries Co., Ltd.

Company Name
Xiamen Solex High-Tech Industries Co., Ltd.
Address
No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022
Country
China
General Email
brian_lin@mysolex.com

View All Listings by this Company

WRAS Approval Number: #250702026

Range of fixed shower arms, (brass bodies - various finishes) with EPDM O-Rings. Maximum operating temperature: 85°C, open outlet use only.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250702026
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm female inlet x 1/2" BSP (M)
Marking:: Aqualisa on cover plate
Installation Requirements:: R001 R040
Expiry date:: 31/07/2030
Model:: 1001413 XX OPN2003 XXXXXX Finish options: 704232-Chrome, 706385 – PVD Matt Black, 706394 – PVD Brushed Brass)

Product Images

Approval Holder:: Aqualisa Products Ltd.

Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

WRAS Approval Number: #250702049

Range of shower arms with brass bodies. Models 91xx7034 & 91xx9323 incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 80.0°C (models 86xxxxxx) or 60.0°C (models 91xxxxxx)

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250702049
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Open outlet
Size:: ½” BSP (M)
Marking:: Fantini on backplate
Installation Requirements:: R001 R040
Expiry date:: 31/07/2030
Model:: 86xx8027 86xx8028 86xx8137 91xx7034 91xx9323 Where xx is replaced with the following to denote finish: 01 = Gold Plus, 02 = Chrome, 13 = Matt Black, 29 = Matt White, 38 = Polished Stainless Steel, 93 = Brushed Stainless Steel, 95 = Nickel PVD, P5 = Matt Gun Metal PVD, P6 = Matt British Gold PVD, P9 = Matt Copper PVD, S1 = Deep Black PVD, Q7 = Pure Brass PVD, Q8 = Raw Metal PVD.

Manufacturer:: Fratelli Fantini Spa

Company Name
Fratelli Fantini Spa
Address
Via Buonarroti 4 28010 Pella Italy

View All Listings by this Company

WRAS Approval Number: #251204003

Range of wall mounted shower outlets (chromium plated brass). Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 251204003
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M).
Marking:: DTC 15 on back plate.
Installation Requirements:: R001 R040
Expiry date:: 31/12/2030
Model:: ARMW02 Round Wall Mounted Shower Arm, ARMW05 Square Wall Mounted Shower Arm, SAW148 148mm Wall Mounted Shower Arm, SAW320 Overhead Wall Mounted Shower Arm.

Approval Holder:: Methven UK Limited

Company Name
Methven UK Limited
Address
Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

WRAS Approval Number: #250504008

Range of (chrome plated) plastic shower handsets with flexible shower hose and stainless-steel braided connection hose. The inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C. Open outlet use only.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250504008
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: R009 only applied to the flexible braided inlet hose that connects to the shower hose.
Size:: ½” BSP (F) captive nut.
Marking:: Gessi Emporio etched on face plate.
Installation Requirements:: R001 R009 R040
Expiry date:: 31/05/2030
Model:: 47227, 47127.

Approval Holder:: Gessi S.p.A.

Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company