Range of inline or angled servicing valves incorporating a white (-W and -01 suffix models) or grey (all other models) plastic body, chrome plated brass ball, EPDM washers and EPDM ‘O’-rings. The products are either lever operated (-H and -01 suffix models) or screwdriver operated (all other models). Push fit connections are for use with copper pipe (manufactured to EN 1057), John Guest BPEX pipe or PEX barrier pipe (manufactured to BS EN 7291-3) and John Guest BPB or polybutylene barrier pipe (manufactured to BS EN 7291-2). Maximum working pressure and operating temperature: 13.24 bar @ 20°C, 6.0 bar @ 65°C.

Section:

2270 Valves

Section Subtitle:

Spherical valve(s) with plastic body.

WRAS Approval Number:

240502059

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

R008 applies to the white models. The John Guest BPEX and BPB pipe are not covered under the scope of this approval.

Size:

Models with a tap connector: 15mm push fit x ½” captive nut. All other models: 15mm push fit or 22mm push fit.

Marking:

John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd), maximum temperature and size on body.

Installation Requirements:

R001 R008

Expiry date:

31/05/2029

Model:

SERVICE VALVES: 15SV-H: 15mm. 22SV-H: 22mm. 15SV: 15mm. 22SV: 22mm. SERVICE VALVES WITH TAP CONNECTOR: 15SVSTC: 15mm x 1/2 bsp. 15SVSTC-W: 15mm x 1/2 bsp (WHITE). 15SVSTC-01: 15mm x 1/2 bsp (WHITE). ANGLED SERVICE VALVES WITH TAP CONNECTOR: 15SVBTC: 15mm x 1/2 bsp. 15SVBTC-W: 15mm x 1/2 bsp (WHITE). 15SVBTC-01: 15mm x 1/2 bsp (WHITE).

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of flanged gate valves with blue epoxy coated ductile iron bodies and EPDM O-rings and disc. The valves are operated via a non-rising spindle headwork with a wheel type operating member. Maximum working pressure 16.0 Bar

Non-metallic materials and components comply with BS6920 at 80°C

Section:

2290 Valves

Section Subtitle:

Gate type stop valve(s) with metal body.

WRAS Approval Number:

2310155

Size:

DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300

Marking:

Hattersley, DN, PN & GGG50 on body. Hattersley, Model, date of manufacture YYYY & technical information on metal dataplate on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

FIG 589 HW DN50 – DN300 (Handwheel) & Fig 589 SA DN50 – DN300 (Stem Adaptor)

Approval Holder:

Hattersley

Company Name

Hattersley

Address

11-15 Epsilon Terrace West Road Ipswich Suffolk

Postcode

IP3 9FJ

Country

United Kingdom

Phone

0766465023

General Email

tturner@cranebsu.com

View All Listings by this Company

Range of angled valves with brass bodies (some models chrome plated). Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:

2310 Valves

Section Subtitle:

Screw down type stop valve(s) with metal body.

WRAS Approval Number:

240504020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Schell moulded on to Valve Body

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

05 112 - ½” BSP (M) x ⅜” BSP (M) 05 252 - ½” BSP (M) x 10mm compression 05 377 - ½” BSP (M) x ½” BSP (M) 05 257 - ½” BSP (M) x ⅜” BSP (M) 05 396 - ½” BSP (M) x ½” BSP (M) 05 398 - ½” BSP (M) x ½” BSP (M) 05 399 - ½” BSP (M) x ½” BSP (M) 05 414 - ½” BSP (M) x ⅜” BSP (M) 05 415 - ½” BSP (M) x ⅜” BSP (M) 05 419 - ½” BSP (M) x ½” BSP (M) Models added January 2025: 05 212 - ½” BSP (M) x ⅜” BSP (M) 05 217 - ½” BSP (M) x ½” BSP (M) 05 430 - ½” BSP (M) x ⅜” BSP (M) with filter

Approval Holder:

Schell GmbH & Co KG Armaturentechnologie

Company Name

Schell GmbH & Co KG Armaturentechnologie

Address

Raiffeisenstrasse 31 Olpe

Postcode

D-57462

Country

Germany

Phone

+492761892294

General Email

info@schell.eu

View All Listings by this Company

Manufacturer:

Schell GmbH & Co KG Armaturentechnologie

Company Name

Schell GmbH & Co KG Armaturentechnologie

Address

Raiffeisenstrasse 31 Olpe

Postcode

D-57462

Country

Germany

Phone

+492761892294

General Email

info@schell.eu

View All Listings by this Company

‘Satefy group’ with a brass inlet and a DZR brass body which incorporates a lever operated spherical valve, followed by an approved check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and a plastic bodied pressure relief valve (set at 6.0 bar). The product incorporates a test point. The compression connections are for use copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2345 Unvented systemes

Section Subtitle:

Inlet Control Group(s) consisting of pressure reducing valve and pressure relief valve. The product also incorporates a single check valve assembly providing Fluid Category 2 protection. Verified by test.

WRAS Approval Number:

241204702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression

Marking:

Caleffi logo, DN15, CR mark and flow arrow cast on body. Date of manufacture WW/YY printed on body. Caleffi and Caleffi logo, flow arrow, CE marking on pressure relief valve body. 6 bar, size, EN1491 and other technical information on pressure relief valve operating gear

Installation Requirements:

R001 R008 R120

Expiry date:

31/12/2029

Model:

528716

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

‘Ballorex’ range of regulating valves with DZR brass bodies, PTFE seats, EPDM ‘O’-rings and washer. The product incorporates two test ports. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

241002002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Claims made by the manufacturer for flow rate have not been tested and are not considered part of the approval listing.

Marking:

Ballorex Venturi, size and pressure on handle. Size, DR, pressure and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

900S ProFlow Venturi FODRV range: 15008 (1/2" UL Commissioning valve): ½" BSPP (F)x(F), 15006 (1/2" SL Commissioning valve): ½" BSPP (F)x(F), 15000 (1/2" SS Commissioning valve): ½" BSPP (F)x(F), 16404 (1/2” SH Commissioning valve): ½" BSPP (F)x(F), 15007 (3/4" SL Commissioning valve): ¾ BSPP (F)x(F), 15001 (3/4" SS Commissioning valve): ¾ BSPP (F)x(F), 16405 (3/4" SH Commissioning valve): ¾ BSPP (F)x(F), 15002 (1" SS Commissioning valve): 1" BSPP (F)x(F), 15181 (1" SH Commissioning valve): 1" BSPP (F)x(F), 15003 (1.1/4" SH Commissioning valve): 1¼" BSPP (F)x(F), 15004 (1.1/2" SH Commissioning valve): 1½" BSPP (F)x(F), 15005 (2" SH Commissioning valve): 2" BSPP (F)x(F). Where: UL = ultra low flow, SL = low flow, SS = standard flow, SH = high flow.

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company