Drain cock elbow incorporating a DZR brass body with EPDM ’O’-rings (ZELB250445 model) or NBR ‘O’-rings (ZELB250446 model added July 2022). Both models are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressures: ZELB250445 model - 10.0 Bar. ZELB250446 - 16.0 bar. Maximum operating temperature 85°C.

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2102701

Size:

See model.

Marking:

ZELB250445 model: RWC, CR and size on body. ZELB250446 model added July 2022: RWC, CR, size and BS2879 on body.

Installation Requirements:

R001 R511

Expiry date:

28/02/2026

Model:

ZELB250445: 22mm compression x ¾” BSP (M). Model added July 2022: ZELB250446 model: 28mm compression x 1” BSP (M).

Approval Holder:

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Address

HORTON ROAD WEST DRAYTON

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Spherical valve with a brass body and ball, PTFE seat, EPDM ‘O’-rings, a lever operating member and a drain connection outlet. Compression end connection for use with copper pipe (manufactured to BS EN 1057). The product is supplied with a brass cap and an EPDM washer which is interchangeable with the hose union spigot outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2211704

Size:

15mm compression x 15mm hose union spigot.

Marking:

RWC, size and BS EN 1254-2 on compression nut.

Installation Requirements:

R001 R511

Expiry date:

30/11/2027

Model:

BALV900003 (BALL VALVE 100C WITH DRAIN CONNECTION).

Approval Holder:

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Address

HORTON ROAD WEST DRAYTON

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of stainless steel over braided, PEX lined flexible hoses, incorporating EPDM or fibre washers. Maximum working pressure: 6.0 bar. Maximum operating temperature: 65°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240702080

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm Compression x 1/2" BSP (M)

Marking:

Qualflex, QWRAS, year of manufacture (YY) and temperature and pressure on ferrule.

Installation Requirements:

R001 R008

Expiry date:

31/07/2029

Model:

HOSE265013

Approval Holder:

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Address

HORTON ROAD WEST DRAYTON

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of multi-layered flexible hoses (TPE inner liner/PVC middle/PVC outer with polyester braiding in-between) and stainless-steel braided EPDM flexible hoses. The hoses are supplied with a variety of end connections incorporating brass barbed hose inserts or white plastic barbed hose inserts. The hoses may also incorporate a servicing valve (see model). The push fit connectors are to be used with copper pipe (Manufactured to EN1057), PB pipe (Manufactured to BS EN21003) & PE-x pipe (manufactured to BS EN7291-3). Products shown with a “P” suffix (eg. WFLX15P, FLX43P) are a prepacked variant of the original product eg. WFLX15, FLX43. Products shown with a “SB” suffix (eg. FLX15P-SB, WFLX28-SB) are a reduced box quantity of an existing product. Maximum working pressure and operating temperature: 12.0 bar @ 20°C and 6.0 bar @ 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2110096

Size:

See model.

Marking:

John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.), WRAS, date of manufacture (YYWW), maximum temperature and pressure on hose. John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.), size and maximum temperature on connector. Markings added December 2022: WRAS & DoM (YYYY) on ferrule (braided hoses only) or WRAS, DoM (YYYY) & other technical info on hose body (non-braided hoses only). JG (John guest Logo), Size and Max Temperature on Pushfit Connector (When applicable). JG (John guest Logo) and Size on Service Valve (when applicable).

Installation Requirements:

R001 R008

Expiry date:

31/10/2026

Model:

Speedfit x Union Nut 300mm hose: WFLX15: 15mm push-fit x ½” BSP captive nut WFLX16: 15mm push-fit x ¾” BSP captive nut WFLX22: 22mm push-fit x ¾” BSP captive nut Speedfit x Union Nut: 500mm hose: WFLX18: 15mm push-fit x ½” BSP captive nut WFLX20: 15mm push-fit x ¾” BSP captive nut WFLX19: 22mm push-fit x ¾” BSP captive nut Speedfit x Union Nut: 1000mm hose: WFLX40: 15mm push-fit x ½” BSP captive nut Speedfit x Union Nut with Service Valve: 300mm hose: WFLX37-H: 15mm push-fit x ½” BSP captive nut service valve hose WFLX39-H: 22mm push-fit x ¾” BSP captive nut service valve Hose Speedfit x Speedfit: 300mm hose: WFLX33: 10mm push-fit x 15mm push-fit WFLX17: 15mm push-fit x 15mm push-fit Speedfit x Speedfit: 500mm hose: WFLX21: 15mm push-fit x 15mm push-fit Elbow Pattern: 300mm hose: WFLX36: 15mm push-fit x ½” BSP captive nut Elbow Speedfit x Hand Tighten Nut: 300mm hose: PFLX15: 15mm push-fit x ½” BSP captive nut PFLX16: 15mm push-fit x ¾” BSP captive nut PFLX22: 22mm push-fit x ¾” BSP captive nut Speedfit x Hand Tighten Nut: 500mm hose: PFLX18: 15mm push-fit x ½” BSP captive nut PFLX19: 22mm push-fit x ¾” BSP captive nut Speedfit x Hand Tighten Union Nut with Service Valve: 300mm hose: PFLX37: 15mm push-fit x ½” BSP captive nut service valve hose PFLX37-H: 15mm push-fit x ½” BSP captive nut service valve with handle hose Speedfit x Hand Tighten Union Nut with Service Valve: 500mm hose: PFLX78: 15mm push-fit x ½” BSP captive nut service valve hose Extra Flexi Speedfit x Hand tighten Nut: 300mm hose: PFLX88: 15mm push-fit x ½” BSP captive nut Speedfit with Plastic Valve with Handle x Bulkhead connection: 429mm hose: NCWFLX54-H: 15mm push-fit service valve x ½” BSP bulkhead Speedfit with Elbow Plastic Valve with Handle x Bulkhead connection: 530mm hose: NCWFLX58-H: 15mm push-fit x ½” BSP Elbow Service Valved hose Speedfit with Plastic Valve with Handle x Hand Tighten Union Nut: 342mm hose: NCWFLX37-H: 15mm Plastic Valved Hose Connector x ½” Flexi Hose Models added December 2022. Speedfit x Union Nut: 300mm hose: WFLX15-SB: 15mm push-fit x ½” BSP captive nut, 300mm hose. WFLX16-SB: 15mm push-fit x ¾” BSP captive nut, 300mm hose. WFLX22-SB: 22mm push-fit x ¾” BSP captive nut, 300mm hose. For Monobloc Mixers WFLX28: 15mm push-fit x M10 monobloc hose kit, 300mm hose. WFLX29: 15mm push-fit x M12 monobloc hose kit, 300mm hose. Speedfit with Shut Off Valve and Hand Tighten Union Nut x Bulkhead, Short. NCWFLX98-H: 1/2” bsp BULKHEAD x 1/2 bsp Shut Off Valve Flexi Hose. (Short). SPEEDFIT X UNION NUT: 100mm hose FLX43: 15mm pushfit x ½” captive nut - 150mm hose SPEEDFIT X UNION NUT: 300mm hose FLX35, FLX35P: 15mm pushfit x ⅜” captive nut - 300mm hose FLX15, FLX15P, FLX15P-SB: 15mm pushfit x ½” captive nut - 300mm hose FLX16, FLX16P, FLX16P-SB: 15mm pushfit x ¾” captive nut - 300mm hose FLX22, FLX22P, FLX22P-SB: 22mm pushfit x ¾” captive nut - 300mm hose SPEEDFIT X UNION NUT: 500mm hose FLX18, FLX18P, FLX18P-SB: 15mm pushfit x ½” captive nut - 500mm hose FLX20, FLX20P, FLX20P-SB: 15mm pushfit x ¾” captive nut - 500mm hose FLX19, FLX19P, FLX19P-SB: 22mm pushfit x ¾” captive nut - 500mm hose. FLX23, FLX23P: 22mm pushfit x ¾” captive nut - 500mm hose SPEEDFIT X UNION NUT: 1000mm hose FLX40, FLX40P: 15mm pushfit x ½” captive nut - 1000mm hose FLX42, FLX42P: 15mm pushfit x ¾” captive nut - 1000mm hose FLX41, FLX41P: 22mm pushfit x ¾” captive nut - 1000mm hose SPEEDFIT X UNION NUT WITH SERVICE VALVE FLX37, FLX37P, FLX37P-SB: 15mm pushfit x ½” captive nut - 300mm hose – Service Valve, FLX39, FLX39P: 22mm pushfit x ¾” captive nut - 300mm hose – Service Valve, FLX37-H: 15mm pushfit x ½” captive nut - 300mm hose – Service Valve and handle FLX39-H: 22mm pushfit x ¾” captive nut - 300mm hose – Service Valve and handle, SPEEDFIT X UNION NUT WITH SERVICE VALVE W/ METAL CONNECTIONS 300mm hose FLX24, FLX24P, FLX24P-SB: 15mm pushfit x ½” captive nut - 300mm – Service Valve FLX25, FLX25P: 22mm pushfit x ¾” captive nut - 300mm – Service Valve.   SPEEDFIT X UNION NUT WITH SERVICE VALVE W/ METAL CONNECTIONS 500mm hose FLX31, FLX31P: 15mm pushfit x ½” captive nut - 500mm – Service Valve, FLX38, FLX38P: 15mm pushfit x ¾” captive nut - 500mm – Service Valve, SPEEDFIT X SPEEDFIT- 300mm hose FLX33P: 10mm pushfit x 15mm pushfit - 300mm hose FLX17, FLX17P, FLX17P-SB: 15mm pushfit x 15mm pushfit - 300mm hose FLX26, FLX26P: 22mm pushfit - 22mm pushfit - 300mm hose SPEEDFIT X SPEEDFIT- 500mm hose FLX21, FLX21P FLX21P-SB: 15mm pushfit x 15mm pushfit - 500mm hose FLX27, FLX27P: 22mm pushfit - 22mm pushfit - 500mm hose SPEEDFIT X SPEEDFIT- 1000mm hose FLX47: 15mm pushfit x 15mm pushfit - 1000mm hose SPEEDFIT X SPEEDFIT WITH SERVICE VALVE – 300mm hose FLX44, FLX44P: 15mm pushfit x 15mm pushfit - 300mm hose – Service Valve SPEEDFIT X SPEEDFIT WITH SERVICE VALVE – 500mm hose FLX45, FLX45P: 15mm pushfit x15mm pushfit - 500mm hose – Service Valve SPEEDFIT X MALE FLX49: 15mm pushfit x ⅜” captive nut - 300mm hose SPEEDFIT X PLAIN STEM FLX53: 15mm pushfit x 15mm tube stem - 300mm hose ELBOW PATTERN FLX36, FLX36P, FLX36P-SB: 15mm pushfit x ½” captive nut (elbow) - 300mm hose, FOR MONOBLOC MIXERS-300mm hose FLX48: 12mm pushfit x M10 male thread - Monobloc Kit -300mm hose FLX28: 15mm pushfit x M10 male thread - Monobloc Kit -300mm hose FLX29, FLX29-SB: 15mm pushfit x M12 male thread - Monobloc Kit-300mm hose Pre-packaged models have a ‘P’ suffix, e.g. WFLX15P.

Product Images

Approval Holder:

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Address

HORTON ROAD WEST DRAYTON

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103348

Size:

SEE MODEL

Marking:

Justlink (tradename of manufacturer), WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

HOSE202002 1/2” FBSP x 1/2” FBSP x 430mm FLEXIBLE HOSE HOSE202106A 3/4” MBSP X 3/4” FBSP X 1000mm FLEXIBLE HOSE HOSE202109 3/4” MBSP X 3/4” FBSP X 500mm FLEXIBLE HOSE

Approval Holder:

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Address

HORTON ROAD WEST DRAYTON

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road Yuhuan Economic Development Zone Yuhuan

Postcode

317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company