Range of vertical multistage pumps with stainless-steel bodies, stainless-steel impellers, shaft and outer sleeve. Maximum working pressures: T (oval flange): 16.0 bar. V (Victaullic & grooved), C (clamp flanges) & F (round flange) versions: 26.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2110066

Size:

EV1-EV3 & 1VR-3VR models - F (round flange) versions: DN25. EV6-EV20 & 6VR-20VR models - F (round flange) versions: DN32-50. EV1-EV20 & 1VR-20VR models - T (oval flange), V (Victaullic - EV; Grooved - VR), C (clamp flanges) & F (round flange) versions: DN32-50.

Marking:

Franklin Electric, model name, date of production (DD/MM/YYYY), pressure, temperature and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2026

Model:

EV and VR ranges. Code example (EV range): EV 20 /15 A B C D E F G H J K L M N PMP/A. Where: EV = Pump model EV (EV = E-Tech “brand”). 20 = Rated flow [m³/h] (varies: 1-20). /15 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round; "T" - oval; "V" - Victaulic; "C" - clamp. C = Materials: "I" - (AISI304/EN1.4301); "N" (AISI316/EN1.4401). D = Motor power (kW x 10). E = Frequency: "5" - 50Hz; "6" - 60Hz. F = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. G = Motor type: "Empty" - without motor, "T" - 3-phase; "M" - 1-phase. H = Mechanical Seal: "Empty" - standard version (EV1-EV20 & 1VR-20VR versions only). J = Type of mechanical Seal: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = "Empty" - standard version, "H" - high pressure. L = "Empty" - standard version, "P" - passivated. M = "Empty" - standard version N = "Empty" - no motor, “IE..” motor efficiency class. PMP/A = cold formed pump casing. Code example (VR range): 3 VR0700 A B C X-XXXX. Where: 3 = Rated flow [m³/h] (varies: 1-20). VR = Pump model (VR = FPS “brand”). 07 = No. of stages/impellers. (See model and stages below for more detail). 00 = Impeller trim: 00 = no trim, A1 = 1A (one trimmed impeller), A2 = 2A (two trimmed impellers). A = Materials: "H" - (AISI304/EN 1.4301); "N" (AISI316/EN 1.4401). B = Flange type: "F" - round; "T" - oval; "V" - Grooved (Victaullic); "C" - clamp. C = Mechanical Seal: “1” - QBE; “2” - QQE. X-XXXX = Combination of numbers and letter relating to frame, speed, motor and electronics (does not affect water pathways). Last two digits can be empty for versions without a motor. Minimum and maximum number of stages (please note the oval flange models have a lower maximum, this is included in brackets as follows [15] to denote 15 stages): EV1/1VR: stage from 2 to 37 [23] (50Hz) and from 2 to 25 [15] (60Hz); EV3/3VR: stage from 2 to 33 [21] (50Hz) and from 2 to 23 [14] (60Hz); EV6/6VR: stage from 2 to 36 [21] (50Hz) and from 2 to 23 [14] (60Hz); EV10/10VR: stage from 2 to 24 [15] (50Hz) and from 2 to 17 [10] (60Hz); EV15/15VR: stage from 1 to 17 [10] (50Hz) and from 1 to 12 [10] (60Hz); EV20/20VR: stage from 1 to 17 [10] (50Hz) and from 1 to 10 [7] (60Hz).

Product Images

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Range of shower handsets and shower kits. Shower kits 2.1703.391, 2.1703.015 & 2.1703.016 incorporate a shower handset, shower hose and riser rail. Shower handset inlets incorporate a flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2201338

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Mira shower on body

Installation Requirements:

R001 R040

Expiry date:

31/01/2027

Model:

1.1605.237 Mira Beat 110 Multi Mode Handset Chrome (Module No: 1740.065) 1.1605.238 Mira Beat 110 Multi Mode Handset White (Module No: 1740.066) 2.1703.009 Mira Beat 90 Single Mode White (Module No: 1703.452) 2.1703.011 Mira Beat 90 Single Mode Chrome (Module No: 1703.460) 2.1703.010 Mira Beat 90 Multi Mode White (Module No: 1703.251) 2.1703.012 Mira Beat 90 Multi Mode Chrome (Module No: 1703.250) 2.1703.015 Mira Beat 90 Fittings Kit White/Chrome 2.1703.016 Mira Beat 90 Fittings Kit Chrome 2.1703.391 Mira Beat 90 Bath Shower Fittings Kit (Chrome) 2.1831.003 Mira Beat 90 Eco Multi Mode Handset Chrome (Module No: 1831.001) Model added October 2023 39178W-CP Mira Beat 90 Single Mode Chrome Model added November 2023 (39187W) Mira Beat 90 Fittings Kit Chrome

Product Images

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of shower outlets incorporating brass bodies (various finishes) and NBR ‘O’-rings. Maximum operating temperature 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2205701

Note:

Open outlet use only

Size:

⅜”, ½” and ¾” BSP (F) (all models)

Marking:

MBL on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2027

Model:

Victorian Skirted shower rose: VS65, VS75, VS100, VS125, VS150, VS200, VS300 Victorian skirted easy clean rose: VSEC65, VSEC75, VSEC150, VSEC200, VSEC300 Modern Rose: M75, M150, M200, M300 Modern easy clean rose: MEC65, MEC75, MEC150, MEC200, MEC300 Modern slimline easy clean rose: 75SMEC, 300SMEC Victorian flat front rose: VFF150, VFF200 Slim easy clean rose: SEC200 Models available with a suffix to denote the finish, for example: P = Polished, C = Chroma, G = Gold, N = Nickel

Approval Holder:

Marston Brassware Ltd.

Company Name

Marston Brassware Ltd.

Address

Chancel Indus Est, Hickman Avenue, Wolverhampton.

Postcode

WV1 2UH

Country

United Kingdom

Phone

01902 352 425

General Email

info@marstonbrassware.com

View All Listings by this Company

Manufacturer:

Marston Brassware Ltd.

Company Name

Marston Brassware Ltd.

Address

Chancel Indus Est, Hickman Avenue, Wolverhampton.

Postcode

WV1 2UH

Country

United Kingdom

Phone

01902 352 425

General Email

info@marstonbrassware.com

View All Listings by this Company

Range of shower outlets and shower kits. Shower outlets consisting of wall and ceiling mounted shower heads and hand shower. The inlets incorporate stainless steel flow regulators and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower kits can consist of shower hose, shower handset, riser rail and wall outlet elbow with bracket (depending on model). Shower handset inlet incorporates a stainless-steel strainer. Both the outlet of the wall elbow and inlet of shower handset incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2201324

Note:

Open outlet use only. R007 only applies to model 65127

Size:

See model

Marking:

Gessi on inlet (models 65142, 65123) Gessi on operating member (model 65144) Gessi on shower head (model 65154) Gessi on shower holder (model 65127) Gessi on base plate (models 65148, 65149, 65150, 65152, 65153, 65155)

Installation Requirements:

R001 R007 R040

Expiry date:

31/01/2027

Model:

½” BSP (M): 65123 - shower set 65142 - sliding rail with handshower 65148 - Wall mounted overhead shower 65149 - Wall mounted overhead shower 65150 - Overhead shower 65152 - Overhead shower 65153 - Overhead shower 65154 - Handshower 65155 - Overhead shower ½” Captive nut 65144 - Complete set with sliding rail 65127 – Deck mounted handshower kit

Product Images

Approval Holder:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi Hamlet Vintebbio Serravalle Sesia

Postcode

13037

Country

Italy

Phone

+39 0163 454111

General Email

pfornara@gessi.it

View All Listings by this Company

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi Hamlet Vintebbio Serravalle Sesia

Postcode

13037

Country

Italy

Phone

+39 0163 454111

General Email

pfornara@gessi.it

View All Listings by this Company

Range of filter type fixed ‘shower’ outlets and shower handsets with plastic bodies. Maximum operating temperature 45°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2106051

Note:

Open outlet use only.

Size:

10.90mm Spigot, 18.42mm Spigot or ½” BSP (M)

Marking:

Delabie, CE mark and product info on adhesive label on body.

Installation Requirements:

R001 R040 R120 R150 R170

Expiry date:

30/06/2026

Model:

SHOWER HANDSETS: 20261 & 30261 FIXED SHOWER OUTLETS: 20250, 20251, 30250 & 30251

Approval Holder:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company