Directory Search Results

Print List

#2302801

'PCR-E' range of flow regulators with chrome plated brass housing and NBR sealing gaskets. Maximum operating temperature 65°C.

Section:
0435 Taps and shower valves - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2302801
Note:
Claims of flow rate are made by the manufacturer and not considered part of the listing.
Size:
½” BSP (M) x ½” BSP (F)
Marking:
Neoperl on body
Installation Requirements:
R001
Expiry date:
29/02/2028
Model:
A5.2209.0 PCR-E f G1/2 – m G1/2 1,0L. A5.2210.0 PCR-E f G1/2 – m G1/2 2,0L. A5.2211.0 PCR-E f G1/2 – m G1/2 3,0L. A5.2212.0m PCR-E f G1/2 – m G1/2 3,5L. A5.2213.0 PCR-E f G1/2 – m G1/2 4,0L. A5.2215.0 PCR-E f G1/2 – m G1/2 5,0L. A5.2217.0 PCR-E f G1/2 – m G1/2 6,0L. A5.2219.0 PCR-E f G1/2 – m G1/2 7,0L. A5.2221.0 PCR-E f G1/2 – m G1/2 8,0L. A5.2223.0 PCR-E f G1/2 – m G1/2 9,0L. A5.2225.0 PCR-E f G1/2 – m G1/2 10,0L. A5.2226.0 PCR-E f G1/2 – m G1/2 12,0L. A5.2227.0 PCR-E f G1/2 – m G1/2 14,0L. A5.2228.0 PCR-E f G1/2 – m G1/2 15,0L. A5.2230.0 PCR-E f G1/2 – m G1/2 18,0L. A5.2232.0 PCR-E f G1/2 – m G1/2 22,0L. A5.2345.0 PCR-E-LP f G1/2 – mG/12 7,6L EON. A5.2412.0 PCR- E m G1/2 -f G1/2 3,5L. A5.2415.0 PCR- E m G1/2 -f G1/2 5,0L. A5.2417.0 PCR- E m G1/2 -f G1/2 6,0L. A5.2421.0 PCR- E m G1/2 -f G1/2 8,0L. A5.2422.0 PCR- E m G1/2 -f G1/2 9,0L. A5.2425.0 PCR- E m G1/2 -f G1/2 10,0L. A5.2426.0 PCR- E m G1/2 -f G1/2 12,0L. A5.2427.0 PCR- E m G1/2 -f G1/2 14,0L. A5.2432.0 PCR- E m G1/2 -f G1/2 18,0L.

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#2211002

Range of thermostatic cartridges with EPDM ‘O’-rings and stainless-steel filters, to be installed into specifically dimensioned bodies. Maximum operating temperature - 75°C

Section:
0442 Thermostatic cartridges
Section Subtitle:
Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:
2211002
Marking:
Zonly logo on body
Installation Requirements:
R001
Expiry date:
30/11/2027
Model:
ZL-CFXS35 - Ø35mm ZL-CFXT28 – Ø28mm ZL-CFXT35 - Ø35mm ZL-LFXS35 – Ø35mm ZL-LFXT27 – Ø27mm ZL-LFXT28 – Ø28mm ZL-LFXT35 – Ø35mm ZL-LFXT45 – Ø45mm
Product Images

Approval Holder:
Taizhou Zhonglin Intelligent Bathroom Technology Co., Ltd
Company Name
Taizhou Zhonglin Intelligent Bathroom Technology Co., Ltd
Address
Fanhai Village, Qinggang Town Yuhuan, Taizhou City Zhejiang Province, China

View All Listings by this Company
Manufacturer:
Taizhou Zhonglin Intelligent Bathroom Technology Co., Ltd
Company Name
Taizhou Zhonglin Intelligent Bathroom Technology Co., Ltd
Address
Fanhai Village, Qinggang Town Yuhuan, Taizhou City Zhejiang Province, China

View All Listings by this Company

Print This Approval


#2210360

Single hole, single outlet (swivel) combination tap assemblies stainless steel (various finishes), incorporating a ceramic cartridge headworks with single lever operating member and pullout spray handset. The spout outlet incorporates a plastic aerator and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2210360
Size:
Stainless steel braided PET lined flexible hose assemblies with ½” BSP (F) captive nut end connections
Marking:
ABI, WRAS on body
Installation Requirements:
R001 R007 R009 R090
Expiry date:
31/10/2027
Model:
13396,13395, 13394,13393, 13952 & 14351 combination tap assemblies

Approval Holder:
ABI Interiors Pty. Ltd.
Company Name
ABI Interiors Pty. Ltd.
Address
3/128 Kortum Drive, Burleigh Heads, Gold Coast QLD, 4220
Country
Australia

View All Listings by this Company

Print This Approval


#2211012

Single hole, single outlet (swivel) combination tap assembly (brass body - various finishes), incorporating a ceramic cartridge headwork with single leaver operating member. The spout outlet is a pull-out spray type incorporating a plastic aerator. The pull-out hose inlet connector incorporates an approved check valve cartridge, however, , the complete assembly has not been tested to demonstrate it provides backflow prevention Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2211012
Size:
Stainless steel braided PEX lined flexible hose with 1/2" BSP captive nut end connections.
Marking:
LOTA On Body
Installation Requirements:
R001 R009 R090
Expiry date:
30/11/2027
Model:
63557-00X Remark: X means different finishes. Including where X=01, Chrome, X=6801, Matt Black , X=4408, Brushed Brass, X=0402, Brushed Nickel PVD X=5804, Heirloom Silver , X=08, Stainless steel , X=04, Brushed Nickel
Product Images

Approval Holder:
Xiamen lota international co. ltd
Company Name
Xiamen lota international co. ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company
Manufacturer:
Xiamen lota international co. ltd
Company Name
Xiamen lota international co. ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company

Print This Approval


#2211018

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks with single lever operating members. The spout is a pull-down hose and handset with an optional spray function. The outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2211018
Size:
PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP (F) captive nut end connection.
Marking:
Gaoao on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2027
Model:
ZA1143
Product Images

Approval Holder:
ZHEJIANG GAOAO SANITARY WARE CO.,LTD.
Company Name
ZHEJIANG GAOAO SANITARY WARE CO.,LTD.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Postcode
318020
Country
China
General Email
2900324142@qq.com

View All Listings by this Company
Manufacturer:
ZHEJIANG GAOAO SANITARY WARE CO.,LTD.
Company Name
ZHEJIANG GAOAO SANITARY WARE CO.,LTD.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Postcode
318020
Country
China
General Email
2900324142@qq.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 427 of 1250

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.