'Instantor® Pex'. Translucent, white coloured, extruded, single-layered PE-Xb tubing. For use with water up to 85°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2203505

Expiry date:

31/03/2027

Approval Holder:

Sanbra Fyffe

Company Name

Sanbra Fyffe

Address

Santry Avenue, Santry, Dublin, D09 K160

View All Listings by this Company

Instantor Metric Copper Press Range crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404051

Size:

see models

Marking:

Sanbra Fyfe logo (S inside circle) & size etched on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Straight Coupling CxC CP410001 15 CP410002 22 CP410003 28 CP410004 35 CP410005 42 CP410006 54 CP410007 66.7 CP410008 76.1 CP410009 108 Slip Coupling CxC CP4100S1 15 CP4100S2 22 CP4100S3 28 CP4100S4 35 CP4100S5 42 CP4100S6 54 CP4100S7 66.7 CP4100S8 76.1 CP4100S9 108 Fitting Reducer FxC CP419021 22x15 CP419031 28x15 CP419032 28x22 CP419041 35x15 CP419042 35x22 CP419043 35x28 CP419051 42x15 CP419052 42x22 CP419053 42x28 CP419054 42x35 CP419061 54x15 CP419062 54x22 CP419063 54x28 CP419064 54x35 CP419065 54x42 Reducing Coupler CxC CP410021 22x15 CP400031 28x15 CP400032 28x22 CP410041 35x15 CP410042 35x22 CP410043 35x28 CP410051 42x15 CP410052 42x22 CP410053 42x28 CP410054 42x35 CP410061 54x15 CP410062 54x22 CP410063 54x28 CP410064 54x35 CP410065 54x42 CP410066 66.7X54 CP410067 76.1X54 CP410068 108x54 90Deg Elbow CxC CP415001 15 CP415002 22 CO415003 28 CP415004 35 CP415005 42 CP415006 54 CP415007 66.7 CP415008 76.1 CP415009 108 90Deg Steet Elbow FxC CP435001 15 CP435002 22 CP435003 28 CP435004 35 CP435005 42 CP435006 54 CP435007 66.7 CP435008 76.1 CP435009 108 45Deg Elbow CxC CP445001 15 CP445002 22 CP445003 28 CP445004 35 CP445005 42 CP445006 54 CP445007 66.7 CP445008 76.1 CP445009 108 45Deg Street Elbow FxC CP425001 15 CP425002 22 CP425003 28 CP425004 35 CP425005 42 CP425006 54 CP425007 66.7 CP425008 76.1 CP425009 108 Cap CxC CP451001 15 CP451002 22 CP451003 28 CP451004 35 CP451005 42 CP415006 54 CP415007 66.7 CP415008 76.1 CP415009 108 Reducer Elbow CP415021 22x15 CP415031 28x15 CP415032 28x22 Part Crossover CxC CP410011 15 CP410012 22 Crossover CxC CP410014 15 CP410015 22 Equal Tee CxC CP418001 15 CP418002 22 CP418003 28 CP418004 35 CP418005 42 CP418006 54 CP418007 66.7 CP418008 76.1 CP418009 108 Reducing Tee CP418211 22x15x15 CP418212 22x15x22 CP418322 28x22x22 CP418323 28x22x28 CP418321 28x22x15 CP418313 28x15x28 CP418558 35x22x22 CP418557 35x22x35 CP418556 35x28x35 CP418555 42x35x35 CP418112 15x15x22 CP418223 22x22x28 CP418221 22x22x15 CP418331 28x28x15 CP418332 28x28x22 CP418441 35x35x15 CP418442 35x35x22 CP418443 35x35x28 CP418551 42x42x15 CP418552 42x42x22 CP418553 42x42x28 CP418554 42x42x35 CP418661 54x54x15 CP418662 54x54x22 CP418663 54x54x28 CP418664 54x54x35 CP418665 54x54x42

Approval Holder:

Sanbra Fyffe

Company Name

Sanbra Fyffe

Address

Santry Avenue, Santry, Dublin, D09 K160

View All Listings by this Company

Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies. Each inlet incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression connections are for use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2310167

Size:

See model.

Marking:

Sanbra Fyffe, Model & technical information on operating member. CR and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

770972 (14.7MM COMPRESSION), 770973 (21MM COMPRESSION), 770970 (15MM COMPRESSION), 770971 (22MM COMPRESSION), THERMOSTATIC BLENDING VALVES

Approval Holder:

Sanbra Fyffe

Company Name

Sanbra Fyffe

Address

Santry Avenue, Santry, Dublin, D09 K160

View All Listings by this Company