Directory Search Results

Print List

#240202716

Range of wall mounted combination boilers providing domestic hot water via a plate heat exchanger and pressurised central heating system. The primary circuit incorporates a pressure relief valve set at 3.0 bar and an expansion vessel. The secondary circuit (DHW) incorporates a plastic flow restrictor and stainless-steel filter. The primary and secondary circuit incorporates isolation valves on the flow and the primary also has one on the return. Maximum working pressures: Secondary DHW: 10.0 Bar Primary CH: 2.5 Bar Maximum operating temperatures: Secondary DHW: 65.0°C Primary CH: 85.0°C

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
240202716
Size:
DHW: 22mm compression. CH: 22mm compression
Marking:
Vaillant logo, serial number, CE, pressure and other technical information on adhesive label on bottom of unit
Installation Requirements:
R001 R140 R360
Expiry date:
28/02/2029
Model:
0010019980 – VUW 246/7-2 (H-GB) ecoTec sustain 24 0010019981 – VUW 286/7-2 (H-GB) ecoTec sustain 28 0010019982 – VUW 346/7-2 (H-GB) ecoTec sustain 34

Approval Holder:
Vaillant GmbH
Company Name
Vaillant GmbH
Address
Berghauser Strasse, 40 D-42859 Remscheid
Country
Germany
Phone
Tel: +49 2191 182126

View All Listings by this Company

Print This Approval


#240102070

Range of in-line water meters with plastic or brass bodies (see model) with stainless-steel strainers at the inlet. Maximum working pressure 16.0 Bar Maximum operating temperature 23.0°C

Section:
1505 Water Meters
Size:
½” BSP (M) (DN15), 1¼” BSP (M) (DN25), 1 ½” BSP (M) (DN32) or 2” BSP (M) (DN40) Inlets x Outlets
Marking:
Itron logo, Aquadis, Pressure, CE and other information on faceplate. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/01/2029
Model:
P1 HR Aquadis+ DN15 brass P1 HR Aquadis+ DN15 composite P111+ Aquadis+ DN25 brass P110+ Aquadis+ DN32 brass P290+ Aquadis+ DN40 brass

Approval Holder:
Itron Metering Solutions UK Ltd
Company Name
Itron Metering Solutions UK Ltd
Address
Unit 10, Haven Exchange Felixstowe Suffolk
Postcode
IP11 2QX
Phone
+44 161 865 1181

View All Listings by this Company
Manufacturer:
Itron Metering Solutions UK Ltd
Company Name
Itron Metering Solutions UK Ltd
Address
Unit 10, Haven Exchange Felixstowe Suffolk
Postcode
IP11 2QX
Phone
+44 161 865 1181

View All Listings by this Company

Print This Approval


#2312083

CZ4000 range of in-line water meters with polyamide bodies and EPDM rubber `O` rings. The meters incorporate a plastic strainer. Maximum working pressure 16.0 Bar

Non-metallic materials and components comply with BS6920 at 50°C

Section:
1505 Water Meters
Size:
¾” BSP M Inlet x Outlet
Marking:
Contazara , Model, Pressure, CE and other information on faceplate.
Installation Requirements:
R001
Expiry date:
31/12/2028
Model:
CZ4000 Range DN 15 110mm DN 15 115mm DN 15 134mm DN 15 165mm DN 15 170mm DN 15 190mm DN 20 110mm DN 20 115mm DN 20 134mm DN 20 165mm DN 20 170mm DN 20 190mm

Approval Holder:
Contadores De Agua De Zaragoza S.A. (Contazara S.A.)
Company Name
Contadores De Agua De Zaragoza S.A. (Contazara S.A.)
Address
Carretera Castellon KM. 5 5 50720 Zaragoza Spain

View All Listings by this Company

Print This Approval


#240108002

Range of DZR brass metering stations supplied with red and blue test points for upstream and downstream port identification. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1530 Miscellaneous Fittings
Size:
See models.
Marking:
Size, PN25, HNH Hatersley logo, flow arrow and model on body.
Installation Requirements:
R001 R120
Expiry date:
31/01/2029
Model:
Fig 1000, Fig 1000 (Low Flow) & Fig 1000M (Medium Flow): Inlet: ½” screwed ISO 228 parallel BSPP (F). Outlet: ½” taper threaded to BS EN 10266-2 BSPT (M). Fig 1000: Inlet: ¾”, 1”, 1¼”, 1½” or 2” taper threaded BS EN 10226-2 BSPT (F). Outlet: ¾”, 1”, 1¼”, 1½” or 2” taper threaded BS EN 10226-2 BSPT (M).

Approval Holder:
Hattersley
Company Name
Hattersley
Address
11-15 Epsilon Terrace West Road Ipswich Suffolk
Postcode
IP3 9FJ
Country
United Kingdom
Phone
0766465023
General Email
tturner@cranebsu.com

View All Listings by this Company

Print This Approval


#240204050

Range of wall & floor mounted, two hole, single outlet combination tap assemblies with brass bodies incorporating ceramic cartridge headworks with single lever operating members. Spout incorporates a plastic aerator. Products also incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1530 Miscellaneous Fittings
Size:
½” BSP (M).
Marking:
Gessi on handle.
Installation Requirements:
R001 R010 R030
Expiry date:
28/02/2029
Model:
65113 (wall mounted), 65128 (floor mounted) + 65099 (floor mounting plate / roughing set).

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 433 of 891

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.