Range of electromagnetic water meters with blue epoxy coated aluminium bodies and a natural rubber liner. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1505 Water Meters

Size:

See model.

Marking:

Gflow logo, model, size, year of manufacture (YYYY) and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

NautiFlow NF1 series: NautiFlow NF1-112: DN40, NautiFlow NF1-002: DN50, NautiFlow NF1-212: DN65, NautiFlow NF1-003: DN80, NautiFlow NF1-004: DN100, NautiFlow NF1-005: DN125, NautiFlow NF1-006: DN150, NautiFlow NF1-008: DN200, NautiFlow NF1-010: DN250, NautiFlow NF1-012: DN300.

Approval Holder:

Gflow Instruments

Company Name

Gflow Instruments

Address

Flat D, 7/F, Harvard Comm Bldg. 105-111 Thomson Road, Wanchai, Hong Kong SAR

View All Listings by this Company

Manufacturer:

Gflow Instruments

Company Name

Gflow Instruments

Address

Flat D, 7/F, Harvard Comm Bldg. 105-111 Thomson Road, Wanchai, Hong Kong SAR

View All Listings by this Company

Pentobox range of water meter manifolds with plastic bodies and an integral spherical valve on the inlet. The models incorporate a non-return valve, (not suitable for backflow protection). Compression models are for use with metric and imperial PE80 pipe (manufactured to BS EN 12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Size:

Please refer to model.

Marking:

AVK logo and date stamp on cover. Flow arrow on meter box body. Date stamp and size on manifold. (Date stamps = two clocks, one for month, the other for year).

Installation Requirements:

R001 R008

Expiry date:

31/10/2028

Model:

8054125521110301000: 25mm compression. 8054132521110301000: 32mm compression. 8054121521110301000: ½" compression. 8054326521110301000: ¾" BSP (F). 8054125521110331000: 25mm compression. 8054132521110331000: 32mm compression. 8054121521110331000: ½" compression. 8054326521110331000: ¾" BSP (F).

Approval Holder:

AVK UK Ltd.

Company Name

AVK UK Ltd.

Address

8 Rushmills, Northampton

Postcode

NN4 7YB

Country

United Kingdom

Phone

01246479100

General Email

chle@avkuk.co.uk

View All Listings by this Company

Range of (below ground) water meter manifolds (gunmetal bodies), meter carriers (DZR brass bodies) and stopcock carriers (gunmetal bodies). All meter carriers incorporate a non-return valve. All manifold ports and the stopcock carriers incorporate a non-rising spindle stopcock with a T shaped operating member. Maximum working pressure: 16.0°C Cold water use only.

Section:

1510 Water Meter Manifolds

Size:

1/2" BSP (M) x 1.1/2" BSP (M) union adaptor, 1.1/2" BSP (F) manifold & ¾” BSP (F) carriers.

Marking:

Waterfit, WF logo & size on union nut. WF and flow arrow on meter carrier and stopcock carrier. CR Mark on DZR caps.

Installation Requirements:

R001 R008

Expiry date:

31/10/2028

Model:

MAI275002587 (2 Port Manifold) MAl375002588 (3 Port Manifold) MAl475000380 (4 Port Manifold) MAl575000381 (5 Port Manifold) MAI675000382 (6 Port Manifold) MAl775000383 (7 Port Manifold) MAl875000384 (8 Port Manifold) MAl975000959 (9 Port Manifold) MAI075002185 (10 Port Manifold) MAI175002186 (11 Port Manifold) MAI275002542 (12 Port Manifold) MAI375002543 (13 Port Manifold) MAl475002510 (14 Port Manifold) MAI375004576 (12+1 Port Manifold) MAl475004577 (12+2 Port Manifold) MAI775004574 (6+1 Port Manifold) MAl875004575 (6+2 Port Manifold) MAl475004585 (13+1 Port Manifold) CAI075000031 (Meter carrier) CAI075000040 (Stopcock carrier)

Approval Holder:

Waterfit Ltd

Company Name

Waterfit Ltd

Address

PO Box 28 293 Birmingham New Road Dudley

Postcode

DY1 4SJ

Country

West Midlands

Phone

0121 5207987

General Email

enquiries@waterfit.co.uk

View All Listings by this Company

Range of multistage centrifugal pumps, with stainless steel bodies (CRN models) or black coloured cataphoretic electrodeposition coated cast iron bodies (CR models), stainless steel sleeve and impellers. The products can be supplied with or without a sensor. Maximum working pressures (no. of stages in brackets): CR/CRN 95 (1-5): 16.0 bar. CR/CRN 95 (6-8): 25.0 bar. CRN 95 (9-12): 40.0 bar. CR/CRN 125 (1-4): 16.0 bar. CR 125 (5): 25.0 bar. CRN 125 (6-7): 25.0 bar. CRN 125 (8-12): 40.0 bar. CR 155 (1-4): 16.0 bar. CRN 155 (1-4): 16.0 bar. CRN 155 (5-6): 25.0 bar. CRN 155 (7-11): 40.0 bar. CR/CRN 185 (1-3): 16.0 bar. CR/CRN 185 (4-5): 25.0 bar. CR/CRN 185 (6-8): 40.0 bar. CR/CRN 215 (1-3): 16.0 bar. CR/CRN 215 (4-5): 25.0 bar. CR/CRN 215 (6-7): 40.0 bar. CR/CRN 255 (1-3): 16.0 bar. CR/CRN 255 (3-4): 25.0 bar. CR/CRN 255 (5-6): 40.0 bar. When a sensor is incorporated the maximum working pressure is as follows: 25.0 bar with either the IPS44 or VTU sensor, (unless they are used on a pump with a maximum working pressure of 16.0 bar, in this instance the lesser pressure applies). The MBS3000 sensor can be used on all models, the pump maximum working pressure applies. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2310916

Size:

CR/CRN(E) 95 models: DN100 inlets/outlets, CR/CRN(E) 125 & CR/CRN(E) 155 models: DN150 inlets/outlets, CR/CRN(E) 185, CR/CRN(E) 215 & CR/CRN(E) 255 models: DN200 inlets/outlets. CRN(E) 95 models: PJE 4” inlets/outlets, CRN(E) 125 & CRN(E) 155 models: PJE 6” inlets/outlets, CRN(E) 185, CRN(E) 215 & CRN(E) 255 models: PJE 8” inlets/outlets.

Marking:

Grundfos logo, type, model, Prod/Ver no., technical info and manufacturing/assembly country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

31/10/2028

Model:

Model key code: CR/CRN (E) AA-B-C-D-E-F-G-XXXX Where: CR = Pump type and Cast Iron. CRN = Pump type and EN 1.4401. E = Preminum Electronically Controlled Motor (CR /CRN 95 -125 models only). AA: Flow rate [m³/h] - 95 / 125 / 155 / 185 / 215 / 255. B: Number of impellers – dependent on model (1-12). C: Number of reduced diameter impellers - 0 / 1 / 2 / 3 / 4. D: Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, T = Trust handling device, V = Cascade function, X = Special version*, Z = Pump with bearing flange. E: Code for pipe connection: F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (CRN models only). F: Code for materials: A = Basic version, C = Carbon-free pump, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, P = PEEK neck ring, Q = Silicon carbide/silicon carbide bearing in pump and silicon carbide/silicon carbide seal faces in thrust handling device, R = Silicone carbide /silicone carbide bearing, T = Baseplate EN 1.4408, U = Silicon carbide/silicon carbide bearing in pump and silicon carbide/tungsten carbide seal faces in thrust handling device, W = Tungsten carbide/tungsten carbide, X = Special*. G: Code for rubber parts: E = EPDM, V = FKM. XXXX: Code for shaft seal: HQQx, HUUx, HUBx, HQBx. Where: H = Balanced cartridge seal with O-ring B = Carbon, synthetic resin-impregnated U = Cemented tungsten carbide Q = Silicon carbide x can = E or V for rubber parts: E = EPDM, V = FKM. *Special version ONLY covers the situation where more than 4 options are selected within the same position.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of vertical multistage pumps with either stainless-steel bodies or cast-iron bodies with a black epoxy powder coating, stainless-steel impellers, shaft and outer sleeve, EPDM ‘O’-rings and a silicon carbide + EPDM shaft seal. Maximum working pressure 25.0 bar. Maximum operating temperature 90°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2311069

Size:

DN25 -100.

Marking:

Capari logo on metal cover plate on side of body. Flow arrow on body. Type, model, pressure and other information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2028

Model:

CVX AAB/CC-D/E Series: CVX. AA: Pump model size representing flow rate (m³/h) - 03, 05, 10, 15, 20, 32, 45, 64, 90. B: Pump generational code - 1. CC: No. of stages (model dependent - see below). D: Frequency - V = 50Hz or W = 50/60Hz. /G = cast iron base (CVX451/641/901 models only). Stainless steel bodies: CVX031: 5 -36 stages. 691472 - CVX031/5-V (DN25), 691473 - CVX031/7-V (DN25), 691474 - CVX031/10-V (DN25), 691475 - CVX031/15-V (DN25), 691476 - CVX031/19-V (DN25), 691477 - CVX031/23-V (DN25), 691478 - CVX031/29-V (DN25), 691479 - CVX031/33-V (DN25), 691480 - CVX031/36-V (DN25). CVX051: 4-36 stages. 691482 - CVX051/4-V (DN25), 691483 - CVX051/5-V (DN25), 691484 - CVX051/8-V (DN25), 691485 - CVX051/10-V (DN25), 691486 - CVX051/13-V (DN25), 691487 - CVX051/16-V (DN25), 691488 - CVX051/20-V (DN25), 691489 - CVX051/24-V (DN25), 691490 - CVX051/29-V (DN25), 691491 - CVX051/36-V (DN25). CVX101: 3-22 stages. 691493 - CVX101/3-V (DN40), 691494 - CVX101/4-V (DN40), 691495 - CVX101/6-V (DN40), 691496 - CVX101/9-V (DN40), 691497 - CVX101/12-V (DN40), 691498 - CVX101/16-V (DN40), 691499 - CVX101/22-V (DN40). CVX151: 2-17 stages. 691501 - CVX151/2-V (DN50), 691502 - CVX151/3-V (DN50), 691503 - CVX151/5-V (DN50), 691504 - CVX151/7-V (DN50), 691505 - CVX151/9-V (DN50), 691506 - CVX151/12-W (DN50), 691507 - CVX151/14-V (DN50), 691508 - CVX151/17-V (DN50). CVX201: 2-17 stages. 691510 - CVX201/2-V (DN50), 691511 - CVX201/3-V (DN50), 691512 - CVX201/5-V (DN50), 691513 - CVX201/7-V (DN50), 691514 - CVX201/10-W (DN50), 691515 - CVX201/14-V (DN50), 691516 - CVX201/17-V (DN50). CVX321: 2-14 stages. 691518 - CVX321/2-V (DN65), 691519 - CVX321/3-V (DN65), 691520 - CVX321/4-V (DN65), 691521 - CVX321/6-W (DN65), 691522 - CVX321/8-V (DN65), 691523 - CVX321/10-V (DN65), 691524 - CVX321/12-V (DN65), 691525 - CVX321/14-V (DN65). Cast iron bodies: CVX451: 2-13 stages. 691533 - CVX451/2-V/G (DN80), 691534 - CVX451/3-V/G (DN80), 691535 - CVX451/4-V/G (DN80), 691536 - CVX451/5-2-V/G (DN80), 691537 - CVX451/6-2-V/G (DN80), 691872 - CVX451/6-V/G (DN80), 691538 - CVX451/9-2-V/G (DN80), 691873 - CVX451/10-V/G (DN80), 691874 - CVX451/13-2-V/G (DN80). CVX641: 2-8 stages. 691539 - CVX641/2-V/G (DN100), 691540 - CVX641/3-1-V/G (DN100), 691541 - CVX641/4-V/G (DN100), 691875 - CVX641/4-2-V/G (DN100), 691542 - CVX641/6-2-V/G (DN100), 691543 - CVX641/7-1-V/G (DN100), 691876 - CVX641/8-1-V/G (DN100). CVX901: 2-6 stages. 691544 - CVX901/2-V/G (DN100), 691545 - CVX901/3-V/G (DN100), 691877 - CVX901/3-2-V/G (DN100), 691546 - CVX901/4-V/G (DN100), 691547 - CVX901/5-V/G (DN100), 691878 - CVX901/6-V/G (DN100).

Approval Holder:

Caprari S.p.A

Company Name

Caprari S.p.A

Address

Via Emilia, Ovest 900, 41123 Modena

Country

Italy

View All Listings by this Company