Directory Search Results

Fittings Materials
Print List

#2107098

Range of hand wash and dryer units The flow is controlled by a solenoid valve activated via an infra-red sensor. The products are supplied with a non-verifiable double check valve assembly (suitable for backflow protection against Fluid category 3) for installation on the inlet. The double check valve assembly also incorporates a drain port, (located in between the cartridges), and an integral spherical valve. Maximum working pressure 10.0 bar. Maximum operating temperature 50ºC.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2107098
Size:
15mm compression
Marking:
Wallgate on face cover. Wallgate, model, serial number, date of manufacture (DD/MM/YY) and other product info on label on control panel.
Installation Requirements:
R001 R008 R040 R570
Expiry date:
31/07/2026
Model:
Thrii-SS (Solid Surface fascia), Thrii-DIS-SS (Disabled design, Solid Surface fascia), Thrii-ST (Stainless Steel fascia), Thrii-CW-SS (Cold water only, Solid Surface fascia - instantaneous water heater removed), Thrii-CW-ST (Cold water only, Stainless Steel fascia - instantaneous water heater removed), Thrii-DIS-CW-SS (Disabled design, Cold water only, Solid Surface fascia - instantaneous water heater removed), Thrii-ST-RA (Stainless Steel fascia – Rear Access), Thrii-SS-RA (Solid Surface fascia – Rear Access), Thrii-Marine.
Product Images
Approval Holder:
Wallgate Ltd.
Company Name
Wallgate Ltd.
Address
Crow Lane Salisbury
Postcode
SP2 0HB
Country
United Kingdom
Phone
01722 702058
General Email
jmarshall@wallgate.com

View All Listings by this Company
Manufacturer:
Wallgate Ltd.
Company Name
Wallgate Ltd.
Address
Crow Lane Salisbury
Postcode
SP2 0HB
Country
United Kingdom
Phone
01722 702058
General Email
jmarshall@wallgate.com

View All Listings by this Company

Print This Approval

#2107073

Range of booster pumps with stainless steel bodies and impellers (AISI 304: AL-RED models or AISI 316: CP models), EPDM ‘O’-rings and a ceramic/graphite/EPDM shaft seal. Maximum working pressure: CP(m) 100-130-132-150-158 and AL-RED(m) 600-610-620 models: 6.0 bar. All other models: 8.0 bar. Maximum operating temperature 90°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2107073
Size:
1 ¼” BSP (F).
Marking:
Pedrollo, made in Italy, production date and information (YY/production line: number or letter/DDD), maximum temperature and other technical information on data plate on body.
Installation Requirements:
R001 R415
Expiry date:
31/07/2026
Model:
Single phase (CPm or AL-REDm) or three phase (CP or AL-RED): CP(m) 100-ST4. CP(m) 130-ST4. CP(m) 132-ST4. CP(m) 150-ST4. CP(m) 158-ST4. CP(m) 170-ST4. CP(m) 170M-ST4. CP(m) 180-ST4. CP(m) 190-ST4. CP(m) 200-ST4. CP(m) 100-ST6. CP(m) 130-ST6. CP(m) 132-ST6. CP(m) 150-ST6. CP(m) 158-ST6. CP(m) 170-ST6. CP(m) 170M-ST6. CP(m) 180-ST6. CP(m) 190-ST6. CP(m) 200-ST6. AL-RED(m) 600 -4. AL-RED(m) 610 -4. AL-RED(m) 620 -4. AL-RED(m) 650 -4. AL-RED(m) 660 -4. AL-RED(m) 670 -4. AL-RED(m) 650M -4. AL-RED(m) 660M -4. AL-RED(m) 670M -4. AL-RED(m) 650L -4. AL-RED(m) 660L -4. AL-RED(m) 670L -4. AL-RED(m) 600 -6. AL-RED(m) 610 -6. AL-RED(m) 620 -6. AL-RED(m) 650 -6. AL-RED(m) 660 -6. AL-RED(m) 670 -6. AL-RED(m) 650M -6. AL-RED(m) 660M -6. AL-RED(m) 670M -6. AL-RED(m) 650L -6. AL-RED(m) 660L -6. AL-RED(m) 670L -6.
Product Images
Approval Holder:
Pedrollo S.p.A.
Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Country
Italy
Phone
+39 045 6136311
General Email
vendite@pedrollo.com

View All Listings by this Company
Manufacturer:
Pedrollo S.p.A.
Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Country
Italy
Phone
+39 045 6136311
General Email
vendite@pedrollo.com

View All Listings by this Company

Print This Approval

#2107031

Centrifugal pump with a plastic body, plastic impellers and NBR ‘O’-rings. The product includes an (integral) expansion vessel and the inlet incorporates a non-return valve (not suitable for backflow protection). Maximum working pressure 4.5 bar. Maximum operating temperature 50°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2107031
Size:
1” BSP (F)
Marking:
LEO on control face. Leo Group Pump(Zhejiang) Co.,Ltd logo ‘LEO’, CE, model number, maximum temperature and other technical info on data plate on body.
Installation Requirements:
R001 R415
Expiry date:
31/07/2026
Model:
MAC550
Product Images
Approval Holder:
Leo Group Pump(Zhejiang) Co.,Ltd
Company Name
Leo Group Pump(Zhejiang) Co.,Ltd
Address
No.1, 3rd street, East industry Center,Wenling, Zhejiang

View All Listings by this Company
Manufacturer:
Leo Group Pump(Zhejiang) Co.,Ltd
Company Name
Leo Group Pump(Zhejiang) Co.,Ltd
Address
No.1, 3rd street, East industry Center,Wenling, Zhejiang

View All Listings by this Company

Print This Approval

#2105052

Single pump units with plastic bodies and impellers, EPDM ‘O’-rings, expansion vessel with an EPDM membrane and a carbon graphite/ceramic/NBR shaft seal (bt-ar 13 bx 4ff xp). Each pump inlet incorporates a non-return valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2105052
Size:
1” BSP (M) to pump. 1½” BSP (F) to manifold (twin models only).
Marking:
wilo on body. Wilo, Model, WRAS, PN & max temp
Installation Requirements:
R001 R415
Expiry date:
31/05/2026
Model:
SINGLE PUMP BOOSTER SET: Isar BOOST5-E-3 (WILO) & Isar BOOST5-E-3-G (WILO)- single pump, size 3 m³/h (50l/min). SINGLE PUMP BOOSTER SET: Isar BOOST5-E-5 (WILO) & Isar BOOST5-E-5-G (WILO) -single pump, size 5 m³/h (83.33l/min).
Product Images
Approval Holder:
Wilo SE.
Company Name
Wilo SE.
Address
Nortkirchenstraße 100, 442363, Dortmund
Country
Germany

View All Listings by this Company

Print This Approval

#2107320

Range of shower arms with a brass body and various finishes. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2107320
Size:
½” BSP(M) x ½” BSP (F)
Marking:
KOHLER on shower arm
Installation Requirements:
R001 R040
Expiry date:
31/07/2026
Model:
15396T-B-** (length 15”) 15397T-B-** (length 19”) Where ** denotes finish and can be replaced with: BZ - Antique Bronze, SA - Antique Silver, 96 - Biscuit, 7 - Black, W7 - Black Nickel, LB - Bronze, G - Brushed Chrome, AG - Brushed Nickel, BS - Brushed Stainless, FGN - Chartreuse, FRD - Cherry Red, GN - Gunmetal, BL - Matte Black, YG - Matte Gold, FNY - Navy Blue, AD - Nickel Silver, R2B - Oil Rubbed Bronze-Gold, 2BZ - Oil Rubbed Bronze, CP - Polished Chrome, 1CP - Polished Chrome, ABS PGD - Polished Gold, 24K - Polished Gold, S - Polished Stainless, AGP PVD - Brushed Nickel, 24P PVD - Polished Gold, ADP PVD - Silver Nickel, FBG - Retro Blue, RGD - Rose Gold, TB - Satin Black, SSL - Sterling Silver, TT - Titanium, ULB - Un-lacquered Brass, BV - Vibrant Brushed Bronze, BN - Vibrant Brushed Nickel, AF - Vibrant French Gold, BGD - Vibrant Modern Brushed Gold, PB - Vibrant Polished Brass, SN - Vibrant Polished Nickel, VS - Vibrant Stainless, VNT - Vintage Nickel, W6 - Weathered Bronze, 0 - White, MB - Modern Brass
Product Images
Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 431 of 2219

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.