Filling loop assemblies consisting of a stainless steel braided EPDM lined flexible hose, an isolation valve and another isolation valve incorporating a non-verifiable double check valve assembly, verified by test (suitable for backflow protection against fluid category 3). The FL12041515 model is supplied with an isolation valve including a dial type pressure gauge. The FL12041525 model is also supplied with brass end caps incorporating EPDM washers. For use with coper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1015 Filling Loop

Size:

15mm compression

Marking:

Intatec logo, CR, flow arrow and size on body of combined isolation valve and double check assembly.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

FL12041515, FL12041520, FL12041525.

Product Images

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Filling loop assemblies consisting of a stainless steel braided EPDM lined flexible hose, an isolation valve and another isolation valve incorporating a non-verifiable double check valve assembly, verified by test (suitable for backflow protection against fluid category 3). The 171293 model is supplied with an isolation valve including a dial type pressure gauge. The 171292 model is also supplied with brass end caps incorporating EPDM washers. For use with coper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1015 Filling Loop

Size:

15mm compression

Marking:

Center, CR, flow arrow and size on body of combined isolation valve and double check assembly.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

171291 CENTER G24 FILLING LOOP 171292 CENTER G24 FILLING LOOP WITH CAPS 171293 CENTER G24 FILLING LOOP WITH GAUGE

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of water filters comprising of plastic filter heads and plastic filter cartridges. Maximum working pressure 5.0 bar. Cold water use only.

Section:

1050 Filters and Housings

Size:

3/8" push-fit.

Marking:

Mizitec logo on body.

Installation Requirements:

R001 R008 R120 R150 R170 R290

Expiry date:

31/01/2028

Model:

SINGLE Anti-scale carbon water filter with double filters, SINGLEFH Anti-scale carbon water filter with single filter, LS5004051 Anti-scale carbon water filter.

Product Images

Approval Holder:

XiaMen Mizi Water Purification Technology Co., Ltd.

Company Name

XiaMen Mizi Water Purification Technology Co., Ltd.

Address

4th Floor No.286, Zhaogang Road, Neicuo, Xiang’an District, Xiamen

Country

China

Phone

+86 15860778772

View All Listings by this Company

Manufacturer:

XiaMen Mizi Water Purification Technology Co., Ltd.

Company Name

XiaMen Mizi Water Purification Technology Co., Ltd.

Address

4th Floor No.286, Zhaogang Road, Neicuo, Xiang’an District, Xiamen

Country

China

Phone

+86 15860778772

View All Listings by this Company

Range of stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with Mingshi stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303363

Size:

see model

Marking:

Mingshi Logo, size & material on pipe and fitting body.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

Male threaded coupler: S15х1/2"W: 15 x ½” BSP (M), S15х3/4"W: 15 x ¾” BSP (M), S18х1/2"W: 18 x ½” BSP (M), S18х3/4"W: 18 x ¾” BSP (M), S22х1/2"W: 22 x ½” BSP (M), S22х3/4"W: 22 x ¾” BSP (M), S22х1"W: 22 x 1” BSP (M), S28х3/4"W: 28 x ¾” BSP (M), S28x1"W: 28 x 1” BSP (M), S35x1"W: 35 x 1” BSP (M), S35x1 1/4"W: 35 x 1¼” BSP (M), S42х1 1/2"W: 42 x 1½” BSP (M), S54х2"W: 54 x 2” BSP (M). Male threaded coupler with straight pipe: 15х1/2"W: 15 x ½” BSP (M), 15x3/4"W: 15 x ¾” BSP (M), 18х1/2"W: 18 x ½” BSP (M), 18х3/4"W: 18 x ¾” BSP (M), 18x1"W: 18 x 1” BSP (M), 22х1/2"W: 22 x ½” BSP (M), 22х3/4"W: 22 x ¾” BSP (M), 22x1"W: 22 x 1” BSP (M), 28х3/4"W: 28 x ¾” BSP (M), 28х1"W: 28 x 1” BSP (M), 35х1 1/4"W: 35 x 1¼” BSP (M), 42х1 1/2"W: 42 x 1½” BSP (M), 54х2"W: 54 x 2” BSP (M). Female threaded coupler: S15х1/2"N: 15 x ½” BSP (F), S18х1/2"N: 18 x ½” BSP (F), S18х3/4"N: 18 x ¾” BSP (F), S22х1/2"N: 22 x ½” BSP (F), S22х3/4"N: 22 x ¾” BSP (F), S28х3/4"N: 28 x ¾” BSP (F), S28х1"N: 28 x 1” BSP (F), S35x1"N: 35 x 1” BSP (F), S35x1 1/4"N: 35 x 1¼” BSP (F), S42х1 1/2"N: 42 x 1½” BSP (F), S54х2"N: 54 x 2” BSP (F). Female threaded coupler with straight pipe: 15х1/2"N: 15 x ½” BSP (F), 15x3/4"N: 15 x ¾” BSP (F), 18х1/2"N: 18 x ½” BSP (F), 18х3/4"N: 18 x ¾” BSP (F), 18x1"N: 18 x 1” BSP (F), 22х1/2"N: 22 x ½” BSP (F), 22х3/4"N: 22 x ¾” BSP (F), 22x1"N: 22 x 1” BSP (F), 28х3/4"N: 28 x ¾” BSP (F), 28х1"N: 28 x 1” BSP (F), 35х1 1/4"N: 35 x 1¼” BSP (F), 42х1 1/2"N: 42 x 1½” BSP (F), 54х2"N: 54 x 2” BSP (F). Coupler: S15: 15 x 15mm, S18х15: 18 x 15mm, S18: 18 x 18mm, S22х18: 22 x 18mm, S22х15: 22 x 15mm, S22: 22 x 22mm, S28х15: 28 x 15mm, S28х22: 28 x 22mm, S28: 28 x 28mm, S35х28: 35 x 28mm, S35: 35 x 35mm, S42х35: 42 x 35mm, S42: 42 x 42mm, S54х42: 54 x 42mm, S54: 54 x 54mm. Coupler with straight pipe: S18х15Ⅱ: 18 x 15mm, S22х15Ⅱ: 22 x 15mm, S22х18Ⅱ: 22 x 18mm, S28х15Ⅱ: 28 x 15mm, S28х18Ⅱ: 28 x 18mm, S28х22Ⅱ: 28 x 22mm, S35х15Ⅱ: 35 x 15mm, S35х18Ⅱ: 35 x 18mm, S35х22Ⅱ: 35 x 22mm, S35х28Ⅱ: 35 x 28mm, S42х22Ⅱ: 42 x 22mm, S42х28Ⅱ: 42 x 28mm, S42х35Ⅱ: 42 x 35mm, S54х28Ⅱ: 54 x 28mm, S54х35Ⅱ: 54 x 35mm, S54х42Ⅱ: 54 x 42mm. Adjustable connector: S15Ⅱ: 15 x 15mm, S18Ⅱ: 18 x 18mm, S22Ⅱ: 22 x 22mm, S28Ⅱ: 28 x 28mm, S35Ⅱ: 35 x 35mm, S42Ⅱ: 42 x 42mm, S54Ⅱ: 54 x 54mm. Union: H15х1/2": 15 x ½” captive nut, H15х3/4": 15 x ¾” captive nut, H18х1/2": 18 x ½” captive nut, H18х3/4": 18 x ¾” captive nut, H22х1/2": 22 x ½” captive nut, H22х3/4": 22 x ¾” captive nut, H28х3/4": 28 x ¾” captive nut, H28х1": 28 x 1” captive nut, H35x1": 35 x 1” captive nut, H35x1 1/4": 35 x 1¼” captive nut, H42х1 1/2": 42 x 1½” captive nut, H54х2": 54 x 2” captive nut. Tee: T15: 15 x 15 x 15mm, T18х15х18: 18 x 15 x 18mm, T18: 18 x 18 x 18mm, T22х18х22: 22 x 18 x 22mm, T22х15х22: 22 x 15 x 22mm, T22: 22 x 22 x 22mm, T28x15x28: 28 x 15 x 28mm, T28х22х22: 28 x 22 x 22mm, T28x22x28: 28 x 22 x 28mm, T28: 28 x 28 x 28mm, T35x15x35: 35 x 15 x 35mm, T35x22x35: 35 x 22 x 35mm, T35x28x35: 35 x 28 x 35mm, T35: 35 x 35 x 35mm, T42х35х42: 42 x 35 x 42mm, T42: 42 x 42 x 42mm, T54х42х54: 54 x 42 x 54mm, T54: 54 x 54 x 54mm. Female threaded Tee: T15х1/2"Nx15: 15 x ½” BSP (F) x 15mm, T18х1/2"Nx18: 18 x ½” BSP (F) x 18mm, T18х3/4"Nx18: 18 x ¾” BSP (F) x 18mm, T22х1/2"Nx22: 22 x ½” BSP (F) x 22mm, T22х3/4"Nx22: 22 x ¾” BSP (F) x 22mm, T28х1/2"Nx28: 28 x ½” BSP (F) x 28mm, T28х3/4"Nx28: 28 x ¾” BSP (F) x 28mm, T28х1"Nx28: 28 x 1” BSP (F) x 28mm, T35х1"Nx35: 35 x 1” BSP (F) x 35mm, T35х1 1/4"Nx35: 35 x 1¼” BSP (F) x 35mm, T42х1 1/2"Nх42: 42 x 1½” BSP (F) x 42mm, T54х2"Nх54: 54 x 2” BSP (F) x 54mm. Male threaded Tee: T15х1/2"Wx15: 15 x ½” BSP (M) x 15mm, T18х1/2"Wx18: 18 x ½” BSP (M) x 18mm, T18х3/4"Wx18: 18 x ¾” BSP (M) x 18mm, T22х1/2"Wx22: 22 x ½” BSP (M) x 22mm, T22х3/4"Wx22: 22 x ¾” BSP (M) x 22mm, T28х1/2"Wx28: 28 x ½” BSP (M) x 28mm, T28х3/4"Wx28: 28 x ¾” BSP (M) x 28mm, T28х1"Wx28: 28 x 1” BSP (M) x 28mm, T35х1"Wx35: 35 x 1” BSP (M) x 35mm, T35х1 1/4"Wx35: 35 x 1¼” BSP (M) x 35mm, T42х1 1/2"Wх42: 35 x 1½” BSP (M) x 35mm, T54х2"Wх54: 54 x 2” BSP (M) x 54mm. 90°B Elbow: L15a: 15 x 15mm, L18а: 18 x 18mm, L22a: 22 x 22mm, L28a: 28 x 28mm, L35a: 35 x 35mm, L42а: 42 x 42mm, L54а: 54 x 54mm. 90°A Elbow: L15: 15 x 15mm, L18: 18 x 18mm, L22: 22 x 22mm, L28: 28 x 28mm, L35: 35 x 35mm, L42: 42 x 42mm, L54: 54 x 54mm. Female threaded elbow: L15х1/2"N: 15 x ½” BSP (F), L18х1/2"N: 18 x ½” BSP (F), L18х3/4"N: 18 x ¾” BSP (F), L22х1/2"N: 22 x ½” BSP (F), L22х3/4"N: 22 x ¾” BSP (F), L28х3/4"N: 28 x ¾” BSP (F), L35х1"N: 35 x 1” BSP (F). Male threaded elbow: L15x1/2"W: 15 x ½” BSP (M), L18х1/2"W: 18 x ½” BSP (M), L18х3/4"W: 18 x ¾” BSP (M), L22x1/2"W: 22 x ½” BSP (M), L22x3/4"W: 22 x ¾” BSP (M), L28x3/4"W: 28 x ¾” BSP (M), L35x1"W: 35 x 1” BSP (M). Female threaded elbow with base: L15х1/2"N(a): 15 x ½” BSP (F), L18х1/2"N(a): 18 x ½” BSP (F), L22х1/2"N(a): 22 x ½” BSP (F), L22х3/4"N(a): 22 x ¾” BSP (F). 45°B Elbow: 45°L15a: 15 x 15mm, 45°L18а: 18 x 18mm, 45°L22a: 22 x 22mm, 45°L28a: 28 x 28mm, 45°L35a: 35 x 35mm, 45°L42а: 42 x 42mm, 45°L54а: 54 x 54mm. 45°A Elbow: 45°L15: 15 x 15mm, 45°L18: 18 x 18mm, 45°L22: 22 x 22mm, 45°L28: 28 x 28mm, 45°L35: 35 x 35mm, 45°L42: 42 x 42mm, 45°L54: 54 x 54mm. One end pipe bridge: Ω15a: 15 x 15mm, Ω18a: 18 x 18mm, Ω22a: 22 x 22mm. Pipe Bridge: Ω15: 15 x 15mm, Ω18: 18 x 18mm, Ω22: 22 x 22mm, Ω28: 28 x 28mm. Cap: D15: 15 x 15mm, D18: 18 x 18mm, D22: 22 x 22mm, D28: 28 x 28mm, D35: 35 x 35mm, D42: 42 x 42mm, D54: 54 x 54mm. Pipe: Mingshi Stainless Steel Pipe (To EN 10312) 15mm to 54mm.

Product Images

Approval Holder:

Zhejiang Mingshi Stainless Steel Co.,Ltd.

Company Name

Zhejiang Mingshi Stainless Steel Co.,Ltd.

Address

Huxi Village, Diankou Town, Zhuji City, Shaoxing City, Zhejiang Province

Country

China

View All Listings by this Company

The “TH Instantor” range of press fittings and pipe. Fittings incorporate EPDM ‘O’-rings Maximum working pressure 10 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2304341

Size:

SEE MODEL

Marking:

Manufacturers logo, TH and size on fitting. Instantor, WRAS, size, length and ISO 21003 on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

IP10001 16mm IP10002 20mm IP10003 26mm IP10004 32mm IP10005 40mm IP10006 50mm IP10021 20 x 16mm IP10031 26 x 16mm IP10032 26 x 20mm IP10042 32 x 20mm IP10043 32 x 26mm IP10052 40 x 20mm IP10053 40 x 26mm IP10054 40 x 32mm IP10056 50 x 26mm IP10063 50 x 32mm IP10064 50 x 40mm IP11001 1/2"M x 16mm IP11021 3.4" M x 16mm IP11012 1/2" M x 20mm IP11002 3/4" M x 20mm IP11032 1" M x 20mm IP11013 1/2"M x 26mm IP11023 3/4"M x 26mm IP11003 1" M x 26mm IP11034 1"M x 32mm IP11004 1 1/4" x 32mm IP11045 1 1/4" M x 40mm IP11056 1 1/2" M x 50mm IP11066 2" M x 50mm IP12001 1/2" F x 16mm IP12021 3/4" F x 16mm IP12002 3/4" F x 20mm IP12032 1" F x 20mm IP12013 1/2" F x 26mm IP12023 3/4" F x 26mm IP12003 1" F x 26mm IP12034 1" F x 32mm IP12002 3/4" F x 20mm IP12045 1 1/4" F x 40mm IP12056 1 1/2" F x 50mm IP13001 1/2" C x 16mm IP13002 3/4" C x 20mm IP13021 3/4" C x 16mm IP13023 3/4" C x 26mm IP13033 1" X x 26mm IP13034 1" C x 32mm IP13101 1/2" C x 16mm IP13102 3/4" C x 20mm IP13110 15mm C x 16mm IP13111 22mm C x 20mm IP14001 16mm x1/2" IP14011 16mm x 15mm IP14002 20mm x 3/4" IP14022 20mm x 22mm IP14033 26mm x 22mm IP14044 26mm x 28mm IP14003 26mm x 3/4" IP14004 26mm x 1" IP14046 32mm x 28mm IP15001 16mm IP15002 20mm IP15003 26mm IP15004 32mm IP15005 40mm IP15006 50mm IP15055 40mm IP15066 50mm IP15011 16mm x 300mm IP15010 16mm x 100mm IP16001 1/2" M x 16mm IP16012 1/2" M x 20mm IP16002 3/4M x 20mm IP16032 1" M x 20mm IP16023 3/4" M x 26mm IP16003 1"M x 26mm IP16034 1"M x 32mm IP16004 1 1/4" M x 32mm IP17001 1/2" F x 16mm IP17001CP 1/2" x 16mm CP IP17012 1/2" F x 20mm IP17002 3/4" F x 20mm IP17032 1" F x 20mm IP17013 1/2" F x 26mm IP17023 3/4" F x 26mm IP17003 1" F x 26mm IP17034 1"F x 32mm IP17004 1 1/4" x 32mm IP18001 16mm IP18002 20mm IP18003 26mm IP18004 32mm IP18005 40mm IP18006 50mm IP18112 16 x 16 x 20 IP18211 20 x 16 x 16 IP18212 20 x 16 x 20 IP18221 20 x 20 x 16 IP18223 20 x 20 x 26 IP18311 26 x 16 x 16 IP18312 26 x 16 x 20 IP18313 26 x 16 x 26 IP18322 26 x 26 x 20 IP18323 26 x 20 x 26 IP18331 26 x 26 x 16 IP18332 26 x 26 x 20 IP18334 26 x 26 x 32 IP18414 32 x 16 x 32 IP18424 32 x 20 x 32 IP18432 32 x 26 x 20 IP18433 32 x 26 x 26mm IP18434 32 x 26 x 32 IP18441 32 x 32 x 16 IP18442 32 x 32 x 20 IP18443 32 x 32 x 26 IP18552 40 x 40 x 20 IP18553 40 x 40 x 26 IP18554 40 x 40 x 32 IP18663 50 x 50 x 26 IP18664 50 x 50 x 32 IP18665 50 x 50 x 40 IP19001 1/2" F x 16mm IP19012 1/2" F x 20mm IP20001 1/2" x 16mm IP20001CP 1/2" x 16mm CP IP20002 15mm x 16mm IP20002CP 15mm x 16mm CP IP20003 3/4" x 20mm IP20004 1" x 26mm IP20005 22mm x 20mm IP20006 28mm x 26mm IP20060 1/2" x 16mm IP20061 15mm x 16mm IP20062 3/4" x 20mm IP21001 16mm x 15mm IP21002 20mm x 22mm IP21003 26mm x 28mm IP21004 16mm x 1/2" IP21005 20mm x 3/4" IP21006 26mm x 1" IP30001 16 x 16 x 1/2"F IP30002 20 x 20 x 3/4" F IP30003 26 x 26 x 1" F IP30443 32 x 32 x 1" F IP30331 32 x 32 x 1"F IP51001 16mm IP51002 20mm IP51003 26mm IP51004 32mm IP93001 16mm IPAP101 16mm x 100M IPAP102 20mm x 100M IPAP103 26mm x 50M IPAP104 32mm x 50M IPAP105 16mm x 500M IPAP107 16mm x 200M IPAP111 16mm x 4M IPAP112 20mm x 4M IPAP113 26mm x 4M IPAP114 32mm x 4M IPAP115 40mm x 4M IPAP116 50mm x 4M IPAP201 16mm x 100M IPAP202 20mm x 50M IPAP203 26mm x 25M IPAP204 32mm x 25M IPAP205 26mm x 50M IPAP301 16mm x 100M IPAP302 20mm x 50M IPAP303 26mm x 25M IPAP304 32mm x 25M IPAP401 16mm x 100M IPAP402 20mm x 50M IPAP403 26mm x 25M IPAP404 32mm x 25M IPAP501 16mm x 50M IPAP502 20mm x 50M IPAP503 26mm x 25M IPAP601 16mm x 50M IPAP602 20mm x 50M IPAP603 26mm x 25M Pipe variants added January 2025: IPAP701, IPAP702, IPAP703 Pipe variant added July 2025 IPAP 504 Insulated pipe variant added September 2025: IPAP1101 - 16mm, IPAP1102 - 20mm, IPAP1103 - 26mm.

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Conex Works, Santry Avenue, Dublin

Postcode

D09 K160

Country

Ireland

Phone

353 1 842 6255

General Email

sales@sanbra.ie

View All Listings by this Company

Range of plastic push-fit fittings (available in black, white and grey) and a manifold (available in grey only) with EPDM or NBR ‘O’-rings. For use with copper pipe (manufactured to EN1057), PE-X pipe (manufactured to BS7291-3:2010) & PB pipe (BS EN 21003-2:2008). Maximum working pressure: 12.5 bar @ 20°C (Cold water use only). From September 2023 the products are suitable for 8.0 bar @ 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303062

Size:

See models.

Marking:

JG logo and size moulded on the collet or body of fitting.

Installation Requirements:

R001 R008

Expiry date:

31/03/2028

Model:

GREY ACETAL FITTINGS COOLING MANIFOLD: NC2183 15mm x 3/8”. METRIC TO IMPERIAL ADAPTORS STRAIGHT CONNECTOR: NC462 15mm x ½”. UNEQUAL STRAIGHT CONNECTOR: NC2511 15mm x 3/8”. STEM TO TUBE ADAPTOR: NC2164 15mm x 3/8”, NC2173 15mm x ½”. STEM TO HOSE CONNECTOR: NC932 15mm x ½”. TUBE TO HOSE CONNECTOR: NC448 15mm x ½”, NC737 22mm x ½”, NC473 22mm x ¾”. ADAPTOR TEE: NC869 15mm x 15mm x 3/8”. STEM TO STEM ADAPTOR: NC478 15mm x 3/8”. ACETAL CM FITTINGS WITH EPDM O-RINGS FEMALE ADAPTOR WITH BSP THREAD: CM451513FS 15mm x 3/8”. TAP ADAPTOR WITH UNS THREAD: CM3210U7E 10mm x 7/16”. TAP ADAPTOR BSP THREAD: CM321014E 10mm x ½” BSP (F), CM3201S 15mm x ½” BSP (F). TAP ADAPTOR FLAT END BSP THREAD: CM321014FE 10mm x ½” BSP (F). TWO-WAY DIVIDER: CM2315W 15mm. STRAIGHT ADAPTOR BSP THREAD: CM011514S 15mm x ½” (M), CM011216S 22mm x ¾” (M). REDUCING STRAIGHT CONNECTOR: CM201510S 15mm x 10mm, CM201512W 15mm x 12mm. REDUCING ELBOW CONNECTOR: CM211210W 12mm x 10mm. SLIP CONNECTOR: CM-SC-15-S 15mm. STEM ELBOW: CM221515W 15mm x 15mm. BLACK ACETAL FITTINGS (METRIC SIZES) STRAIGHT ADAPTORS BSP THREAD: PM011012E 10mm x ¼” BSP (M), PM011013E 10mm x 3/8” BSP (M), PM011014E 10mm x ½” BSP (M), PM011513E 15mm x 3/8” BSP (M), PM011514E 15mm x ½” BSP (M), PM011516E 15mm x ¾” BSP (M), PM012216E 22mm x ¾” BSP (M). STRAIGHT ADAPTERS BSPT THREAD: PM011002E 10mm x ¼” BSPT (M), PM011003E 10mm x 3/8” BSPT (M), PM011004E 10mm x ½” BSPT (M). EQUAL STRAIGHT CONNECTORS: PM0410E 10mm, PM0415E 15mm, PM0422E 22mm. REDUCING STRAIGHT CONNECTORS: PM201004E 10mm x 4mm, PM201006E 10mm x 6mm, PM201008E 10mm x 8mm, PM201210E 12mm x 10mm. EQUAL ELBOW: PM0310E 10mm, PM0315E 15mm, PM0322E 22mm. REDUCING ELBOW CONNECTOR: PM211004E 10mm x 4mm, PM211006E 10mm x 6mm, PM211008E 10mm x 8mm, PM211210E 12mm x 10mm. STEM ELBOW: PM221010E 10mm x 10mm, PM221515E 15mm x 15mm, PM222222E 22mm x 22mm. SWIVEL ELBOW BSP THREAD: PM091012E 10mm x ¼”, PM091013E 10mm x 3/8”, PM091014E 10mm x ½”. SWIVEL ELBOW BSPT THREAD: PM091002E 10mm x ¼”, PM091003E 10mm x 3/8”, PM091004E 10mm x ½”. EQUAL TEE: PM0210E 10MM, PM0215E 15mm, PM0222E 22mm. REDUCING TEE: PM3022AE 22mm x 22mm x 15mm. SWIVEL TEE CENTRE LEG BSP THREAD: PM101012E 10mm x ¼”, PM101013E 10mm x 3/8”, PM101014E 10mm x ½”. SWIVEL TEE CENTRE LEG BSPT THREAD: PM101002E 10mm x ¼“, PM101003E 10mm x 3/8“, PM101004E 10mm x ½“. SWIVEL MALE RUN TEE BSP THREAD: PM111012E 10mm x ¼”, PM111013E 10mm x 3/8”, PM111014E 10mm x ½”. SWIVEL MALE RUN TEE BSPT THREAD: PM111002E 10mm x ¼“, PM111003E 10mm x 3/8“, PM111004E 10mm x ½“. BULKHEAD CONNECTOR: PM1210E 10mm, REDUCER: PM061210E 12mm x 10mm, PM061510E 15mm x 10mm, PM061512E 15mm x 12mm, PM061815E 18mm x 15mm, PM062215E 22mm x 15mm, PM062218E 22mm x 18mm. STEM ADAPTOR BSP THREAD: PM051012E 10mm x ¼” BSP (M), PM051013E 10mm x 3/8” BSP (M), PM051014E 10mm x ½” BSP (M), PM051513E 15mm x 3/8” BSP (M), PM051514E 15mm x ½” BSP (M), PM052214E 22mm x ½” BSP (M), PM052216E 22mm x ¾ ” BSP (M). STEM ADAPTOR BSPT THREAD: PM051002E 10mm x ¼” BSPT (M), PM051003E 10mm x 3/8” BSPT (M), PM051004E 10mm x ½” BSPT (M). TWO WAY DIVIDER: PM2310E 10mm, PM2315E 15mm. PLUG (RED & BLACK): PM0810R 10MM RED, PM0815E 15MM BLACK, PM0822E 22MM BLACK. END STOP: PM4615E 15mm, PM4622E 22mm. FEMALES ADAPTOR BSP THREAD: PM451015FE 10mm x 5/8”. U-BEND: PMUB15E 15mm. BACK PLATE ELBOW: 15PWB 15mm x ½” BSP. WHITE ACETAL FITTINGS BULKHEAD ELBOW: CM551516W 15mm x ¾” BSP.

Product Images

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of end feed brass fittings for use with copper tube (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211825

Size:

End feed: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

Lawton Tubes Logo, size, EN1254 & PN on body.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

Male Straight Adaptor (EFCOMI prefix) "EFCOMI0151/2 15mm x1/2” – EFCOMI0542 54MM X 2” Female Straight Adaptor (EFCOFI prefix) EFCOFI0151/2 15mm x1/2” – EFCOFI0542 54MM X 2” Female Elbow (EFELFI prefix) EFELFI0151/2 15mm x1/2” – EFELFI0281 28mm x 1” Male Union Connector (EFUND prefix) EFUND151/2 15mm x1/2” – EFUND542 54MM X 2”, Female Tee (EFTEFI prefix) EFTEFI015151/2 15 x15mm x ½”- EFTEFI028281 28 X28MM X1”

Approval Holder:

Lawton Tube Company Limited.

Company Name

Lawton Tube Company Limited.

Address

Torrington Avenue Tile Hill Coventry

Postcode

CV4 9AB

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208819

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

Lawton Tubes Logo, EN1254, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

90 Degree Street Elbow (EFELS prefix) EFELS010 10mm – EFELS054 54mm 90 Degree Elbow (EFEL prefix) EFEL008 8mm – EFEL108 108mm Equal Tee (EFTE prefix) EFTE008 8mm – EFTE108 108mm Reducing Tee (EFTE prefix) EFTE0151510 15mmx10mm – EFTE108108108 108mm x108mm Straight Coupling with stop (EFCP prefix) EFCP008 8mm – EFCP108 108mm Straight Slip Coupling (EFESC prefix) EFESC015 15mm - EFESC054 54mm 45 Degree Elbow (EFEL prefix) EFEL00845 8mm – EFEL10845 108mm Reducer Coupling (EFCP prefix) EFCP0108 10mmx 8mm - EFCP108108 108mm x 108mm Reducer fitting (EFRED prefix) EFRED0108 10mmx 8mm – EFRED108108 108mm x 108mm 45 Degree Street Elbow (EFELS prefix) EFELS01545 15mm - EFELS07645 76.1mm 90 Degree Long Radius Elbow (EFELLR prefix) EFELLR015 15mm - EFELLR0108 108mm Cap (EFEC prefix) EFEC008 8mm - EFEC108 108mm Crossover (EFFCO prefix) EFFCO015 15mm - EFFCO022 22mm Part Cross over (EFPCO prefix) EFPCO015 15mm - EFPCO022 22mm Long street elbow (EFELSLT prefix) EFELSLT022 22mm - EFELSLT0108 108mm

Approval Holder:

Lawton Tube Company Limited.

Company Name

Lawton Tube Company Limited.

Address

Torrington Avenue Tile Hill Coventry

Postcode

CV4 9AB

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208820

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

659811 JET REDUCER 67X28mm, 659812 JET REDUCER 67X35mm, 659813 JET REDUCER 67X42mm, 659814 JET REDUCER 67X54mm, 659815 JET REDUCER 76X35mm, 659816 JET REDUCER 76X42mm, 659817 JET REDUCER 76X54mm, 659818 JET REDUCER 76X67mm, 659819 JET REDUCER 108X42mm, 659820 JET REDUCER 108X54mm, 659821 JET REDUCER 108X67mm, 659822 JET REDUCER 108X76mm 659833 JET STRAIGHT COUPLING 67mm, 659834 JET STRAIGHT COUPLING 76mm, 659835 JET STRAIGHT COUPLING 108mm, 659838 JET REDUCED TEE 67X67X28mm, 659839 JET REDUCED TEE 67X67X35mm, 659840 JET REDUCED TEE 67X67X42mm, 659841 JET REDUCED TEE 67X67X54mm, 659842 JET REDUCED TEE 76X76X28mm, 659843 JET REDUCED TEE 76X76X35mm, 659844 JET REDUCED TEE 76X76X42mm, 659845 JET REDUCED TEE 76X76X54mm, 659846 JET REDUCED TEE 108X108X35mm, 659847 JET REDUCED TEE 108X108X54mm, 659848 JET REDUCED TEE 108X108X76mm, 659853 JET EQUAL TEE 67mm, 659854 JET EQUAL TEE 76mm, 659855 JET EQUAL TEE 108mm 659858 JET STOP END 67mm, 659859 JET STOP END 76mm, 659860 JET STOP END 108mm 659863 JET 90D ELBOW 67mm, 659864 JET 90D ELBOW 76mm, 659865 JET 90D ELBOW 108mm, 659868 JET 45D ELBOW 67mm, 659869 JET 45D ELBOW 76mm, 659870 JET45D ELBOW 108mm, 659927 JET 45D STREET ELBOW 67mm, 659928 JET 45D STREET ELBOW 76mm, 659929 JET 90D LONG RADIUS BEND 67mm, 659930 JET 90D LONG RADIUS BEND 76mm, 659931 JET 90D LONG RADIUS BEND 108mm 659873 * JET BRAZING FEMALE IRON ADAPTOR 76X3 659874 * JET BRAZING FEMALE IRON ADAPTOR 108X4 659875 * JET BRAZING MALE IRON ADAPTOR 67X2.1/2 659876 * JET BRAZING MALE IRON ADAPTOR 76X3 659877 * JET BRAZING MALE IRON ADAPTOR 108X4 659926 * JET BRAZING FEM IRON ADAPTOR 67X21.1/2

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

General Email

View All Listings by this Company

Dual flush, WC outlet valves. The valves are operated via a push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2303360

Size:

2” BSP (M)

Marking:

Wirquin on body

Installation Requirements:

R001 R571 R581

Expiry date:

31/03/2028

Model:

Wirquin One (model code 10120440)

Product Images

Approval Holder:

Wirquin Ltd

Company Name

Wirquin Ltd

Address

Unit 3 Alpha Court Thorne Doncaster

Postcode

DN8 5TZ

Country

United Kingdom

Phone

01302 312252

General Email

mick.kirby@wirquin.co.uk

View All Listings by this Company