Directory Search Results

Print List

#251104701

Range of unvented heat pump storage cylinders which consist of an air-source heat pump sitting on top of the tank with either no internal coil (model numbers ending without S) or a factory fitted single internal coil (model numbers ending with S). The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar @ 90˚C and an stainless steel immersion heater and titanium alloy anode. The product is not supplied with an inlet control group (safety kit). Maximum operating temperature 70°C. Maximum working pressure (primary & secondary circuit) 5.5 bar.

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (F).
Marking:
Clivet on front panel. Clivet and product info on data label.
Installation Requirements:
R001 R140 R360
Expiry date:
30/11/2030
Model:
DSDH-P AQ 1 S 190 (185L), DSDH-P AQ 1 S 300 (275L), DSDH-P AQ 1 S 190S (180L), DSDH-P AQ 1 S 300S (270L).

Approval Holder:
Clivet S.p.A
Company Name
Clivet S.p.A
Address
Via Camp Lonc 25 32032 Z.I. Villapaiera Feltre (BL)
Country
Italy
Phone
+39 0439 3131
General Email
info@clivet.it

View All Listings by this Company

Print This Approval


#251102724

Rinnai range of Direct and indirect unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar @ 90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve pre-set at 3.0 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided Maximum working pressure: 5.5 Bar (All Circuits) Maximum operating temperature 90.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Sizes can be any of the following for all models: Cold Inlet: 22mm stub, 28mm stub, ¾” BSP (F) or 1” BSP (F) Primary and heat pump circuits: 22mm stub, 28mm stub, 32mm stub, ¾” BSP (F), 1” BSP (F) or 1 ¼” BSP (F) Hot Outlet: 22mm stub, 28mm stub, ¾” BSP (F) or 1” BSP (F) Secondary circulation circuit: ½” BSP (F) or ¾” BSP (F)
Marking:
Rinnai, model name, max pressure, max temp, capacity and other technical information on label on body.
Installation Requirements:
R001
Expiry date:
30/11/2030
Model:
Model (Available Capacity (L)) WDE-D2 (80, 100, 130 ,150, 175, 215, 305, 400& 500L) WDE-C1(80, 100, 130 ,150, 175, 215, 305, 400& 500L) WS-C1 (130, 150, 175, 215, 305, 400 & 500 L) WS-C2 (130, 150, 175, 215, 305, 400 & 500 L) WHP-C1 (150, 175, 215, 305, 400 & 500L) WHP-C2 (150, 175, 215, 305, 400 & 500L) WT-D2F5 (100, 130, 150, 175 & 210L) WT-C1F5 (100, 130, 150, 175 & 210L) WT-D2F4 (80, 100, 130, 150 & 165L) WT-C1F4 (80, 100, 130, 150 & 165L) WTR-C2F5 (100, 130, 150, 175 & 210L)
Product Images

Approval Holder:
Rinnai UK Ltd
Company Name
Rinnai UK Ltd
Address
9 Christleton Court Manor Park Runcom
Postcode
WA7 18T
Phone
01928 531 870
General Email
info@rinnaiuk.com

View All Listings by this Company

Print This Approval


#251115308

Section:
2000 Shower Valves
Description:
A Shower valve(s) with manual temperature control.
Wall mounted. Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection).
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
86005640Chrome15mm compression joint10 bar80 °CTRITON,86005640Handle/ bodyNoCeramic cartridge

Approval Holder:
Triton Showers (Part of Norcros Group Holdings)
Company Name
Triton Showers (Part of Norcros Group Holdings)
Address
Triton Road, Nuneaton, Warwickshire
Postcode
CV11 4NR
Country
United Kingdom
Phone
07779013141
General Email
paulrowley@tritonshowers.co.uk

View All Listings by this Company
Manufacturers:
Xiamen Fotec Sanitary Ware Co., Ltd.

Print This Approval


#251108007

Range of manually operated, concealed blending valves with brass body (various finishes) and ceramic cartridge headwork and single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
251108007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F).
Marking:
Coalbrook logo on the shroud.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030
Model:
XX 3005 YY. First two letters (e.g. XX) – These are replaced with letters representing the name of the trim (handles). The number of letters will depend on the name of the trim. Examples are, but not limited to: ZU - which represents the name Zurich. DO - which represents the name Domo. DC - which represents the name Decca. Middle four numbers (e.g. 3005) – This is the numeric code allocated to the model and remains constant. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the name of the finish. Examples are but not limited to: BN - Brushed Nickel, CP - Chrome, GM - Gunmetal, BB - Brushed Brass.

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
Country
United Kingdom
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#251188304

Section:
2010 Shower Valves
Description:
A Range of Shower valve(s) with thermostatic temperature control
Wall Mounted. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Stainless Steel inter-locked shower hose with PVC lining.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
TSSL1Chrome15mm Compression5 bar60 °CAQUALISAshower valveNoSingle sequentialNot ApplicableShower Hose, Handset, Riser Rail,
AQSL1Chrome15mm Compression5 bar60 °CAQUALISAshower valveNoSingle sequentialNot ApplicableShower Hose, Handset, Riser Rail,
Product Images

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 413 of 451

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.