Directory Search Results

Print List

#241104038

Range of wall and deck mounted, fixed or swivel laboratory taps and mixers (powder coated brass) incorporating ceramic disc headworks, non-rising spindle headworks or ceramic cartridge headworks, with lever or dome type operating members. The spout outlets incorporate an aerator, and a hose union connection. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
1795 Taps
Section Subtitle:
Laboratory tap(s).
WRAS Approval Number:
241104038
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
(i) IRN 040 applies to the wall mounted taps, and when the hose union connection is installed. (ii) IRN 090 applies to taps with hose union connection only.
Size:
½” BSP (M)
Marking:
Broen on operating member.
Installation Requirements:
R001 R006 R010 R040 R090
Expiry date:
30/11/2029
Model:
2534 XXX 82 XX-XX X One media water tap 2536 XXX 82 XX-XX X Mixing water tap 2510 XXX 82 XX-XX X Front control valve concept 2511 XXX 82 XX-XX X Front control valve concept and outlets 2533 XXX 82 XX-XX X Column Fittings 6034 XXX 82 XX-XX X Column Fittings 6036 XXX 82 XX-XX X Column Fittings 6033 XXX 82 XX-XX X Column Fittings 6010 XXX 82 XX-XX X Front control 6011 XXX 82 XX-XX X Front control

Manufacturer:
Broen-Lab A/S
Company Name
Broen-Lab A/S
Address
Drejervaengtetr 2 Assens
Postcode
5610
Country
Denmark

View All Listings by this Company

Print This Approval


#240604037

Self-closing combination tap assembly (chromium plated brass) with a spring-loaded headwork controlling both temperature and flow with a dome type operating member. The spout outlet incorporates a plastic flow straightener. The flexible hose inlets incorporate a combined EPDM washer and stainless-steel strainer, as well as an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1820 Taps
Section Subtitle:
Self closing tap(s).
WRAS Approval Number:
240604037
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel or polyamide braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Sanceram on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2029
Model:
SCBW106

Approval Holder:
The Sanitaryware Company
Company Name
The Sanitaryware Company
Address
Montagu Court Kettering Venture Park Kettering Parkway
Postcode
NN15 6XR
Country
Kettering

View All Listings by this Company

Print This Approval


#240902704

Range of unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 6.0 bar at 95˚C and an expansion relief valve set at 4.5 bar. The product is supplied with a safety group consisting of a pressure reducing valve set at 3.0 bar, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection). Also supplied with an expansion vessel and tundish. Maximum working pressures: Secondary circuit: 4.0 Bar Primary Circuit: 3.0 Bar Solar circuit: 6.0 Bar Maximum operating temperature 99.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Secondary circuit: 22mm compression. Primary circuit: 22/28mm compression. Solar coil: 22/28mm compression
Marking:
Gledhill, model name, date of manufacture (DD/MM/YYYY), Capacity, max pressure, max temp and other technical information on label on body of cylinder.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2029
Model:
PLUDR090 PLUDR120 PLUDR150 PLUDR180 PLUDR210 PLUDR250 PLUDR300 PLUDR090SL PLUDR120SL PLUDR150SL PLUDR180SL PLUDR210SL PLUDR180S PLUDR210S PLUDR250S PLUDR300S PLUDR400S PLUDR180SSL PLUDR210SSL PLUIN090 PLUIN120 PLUIN150 PLUIN180 PLUIN210 PLUIN250 PLUIN300 PLUIN400 PLUIN060SL PLUIN090SL PLUIN120SL PLUIN150SL PLUIN180SL PLUIN210SL PLUIN180S PLUIN210S PLUIN250S PLUIN300S PLUIN400S PLUIN180SSL PLUIN210SSL Note: PLU - Plus – Gledhill plus Build Spec PRO - Pro - Gledhill professional build spec DR- Dir – Direct IN - Ind – Indirect HP – Heat pump S - Sol – Solar H - Horiz – Horizontal SH – Solar Horizontal DUO – CYL/BUF – Cylinder and buffer combination PP – Pre Plumb – Pre-plumbed SP- System plus SR -System ready EE – external expansion UV – unvented SL - Slim – Slimline
Product Images

Approval Holder:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company
Manufacturer:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company

Print This Approval


#240902705

Range of unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 6.0 bar at 95˚C and an expansion relief valve set at 4.5 bar. The product is supplied with a safety group consisting of a pressure reducing valve set at 3.0 bar, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also supplied with an expansion vessel and tundish. Maximum working pressures: Secondary circuit: 4.0 Bar Primary Circuit: 3.0 Bar Solar circuit: 6.0 Bar Maximum operating temperature 99.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Secondary circuit: 22mm compression. Primary circuit: 22/28mm compression. Solar coil: 22/28mm compression
Marking:
Gledhill, model name, date of manufacture (DD/MM/YYYY), Capacity, max pressure, max temp and other technical information on label on body of cylinder.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2029
Model:
PLUIN180H PLUIN210H PLUIN250H PLUIN300H PLUIN180SH PLUIN210SH PLUIN250SH PLUIN300SH Note: PLU - Plus – Gledhill plus Build Spec PRO - Pro - Gledhill professional build spec DR- Dir – Direct IN - Ind – Indirect HP – Heat pump S - Sol – Solar H - Horiz – Horizontal SH – Solar Horizontal DUO – CYL/BUF – Cylinder and buffer combination PP – Pre Plumb – Pre-plumbed SP- System plus SR -System ready EE – external expansion UV – unvented SL - Slim – Slimline

Approval Holder:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company
Manufacturer:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company

Print This Approval


#240902706

Range of unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 6.0 bar at 95˚C and an expansion relief valve set at 4.5 bar. The product is supplied with a safety group consisting of a pressure reducing valve set at 3.0 bar, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with an expansion vessel and tundish. Maximum working pressures: Secondary circuit: 4.0 Bar Primary Circuit: 3.0 Bar Solar circuit: 6.0 Bar Maximum operating temperature 99.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Secondary circuit: 22mm compression. Primary circuit: 22/28mm compression. Solar coil: 22/28mm compression
Marking:
Gledhill, model name, date of manufacture (DD/MM/YYYY), Capacity, max pressure, max temp and other technical information on label on body of cylinder.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2029
Model:
PLUHP180 PLUHP210 PLUHP250 PLUHP300 PLUHP400 PLUHP180S PLUHP210S PLUHP250S PLUHP300S PLUHP400S PLUHP180SL PLUHP210SL PLUHP200DUO PLUHP300DUO PLUHP200DUOPP PLUHP300DUOPP Note: PLU - Plus – Gledhill plus Build Spec PRO - Pro - Gledhill professional build spec DR- Dir – Direct IN - Ind – Indirect HP – Heat pump S - Sol – Solar H - Horiz – Horizontal SH – Solar Horizontal DUO – CYL/BUF – Cylinder and buffer combination PP – Pre Plumb – Pre-plumbed SP- System plus SR -System ready EE – external expansion UV – unvented SL - Slim – Slimline

Approval Holder:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company
Manufacturer:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 451 of 559

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.