Range of click type, pop-up wastes with metal bodies. Maximum operating temperature 60.0°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

241002704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1 ¼” BSP (M)

Marking:

Vinzia Fratelli logo, EN274, NF logo and date of manufacturer (DDD/YY)

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

04, 05, 06 family types. Code example: 00 AA 00 00 00 00 AA(A). Made up of the below. TYPE OF WASTE (2 numbers) 04 - Waste Simple-Rapid with waste drains H60 – 75 – 100 05 - Waste Simple-Rapid with waste drains 06 - Waste free flow with all waste drains CAP (2 letters) AA - TA209 AB - TA204 AC - CO032 + TA406 (in this case the first two numbers are”04 or 05”) or TA200 + TA413 in this case the first two numbers are”06”) BA – TA191 BC – TA193 (in this case the first two number as “05”) or TA198 (in this case the first two number are”06”) BD – TA197 BE – TA195 BH – TA201 CA - TA6 + TA217 / TA229 (in this case the first two numbers are”04 or 05”) or TA6 + PA001 in this case the first two numbers are”06”) WASTE DRAIN (2 numbers) 01 - PI096 02 - PI087 03 - PI088 07 - PI096/STP 08 - PI110/STP 09 - PI088/STP 11 - PI082 19 - PI084/1STP 20 - PI084/1 21 - PI082/STP 24 - PI083 25 - PI083/STP 50 - PI099 51 – PI209 52 – PI210 62 – PI207 85 – PI010 BASE (2 numbers) 01 - RA095 02 - RA096 07 - CO110 16 - RA014 17 - RA009 50 - RA094 51 - RA100 54 - RA002 VARIANTS (2 numbers) 00 - STANDARD COMPONENTS PACKAGING (2 numbers) 00 - STANDARD PACKAGING FINISH (2 or 3 letters) CR - CHROME PLATED (these two letters are always compiled) + None - ME235-AB or no mechanism (for free flow ones) CRG - ME238

Product Images

Approval Holder:

VINZIA Fratelli S.p.A.

Company Name

VINZIA Fratelli S.p.A.

Address

Via Borgomanero, 121 Briga Novarese (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 94847

General Email

gianfranco.calzoni@vinzia.com

View All Listings by this Company

Range of single hole, deck mounted flow control, (brass bodies - various finishes) incorporating a ceramic cartridge headwork and lever type operating member. Maximum working pressure 5 bar. Maximum operating temperature 60°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

250304002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

Villeroy & Boch logo on operating member

Installation Requirements:

R001 R009

Expiry date:

31/03/2030

Model:

TVT106514150XX Dawn TVT106514153XX Dawn XX= Finishing 61= Chrome 64=Brushed Nickel 76=Brushed gold K5= Matt black

Product Images

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 4.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102721

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

ESPA, model & technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

ESPH XXS-XX\XX 1.XX:Rated flow(m³/h),range:2、3、4、8、10、12、16、20m³/h 2.XX:Impeller progession (1,2,3,4,5,6,7)*5 3.xx:Small Impeller (1) 4.End connection mode and size Rated flow(2、3m³ /h) :G1"XG1" Rated flow(4m³ /h) :G1¼"XG1" Rated flow(8、10、12m³ /h) :G1½"XG1½" Rated flow(16、20m³ /h) :G2"XG2"

Approval Holder:

ESPA

Company Name

ESPA

Address

PO Box 8156 Warehouse Q4 - 123 Sharjah Airport Free Zone, Sharjah

Country

United Arab Emirates

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

ESPA, model & technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

MULTI VSXXX-XX-(1/2/C/D/2C/2D/C-D) -(F/N) -E 1. XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2. XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2，On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4. F/N: the materials of wetted parts --N，material is SUS 316. --F，material is SUS 304. 5. E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150

Approval Holder:

ESPA

Company Name

ESPA

Address

PO Box 8156 Warehouse Q4 - 123 Sharjah Airport Free Zone, Sharjah

Country

United Arab Emirates

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102723

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

TPF on cover. TPF, model & technical information on data label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

TPVSXXX-XX-(1/2/C/D/2C/2D/C-D) -(B) -E 1.XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2.XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2 ， On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4.B: the materials of wetted parts --B，material is SUS 316. --None，material is SUS 304. 5.E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150 THM(-3)XX-XX\XX-SE 1. -3: different phase. -- -3: three phase，none: single phase. 2.XX: Rated flow（m³/h），range: 2、3、4、8、10、12、 16、20m³/h. 3.XX: impeller progession (1,2,3,4,5,6,7) 4.XX: Small Impeller（1,2,3,4,5, ） 5.SE: SE Intelligent Type End connection mode and size Rated flow (2、3m³ /h) :G1"XG1" Rated flow (4m³ /h) :G1¼"XG1" Rated flow (8、10、12m³ /h) :G1½"XG1½" Rated flow (16、20m³ /h) :G2"XG2"

Approval Holder:

TADMUR PUMP FACTORY WLL

Company Name

TADMUR PUMP FACTORY WLL

Address

P.O. BOX 212023 DOHA

Country

Qatar

View All Listings by this Company

Range of cold-water supply booster sets, incorporating a stainless-steel manifold system and between 1 and 4 pumps depending on model. The booster sets also incorporate spherical valves and non-return valves. Maximum working pressure 16.0 Bar Maximum operating temperature 23.0°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250702702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Manifold size is dependent on pump type and number of pumps, as shown below: Pump Type, No. of Pumps, Inlet Size, Outlet Size 1SV, 1, 1" BSP (M), 1" BSP (M) 1SV, 2, 2" BSP (M), 2" BSP (M) 1SV, 3, 2" BSP (M), 2" BSP (M) 1SV, 4, 2" BSP (M), 2" BSP (M) 3SV, 1, 1" BSP (M), 1" BSP (M) 3SV, 2, 2" BSP (M), 2" BSP (M) 3SV, 3, 2" BSP (M), 2" BSP (M) 3SV, 4, 2" BSP (M), 2" BSP (M) 5SV, 1, 1.1/4" BSP (M), 1.1/4" BSP (M) 5SV, 2, 2" BSP (M), 2" BSP (M) 5SV, 3, 2" BSP (M), 2" BSP (M) 5SV, 4, 2.1/2" BSP (M), 2.1/2" BSP (M) 10SV, 1, 1.1/2" BSP (M), 1.1/2" BSP (M) 10SV, 2, 2.1/2" BSP (M), 2.1/2" BSP (M) 10SV, 3, 3" BSP (M), 3" BSP (M) 10SV, 4, 3" BSP (M), 3" BSP (M) 15SV, 1, 2" BSP (M), 2" BSP (M) 15SV, 2, 3" BSP (M), 3" BSP (M) 15SV, 3, DN100 Flanged, DN100 Flanged 15SV, 4, DN125 Flanged, DN100 Flanged 1HM, 1, 1" BSP (M), 1" BSP (M) 1HM, 2, 2" BSP (M), 2" BSP (M) 1HM, 3, 2" BSP (M), 2" BSP (M) 1HM, 4, 2" BSP (M), 2" BSP (M) 3HM, 1, 1" BSP (M), 1" BSP (M) 3HM, 2, 2" BSP (M), 2" BSP (M) 3HM, 3, 2" BSP (M), 2" BSP (M) 3HM, 4, 2" BSP (M), 2" BSP (M) 5HM, 1, 1.1/4" BSP (M), 1" BSP (M) 5HM, 2, 2" BSP (M), 2" BSP (M) 5HM, 3, 2" BSP (M), 2" BSP (M) 5HM, 4, 2.1/2" BSP (M), 2.1/2" BSP (M) 10HM, 1, 1.1/2" BSP (M), 1.1/4" BSP (M) 10HM, 2, 2.1/2" BSP (M), 2.1/2" BSP (M) 10HM, 3, 2.1/2" BSP (M), 2.1/2" BSP (M) 10HM, 4, 3" BSP (M), 3" BSP (M) 15HM, 1, 2" BSP (M), 1.1/2" BSP (M) 15HM, 2, 3" BSP (M), 3" BSP (M) 15HM, 3, DN100 Flanged, DN80 Flanged 15HM, 4, DN100 Flanged, DN100 Flanged 22HM, 1, 2" BSP (M), 1.1/2" BSP (M) 22HM, 2, 3" BSP (M), 3" BSP (M) 22HM, 3, DN100 Flanged, DN100 Flanged 22HM, 4, DN125 Flanged, DN100 Flanged 22SV, 1, 2" BSP (M), 2" BSP (M) 22SV, 2, 3" BSP (M), 3" BSP (M) 22SV, 3, DN100 Flanged, DN100 Flanged 22SV, 4, DN125 Flanged, DN100 Flanged

Marking:

Lowara logo, Xylem services and model code on adhesive label on body

Installation Requirements:

R001 R415

Expiry date:

31/07/2030

Model:

Model Code: GHV VV / YYYYYYYYYYYY / W / XX / ZZZ GHV - Series of booster - Variable speed Drive EXM or HVL VV denotes the number of pumps installed, and can be replaced with any of the following: 10 = 1 Pump 20 = 2 Pumps 30 = 3 Pumps 40 = 4 Pumps YYYYYYYYYYYY denotes the type of pumps installed and can be replaced with any of the following: 1SV up to 22SV 1HM up to 22HM W denotes the main voltage supply and can be replaced with any of the following: 4=3*400Vac 2=1*230Vac 3=3*230Vac XX -denotes the option and can be replaced with: CP = free voltage contacts Blank = option not chosen ZZZ denotes the option for a pressure switch on suction and can be replaced with: PMA = pressure switch on suction Blank = option not chosen

Manufacturer:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Range of shower booster pumps (either single or double) with acetal bodies and impellers and EPDM seals and NBR `O` rings. Supplied with stainless-steel braided EPDM lined flexible hoses incorporating isolation valves Please refer to model for maximum operating pressure. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250304714

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm pushfit

Marking:

Stuart Turner and product info label

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

Maximum working pressure 3.8 bar: 47342 Showermate S1.5 bar Twin. 47343 Showermate S2.0 bar Twin. 44925 Showermate S2.0 bar Twin. 44923 Showermate S2.0 bar Single. 44924 Showermate S1.5 bar Twin. 47340 Showermate S2.0 bar Single. Maximum working pressure 4.0 bar: 47341 Showermate S2.6 bar Single. 44920 Showermate S2.6 bar Twin. 44919 Showermate S2.6 bar Single. 47344 Showermate S2.6 bar Twin.

Product Images

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of combined storage and booster sets, incorporating a cold-water storage cistern, submersible pump, solenoid valve or alternative actuated ball valve, non-return valve (not suitable for backflow protection), isolation valves and expansion vessel. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250304718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F)

Marking:

Dutypoint, model & product info on label.

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

Dutypoint Systems ScubaTANK range comprising of models: ‘ WX A BBBB CCC’ – where: ‘A’ denotes number of pumps and is replaced with 1 or 2. ‘BBBB’ denotes pump size and is replaced with 3040, 3060, 3080, 3100, 5040, 5060, 5080, 5100, 9040, 9060 or 9090. ‘CCC’ denotes size of storage cistern in litres and is replaced with 175, 300, 375, 440, 490, 490, 575, 650, 750, 800, 1050, 1250, 1650 or 2250.

Product Images

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Manufacturer:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Range of wall and ceiling overhead shower outlets with chromium plated brass bodies. The inlets incorporate a plastic flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250102019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F)

Marking:

DORNBRACHT on cover plate

Installation Requirements:

R001 R040

Expiry date:

31/01/2030

Model:

28544977, 28545977, 28564977 & 28565977

Product Images

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Manufacturer:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Section:

1650 Shower Outlets

Description:

A Range of Shower head(s) and/or shower handset(s).

Conditions of use Type 1 Overhead shower

Basis of Compliance:

Tested to a standard assessed as an appropriate British Standard by WRAS

Installation Requirements:

R001 R040

Expiry date:

31/05/2030

Notes & Further Information

XXX Denotes the following: First, second & third XXX for different finishes: Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Product Images

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Manufacturers:

PPI XIAMEN INDUSTRY CO LTD