Combination Tap Assemblies

Section Code 0470 : Single hole tap(s) with a single outlet and a swivel spout.

Back To Directory Sections

#241113016

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The pull-out spout outlet incorporates a plastic aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
241113016
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX line flexible hose assemblies with ½” captive nut end connections.
Marking:
Leisure on operating member
Installation Requirements:
R001 R009 R090
Expiry date:
30/11/2029
Model:
Aquazest single lever

Approval Holder:
AGA Rangemaster Leisure Limited
Company Name
AGA Rangemaster Leisure Limited
Address
Meadow Lane, Long Eaton, Nottingham
Postcode
NG10 2GD

View All Listings by this Company

Print This Approval


#241113012

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
241113012
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX line flexible hose assemblies with ½” captive nut end connections.
Marking:
Leisure on body.
Installation Requirements:
R001 R009 R010 R006
Expiry date:
31/10/2029
Model:
Aquafocus Aquanomic Aquaform Aquanomic

Approval Holder:
AGA Rangemaster Leisure Limited
Company Name
AGA Rangemaster Leisure Limited
Address
Meadow Lane, Long Eaton, Nottingham
Postcode
NG10 2GD

View All Listings by this Company

Print This Approval


#241113015

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
241113015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided EPDM lined flexible hose assemblies with 3/8” or ½” captive nut end connections.
Marking:
Leisure on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2029
Model:
Aquarise single lever Aquacrest single lever Aquaforte single lever Aquanova single lever Aquapulse single lever

Approval Holder:
AGA Rangemaster Leisure Limited
Company Name
AGA Rangemaster Leisure Limited
Address
Meadow Lane, Long Eaton, Nottingham
Postcode
NG10 2GD

View All Listings by this Company

Print This Approval


#241113017

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The cold only inlet hoses incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
241113017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided EPDM line flexible hose assemblies with ½” captive nut end connections.
Marking:
Franke on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2029
Model:
ASCONA J ASCONA U ASCONA CLASSIC

Approval Holder:
Franke UK Ltd.
Company Name
Franke UK Ltd.
Address
West Park, MIOC, Styal Road, Manchester
Postcode
M22 5WB
Country
United Kingdom
Phone
0161 4360280

View All Listings by this Company

Print This Approval


#241203016

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
241203016
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Range of stainless steel braided EPDM or PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections
Marking:
‘ESTEEM’ on Tap Body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2029
Model:
E60107

Approval Holder:
UK Plumbing Supplies Ltd
Company Name
UK Plumbing Supplies Ltd
Address
Quayside 2A Wilderspool Park Greenalls Avenue Cheshire
Postcode
WA4 6HL

View All Listings by this Company

Print This Approval


#2204925

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2204925
Size:
Stainless steel braided EPDM lined flexible hoses with ½” BSP (F) captive nut end connections.
Marking:
‘INFINITA’ on tap body
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2027
Model:
INF-COR-001

Approval Holder:
FORTIS MERCHANTS LTD
Company Name
FORTIS MERCHANTS LTD
Address
SUSSEX HOUSE QUARRY LANE
Postcode
PO19 8PE

View All Listings by this Company

Print This Approval


#241203017

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
241203017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Range of stainless steel braided EPDM or PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections
Marking:
‘INFINITA’ on tap body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2029
Model:
INF-VID-001

Approval Holder:
FORTIS MERCHANTS LTD
Company Name
FORTIS MERCHANTS LTD
Address
SUSSEX HOUSE QUARRY LANE
Postcode
PO19 8PE

View All Listings by this Company

Print This Approval


#2009912

Range of single hole, single outlet (swivel) combination tap assemblies (Chromium plated or brushed nickel finish), incorporating quarter turn ceramic disk headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Supplied with approved single check valves, verified by test (suitable for backflow protection against Fluid Category 2) with integral servicing valve for both inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2009912
Size:
Stainless steel braided EPDM lined hose assemblies with ½” BSP captive nut end connections/15mm compression
Marking:
Bristan logo on tap body
Installation Requirements:
FR001 R006 R010
Expiry date:
30/09/2025
Model:
RP3 ST SNK EF C

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#2012937

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass), incorporating quarter turn ceramic disc headwork. The spout outlet incorporates a plastic flow straightener and the product is supplied with single check valve assemblies (verified by test as suitable for backflow protection against Fluid Category 2) with integral servicing valve for both inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2012937
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Bristan Easifit on body
Installation Requirements:
R001 R006 R010
Expiry date:
31/12/2025
Model:
RP3 MZ SNK EF C

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#241103017

Single hole, single outlet (swivel) combination tap assemblies (chrome plated brass body), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Inlets incorporate isolation valves that incorporate single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate it provides backflow protection. Maximum static pressure 5 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
241103017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections with 15mm compressions spherical valves.
Marking:
BRISTAN on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2029
Model:
RP3 BLB EFSNK C

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 50 of 51

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.