'Rashmi Blast Furnace Slag Cement Mortar'. Factory applied, grey coloured, blast furnace slag cement mortar. Mix cement, sand & water in a mass ratio of 1:1.5:0.6 and apply as per manufacturer's work instructions 'RML/DI/WI/CMLC-10', 'Rev: 02', dated '12.10.2023'. Cure for 120 minutes@50°C, 98% RH. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.
'Grasso L. 100 Lubricating Grease'. White coloured grease. Apply as per manufacturer's instructions. For use with water up to 85°C.
Grivory GV-2H natural & GV-2H black 9915. GV-2 FWA natural & GV-2 FWA black 9225. GV-4H natural & GV-4H black 9915. GV-4 FWA natural & GV-4 FWA black 9225. GV-5H natural & GV-5H black 9915. GV-5 FWA natural, GV-5 FWA black 9225 & Grivory XE 4275 black 9225. GV-6H natural & GV-6H black 9915. GV-6 FWA natural & GV-6 FWA black 9225. Injection moulded, natural (appears white) or black coloured, glass reinforced nylon materials. For use with water up to 23°C.
'Grivory GV XE 10726 Black 9225'. Black coloured, injection moulded, glass reinforced polyamide material. For use with water up 23°C.
'Avaspire AV-651 BK95'. Black coloured, injection moulded PEEK (part of the PAEK family) material. For use with water up to 85°C.
'OL01 HDPE Fitting'. Black coloured, injection moulded HDPE fitting. For use with water up to 60°C.
'Reinert-Ritz PE 100 Fittings'. Black coloured, extruded polyethylene fittings. For use with water up to 85°C.
'IFAN2100-2'. Extruded, multi-layered pipe comprising of natural (appears white) PEX inner layer, aluminium barrier layer and white coloured PEX outer layer. For use with water up to 85°C.
'DURAFIDE® PPS 1140A1 WN9050'. Black coloured, injection moulded PPS material. For use with water up to 85°C.
'PVDF Solef® 1011/0001'. White/off-white coloured (translucent), injection moulded PVDF material. For use with water up to 85°C.
'PVDF Solef® 6008/0001'. White/off-white coloured (translucent), injection moulded PVDF material. For use with water up to 85°C.
'5594821'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.
'5594610'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.
'5594710'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.
'silicone RS7007'. Translucent, colourless, compression moulded silicone rubber material. Shore hardness 70. Tested in-radius size 1.5mm. For use with water up to 85°C.
'FLPTFESC- NavYseal 150M Thread Seal Cord'. White coloured (opaque) thread sealing cord. For use with water up to 85°C.
'C-DE'. Black coloured, compression moulded Butyl rubber membrane. Shore hardness 65. Tested in-radius size 1.0mm. For use with water up to 23°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| GT6002R-D-** | Various | hot/cold water inlet：M8x1, 1/2 BSP(F) Boiling water inlet:M8x1 | hot/cold water path: 10bar Boiling water path:5bar bar | hot/cold water path: 65℃ Boiling water path: 99℃ °C | GETTAI | On handle | No | Ceramic cartridge | Metal Backnuts | Aerator | |
| GT6002R-** | Various | hot/cold water inlet：M8x1, 1/2 BSP(F) Boiling water inlet:M8x1 | hot/cold water path: 10bar Boiling water path:5bar bar | hot/cold water path: 65℃ Boiling water path: 99℃ °C | GETTAI | On handle | No | Ceramic cartridge | Metal Backnuts | Aerator | |
| GT6024-** | Various | hot/cold water inlet：M8x1, 1/2 BSP(F) Boiling water inlet:M8x1 | hot/cold water path: 10bar Boiling water path:5bar bar | hot/cold water path: 65℃ Boiling water path: 99℃ °C | GETTAI | On handle | No | Ceramic cartridge | Metal Backnuts | Aerator | |
| GT6616-** | Various | hot/cold water inlet：M10x1, 1/2 BSP(F) Boiling water inlet:M10x1 | hot/cold water path: 10bar Boiling water path:5bar bar | hot/cold water path: 65℃ Boiling water path: 99℃ °C | GETTAI | On Body | No | Ceramic cartridge | Metal Backnuts | Aerator |
GT6002R-D-** & GT6002R-** only differ in spout Model code: “**” means different finishes -LC Brushed -LE Polished -MOB Matt Black -BK Steel Black -BS PVD Black -GM Gun Metal -CO Copper -GD Gold -TGD Titanium Gold
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S001* | Various | 1/2" BSP (F) | 5 bar | 65 °C | WINSDRUM | On cover plate | No | Ceramic cartridge | Not Applicable | Aerator | Shower Hose, Handset, |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TVW127002001XX | Various | ½” BSP (M) inlets (BD355NU- core valve unit) | 10 bar | 60 °C | Villeroy & Boch | On the rosette | Yes | Aerator | Flow Regulator Fitted, | ||
| TVZ106012001XX | Various | ½” BSP (M) inlets (BD355NU- core valve unit) | 10 bar | 60 °C | Villeroy & Boch | On the rosette | Yes | Aerator | Flow Regulator Fitted, |
XX at the end indicates the Finish of surfaces that are not in contact with water (61 - Chrome, K5 - Matt black, 76 - Brushed gold, 64 - Brushed nickel). Products must be used in conjunction with concealed core valve unit ‘BD355NU Kit 1’ (not included as part of this approval)
Page 521 of 522
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
