Range of expansion vessels with EPDM membrane and stainless steel flange connections. Maximum working pressure of 10.0 bar. Maximum operating temperature 100°C.

Section:

1000 Expansion Vessels

WRAS Approval Number:

2110388

Note:

Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum

Size:

½” BSP (M), ¾” BSP (M) & 1” BSP (M)

Marking:

Aquasystem & technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

XVES050020, 5L VERTICAL POT VESSEL WHITE PRE-SET 3.0 XVES050030, 8L VERTICAL POT VESSEL WHITE PRE-SET 3.0 XVES050031, 8L VERT POT VESSEL WHITE 3.5B XVES050036, 8L POT VESSEL INTER BRACKET PRE-SET 3.5 XVES050040, 12L VERT POT VESSEL WHITE PRE-SET 3.0 XVES050041, 12L VERT POT VESSEL WHITE 3.5B XVES050042, 12L VERT POT VESSEL WHITE 2.2B XVES050045, 12L POT VESSEL 3.0BAR C/W BRKT VERTICAL XVES050046, 12L POT VESSEL 3.5BAR C/W BRKT VERTICAL XVES050047, 12L POTABLE VESSEL 4BAR W/ INT BRACKET XVES050050, 18L VERT POT VESSEL WHITE PRE-SET 3.0 XVES050051, 18L VERT POT VESSEL WHITE 3.5B XVES050052, 18L VERT POT VESSEL WHITE 2.2B XVES050055, 18L POT VESSEL 3.0BAR C/W BRKT VERTICAL XVES050056, 18L POT VESSEL 3.5BAR C/W BRKT VERTICAL XVES050057, 18L POTABLE VESSEL 4.0BAR W/ BRACKET XVES050060, 24L VER POT VESSEL WHITE PRE-SET 3.0 XVES050061, 24L VERT POT VESSEL WHITE 3.5B XVES050062, 24L VERT POT VESSEL WHITE 2.2B XVES050065, 24L POT VESSEL 3.0BAR C/W BRKT VERTICAL XVES050066, 24L POT VESSEL 3.5BAR C/W BRKT VERTICAL XVES050067, 24L POTABLE VESSEL 4.0BAR W/ BRACKET XVES050075, 35L VERT POT VES WHITE PRE 3BAR C/W BRK XVES050080, 50L VERTICAL POT VESSEL BLUE PRE-SET 3.0

Manufacturer:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

View All Listings by this Company

‘Unidelta Deltapress’ range of brass press-fit fittings for use with ‘Unidelta Flexall’ PE-RT/AL/PE-RT pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1105 Multi-Layered Pipe Systems

Section Subtitle:

Compatible fittings and pipe systems for use with hot and cold water. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201026

Marking:

Unidelta logo and size on crimping sleeve of fitting. Unidelta FLEXALL, size and technical information on pipe.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

‘Unidelta Deltapress’ fittings for use with ‘Unidelta Flexall’ PE-RT/AL/PE-RT pipe. Fitting crimp profiles: TH, H & U: • Cod.4001 (Coupling): 16x16mm, 18x18mm, 20x20mm, 26x26mm, 32x32mm. • Cod.4002 (Reducing coupling): 18x16mm, 20x16mm, 20x18mm, 26x16mm, 26x20mm, 32x20mm, 32x26mm. • Cod.4003 (BSP Male adaptor): 16mmx3/8”, 16mmx1/2”, 18mmx1/2”, 18mmx3/4”, 20mmx1/2”, 20mmx3/4”, 26mmx3/4”, 26mmx1”, 32mm x1". • Cod.4004 (BSP Female adaptor): 16mmx1/2”, 18mmx1/2”, 18mmx3/4”, 20mmx1/2”, 20mmx3/4”, 26mmx3/4”, 26mmx1”, 32mmx1”. • Cod.4005 (90° Tee): 16x16mm, 18x18mm, 20x20mm, 26x26mm, 32x32mm. • Cod.4006 (90° Elbow): 16x16mm, 18x18mm, 20x20mm, 26x26mm, 32x32mm. • Cod.4007 (90° Tee with threaded BSP Female take off): 16mmx1/2”x16mm, 18mmx1/2”x18mm, 20mmx1/2”x20mm, 20mmx3/4”x20mm, 26mmx3/4”x26mm, 32mmx1”x32mm. • Cod.4008 (90° Elbow with threaded BSP Male take off): 16mm x1/2”, 18mmx1/2”, 20mmx1/2”, 20mmx3/4”, 26mmx3/4”, 32mmx1”. • Cod.4009 (90° Elbow with threaded BSP Female take off): 16mm x1/2”, 18mmx1/2”, 20mmx1/2”, 20mmx3/4”, 26mmx3/4”, 32mmx1”. • Cod.4010 (90° Tee with threaded BSP Male take off): 16mmx1/2”x16mm, 20mmx1/2”x20mm, 20mmx3/4”x20mm, 26mmx3/4”x26mm. • Cod.4011 (45° Elbow): 26x26mm, 32x32mm. • Cod.4013 (90° Reducing tee): 18x16x18mm, 20x16x16mm, 20x16x20mm, 20x18x20mm, 20x20x16mm, 26x16x20mm, 26x16x26mm, 26x20x20mm, 26x20x26mm, 26x26x16mm, 26x26x20mm, 32x20x32mm, 32x26x26mm, 32x26x32mm. • Cod.4029 (90° Tee with increased take off): 16x20x16mm, 20x26x20mm. • Cod.4034 (Wall plate elbow fitting): 16mmx1/2” short version, 16mmx1/2” long version, 18mmx1/2”, 20mmx1/2” short version, 20mmx1/2” long version, 20mmx3/4”. • Cod.4035 (Double wall plate elbow fitting): 16mmx1/2”, 20mmx1/2”.

Product Images

Approval Holder:

Unidelta SpA

Company Name

Unidelta SpA

Address

Via Capparola Sotto 4, 25078 Vestone (Brescia)

Country

Italy

View All Listings by this Company

Manufacturer:

Unidelta SpA

Company Name

Unidelta SpA

Address

Via Capparola Sotto 4, 25078 Vestone (Brescia)

Country

Italy

View All Listings by this Company

‘HE-705X & HE-715X’ ranges of brass crimp fit fittings incorporating EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057-2006). HE-7052/7053/7058/7059 & HE-7152/7153/7158/7159 models also incorporate a NBR gasket. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2109058

Size:

See model

Marking:

HONGEN, WRAS and size on crimp connection.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

M-type connection: HE-7050 - straight connector - pressfit x BSP (M): 15-54mm x ½”-2”. HE-7051 - straight connector - pressfit x BSP (F): 15-54mm x ½”-2”. HE-7052 - straight connector (with central captive nut and washer) - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7053 - straight connector (with central captive nut and washer) - pressfit x pressfit: 15x15-28x28mm. HE-7054 - 90° elbow - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7055 - 90° elbow - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7056 - 90° wall plate elbow - pressfit x BSP (F): 15-22mm x ½”-¾”. HE-7057 - tee - pressfit x BSP (F) x pressfit: 15-54mm x ½” & 22-28 x ¾”. HE-7058 - straight connector (with central captive nut and washer) - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7059 - straight connector - pressfit x captive nut and washer: 15-28mm x ¾”-1¼”. V-type connection: HE-7150 - straight connector - pressfit x BSP (M): 15-54mm x ½”-2”. HE-7151 - straight connector - pressfit x BSP (F): 15-54mm x ½”-2”. HE-7152 - straight connector (with central captive nut and washer) - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7153 - straight connector (with central captive nut and washer) - pressfit x pressfit: 15x15-28x28mm. HE-7154 - 90° elbow - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7155 - 90° elbow - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7156 - 90° wall plate elbow - pressfit x BSP (F): 15-22mm x ½”-¾”. HE-7157 - tee - pressfit x BSP (F) x pressfit: 15-54mm x ½” & 22-28 x ¾”. HE-7158 - straight connector (with central captive nut and washer) - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7159 - straight connector - pressfit x captive nut and washer: 15-28mm x ¾”-1¼”.

Product Images

Approval Holder:

YUHUAN HONGEN VALVE CO., LTD

Company Name

YUHUAN HONGEN VALVE CO., LTD

Address

Sanliancun, 317605, Yuhuan, Zhejiang, China

View All Listings by this Company

Manufacturer:

YUHUAN HONGEN VALVE CO., LTD

Company Name

YUHUAN HONGEN VALVE CO., LTD

Address

Sanliancun, 317605, Yuhuan, Zhejiang, China

View All Listings by this Company

VSH XPRESS Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106049

Size:

12mm - 108mm.

Marking:

DVGW, XPRESS & SIZE ON BODY

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

7001 22, 7002 22, 7001 15, 7002 15, 7040 22, 7130 15 & 7130 22 PRESS FITTINGS 6270 Copper Press Coupling: 12 - 108mm. 6271 Copper Press Coupling: 12 - 54mm. 6240 Reducer press x press: 15mmx12mm - 54mmx42mm. 6243 Reducer x press: 15mmx12mm - 108mm x 88.9mm. 6001 Bend 90° x press: 12-108mm. 6002 Bend 90° press x press: 12 - 108mm. 6130 Equal Tee 3 x press: 12 - 108mm. 6040 Bend 45° x press: 12 - 108mm. 6041 Bend 45° press x press: 12 - 108mm. 6301 Endcap press: 12 - 108mm. 6131 Reducing Tee 3 x press: 15mmx15mmx12mm - 108mm x 76.1mm x 108mm. 6085 Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 Flange PN16: 76.1mm.

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of PVC-u solvent weld and threaded union fittings incorporating an EPDM ‘O’-ring. For use with PVC-u pipe manufactured to ISO 1452 and DIN 8063. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201016

Note:

This approval does not include solvent cement.

Size:

See model.

Marking:

ERA® (registered trademark of Yonggao Co. Ltd.), size and PN on nut.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

Union UU001: 20mm-110mm Male Union UU002: 20mm-63mm x ¼”-2” BSP (F)

Product Images

Approval Holder:

ERA Piping (Zhejiang) Co.,Ltd.

Company Name

ERA Piping (Zhejiang) Co.,Ltd.

Address

No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ERA Piping (Zhejiang) Co.,Ltd.

Company Name

ERA Piping (Zhejiang) Co.,Ltd.

Address

No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang

Country

China

View All Listings by this Company