Directory Search Results

Print List

#2205701

Range of shower outlets incorporating brass bodies (various finishes) and NBR ‘O’-rings. Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2205701
Note:
Open outlet use only
Size:
⅜”, ½” and ¾” BSP (F) (all models)
Marking:
MBL on body
Installation Requirements:
R001 R040
Expiry date:
31/05/2027
Model:
Victorian Skirted shower rose: VS65, VS75, VS100, VS125, VS150, VS200, VS300 Victorian skirted easy clean rose: VSEC65, VSEC75, VSEC150, VSEC200, VSEC300 Modern Rose: M75, M150, M200, M300 Modern easy clean rose: MEC65, MEC75, MEC150, MEC200, MEC300 Modern slimline easy clean rose: 75SMEC, 300SMEC Victorian flat front rose: VFF150, VFF200 Slim easy clean rose: SEC200 Models available with a suffix to denote the finish, for example: P = Polished, C = Chroma, G = Gold, N = Nickel

Approval Holder:
Marston Brassware Ltd.
Company Name
Marston Brassware Ltd.
Address
Chancel Indus Est, Hickman Avenue, Wolverhampton.
Postcode
WV1 2UH
Country
United Kingdom
Phone
01902 352 425
General Email
info@marstonbrassware.com

View All Listings by this Company
Manufacturer:
Marston Brassware Ltd.
Company Name
Marston Brassware Ltd.
Address
Chancel Indus Est, Hickman Avenue, Wolverhampton.
Postcode
WV1 2UH
Country
United Kingdom
Phone
01902 352 425
General Email
info@marstonbrassware.com

View All Listings by this Company

Print This Approval


#2201324

Range of shower outlets and shower kits. Shower outlets consisting of wall and ceiling mounted shower heads and hand shower. The inlets incorporate stainless steel flow regulators and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower kits can consist of shower hose, shower handset, riser rail and wall outlet elbow with bracket (depending on model). Shower handset inlet incorporates a stainless-steel strainer. Both the outlet of the wall elbow and inlet of shower handset incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2201324
Note:
Open outlet use only. R007 only applies to model 65127
Size:
See model
Marking:
Gessi on inlet (models 65142, 65123) Gessi on operating member (model 65144) Gessi on shower head (model 65154) Gessi on shower holder (model 65127) Gessi on base plate (models 65148, 65149, 65150, 65152, 65153, 65155)
Installation Requirements:
R001 R007 R040
Expiry date:
31/01/2027
Model:
½” BSP (M): 65123 - shower set 65142 - sliding rail with handshower 65148 - Wall mounted overhead shower 65149 - Wall mounted overhead shower 65150 - Overhead shower 65152 - Overhead shower 65153 - Overhead shower 65154 - Handshower 65155 - Overhead shower ½” Captive nut 65144 - Complete set with sliding rail 65127 – Deck mounted handshower kit
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2110369

‘Concept’ & ‘Advance’ ranges of atmospheric steaming ovens. The products incorporate a retractable triple layered hose on a reel and a push-button operated shower handset. The inlet of the shower handset incorporates a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection The water supply is controlled via a solenoid valve. The retractable hose has its own dedicated supply also controlled via a solenoid valve. The products are supplied with dual layer supply hoses (grey PVC outer layer/black PVC inner layer) with ¾” captive nut end connections, and chrome plated DZR brass ½” BSP (F) x ¾” BSP (M) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet. Maximum working pressure 4.0 bar. Cold supply only.

Section:
1690 Steaming Ovens
WRAS Approval Number:
2110369
Note:
Cleaning chemicals and detergents used in the automatic spray washing function must not represent a Fluid Category risk higher than Fluid Category 3. The Fluid Category of risk associated with the retractable hose and self-closing trigger supplied with this appliance can only be determine by the Water Regulations/Byelaws (Scotland) department of the local Water Supplier in the area of installation, which will require a site specific risk assessment. Under Regulation/Byelaw 3 and schedule 2 paragraph 15, the installer must ensure sufficient backflow protection is provided in line with the findings of the risk assessment. R008 applies to the solenoid inlet.
Size:
¾” BSP (M) (to solenoid)
Marking:
Fagor, Serial No., Model No., Ref No., manufacturing date (MM/YY) and other technical information on top panel. Fagor on front casing. Range name on front panel.
Installation Requirements:
R001 R008 R009 R160
Expiry date:
31/10/2026
Proviso:
Discharge to drain must be via a Type AA, AB or AD air gap or in accordance with EN 1717.
Model:
‘Concept’ & ‘Advance’ range: C-061-E-D, C-061-E-I, CW-061-E-D, CW-061-E-I, A-061-E-D, A-061-E-I, AW-061-E-D, AW-061-E-I, C-101-E-D, C-101-E-I, CW-101-E-I, CW-101-E-D, A-101-E-D, A-101-E-I, AW-101-E-D, AW-101-E-I, C-102-E-D, C-102-E-I, CW-102-E-D, CW-102-E-I, A-102-E-D, A-102-E-I, AW-102-E-D, AW-102-E-I, C-201-E, C-201-E-C, CW-201-E, CW-201-E-C, A-201-E, A-201-E-C, AW-201-E, AW-201-E-C, C-202-E, C-202-E-C, CW-202-E, CW-202-E-C, A-202-E, A-202-E-C, AW-202-E, AW-202-E-C, C-0623-E-D, CW-0623-E-D, A-0623-E-D, AW-0623-E-D, C-061-G-D, C-061-G-I, CW-061-G-D, CW-061-G-I, A-061-G-D, A-061-G-I, AW-061-G-D, AW-061-G-I, C-101-G-D, C-101-G-I, CW-101-G-D, CW-101-G-I, A-101-G-D, A-101-G-I, AW-101-G-D, AW-101-G-I, C-102-G-D, C-102-G-I, CW-102-G-D, CW-102-G-I, A-102-G-D, A-102-G-I, AW-102-G-D, AW-102-G-I, C-201-G, C-201-G-C, CW-201-G, CW-201-G-C, A-201-G, A-201-G-C, AW-201-G, AW-201-G-C, C-202-G, C-202-G-C, CW-202-G, CW-202-G-C, A-202-G, A-202-G-C, AW-202-G, AW-202-G-C, Where: C prefix = Concept models. A prefix = Advance models. E = Electric oven. G = Gas oven. W = Oven with automatic washing system. Numbers denote the capacity of the oven: 0623: 6 trays GN-2/3. 061: 6 trays GN-1/1 - 12 trays GN-1/2. 101: 10 trays GN-1/1 - 20 trays GN-1/2. 102: 10 trays GN-2/1 - 20 trays GN-1/1. 201: 20 trays GN-1/1 - 40 trays GN-1/2. 202: 20 trays GN-2/1 - 40 trays GN-1/1. I = Left door opening. R = Right door opening. C = Model with trolley.
Product Images

Approval Holder:
Fagor Industrial S Coop.
Company Name
Fagor Industrial S Coop.
Address
Barrio Sancholopetegui 22 20560 - Oñati
Country
Spain
Phone
+34 943 71 80 30
General Email
info@fagorindustrial.com

View All Listings by this Company
Manufacturer:
Fagor Industrial S Coop.
Company Name
Fagor Industrial S Coop.
Address
Barrio Sancholopetegui 22 20560 - Oñati
Country
Spain
Phone
+34 943 71 80 30
General Email
info@fagorindustrial.com

View All Listings by this Company

Print This Approval


#2111058

Range of Y type strainers with blue epoxy coated ductile iron bodies and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

Section:
1715 Strainers
Size:
DN50 up DN400 flanged inlet and outlet
Marking:
NIBCO, MODEL, DI & PN ON METAL DATAPLATE ON BODY NIBCO, DN, PN, DI & FLOW ARROW ON BODY
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
NPF1000EPW (PN16) & NPF1025EPW (PN25) SERIES STRAINERS
Product Images

Approval Holder:
NIBCO Inc
Company Name
NIBCO Inc
Address
1516 Middlebury Street Elkhart IN 46516
Country
USA

View All Listings by this Company

Print This Approval


#2201320

Range of flow switches with brass bodies and NBR/fibre gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1718 Switches
Section Subtitle:
Flow control.
WRAS Approval Number:
2201320
Size:
see model
Marking:
Caleffi logo on body. Date of manufacture (WW/YY) and flow arrow on cap.
Installation Requirements:
R001
Expiry date:
31/01/2027
Model:
315400 - ½” BSP (M) x ½” BSP (M). 315405 CST - ½” BSP (M) x ½” BSP (M). 315500 - ¾” BSP (M) x ¾” BSP (M).
Product Images

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 483 of 2309

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.