‘AquaGas M range’ of copper and brass press fit fittings with NBR ‘O’-rings for use with copper tube (manufactured to BS EN 1057). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312074

Size:

15 - 54mm. ½” - 2” BSP (M)/(F).

Marking:

PCC GmbH logo (PC), DVGW, size and date of manufacture (YY-MM) on fitting body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Press-Copper AquaGas M range: Brass (15-28mm) or Copper (35-54mm) fittings: 79010: Straight Male Adapter, 79020: Straight Female Adapter. Copper fittings: 79000: Straight Coupling, 79030: Straight Reducer, 79040: Slip Coupler, 79100: Equal Tee, 79110: Reduced Tee, 79120: Female Tee, 79200: Bend 90° ff, 79210: Bend 90° mf, 79230: Bend 45° ff, 79240: Bend 45° mf, 79410: End Cap, 79430: Male Reducer.

Approval Holder:

PCC GmbH

Company Name

PCC GmbH

Address

Dusseldorfer Strasse 15, D-71332 Wailblingen

Country

Germany

View All Listings by this Company

‘DELBRAZE’ range of copper and copper alloy braze fittings for use with copper pipe (EN1057). Maximum working pressure: 16 bar. Maximum working temperature: 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2311066

Size:

See models. Note all sizes are the diameter of the fitting for brazing unless otherwise states.

Marking:

Conex logo >B< and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

5270 – Straight Coupler: 5270 067000000 – 67mm, 5270 06700000L – 67mm long, 5270 076000000 – 76mm, 5270 108000000 – 108mm, 5270 133000000 – 133mm, 5270 159000000 – 159mm. 5243 – Fitting Reducer: 5243 067028000 – 67mm x 28mm, 5243 067035000 – 67mm x 35mm, 5243 067042000 – 67mm x 42mm, 5243 067054000 – 67mm x 54mm, 5243 076035000 – 76mm x 35mm, 5243 076042000 – 76mm x 42mm, 5243 076054000 – 76mm x 54mm, 5243 076067000 – 76mm x 67mm, 5243 108054000 – 108mm x 54mm, 5243 108076000 – 108mm x 76mm, 5243 133108000 – 133mm x 108mm, 5243 159108000 – 159mm x 108mm, 5243 159133000 – 159mm x 133mm. 5009 – Metric to imperial: 5009 076024000 – 76mm x 3”, 5009 108032000 – 108mm x 4”. 5240 – Reduced Coupler: 5240 067028000 – 67mm x 28mm, 5240 067042000 – 67mm x 42mm, 5240 067054000 – 67mm x 54mm, 5240 067054000L – 67mm x 54mm, 5240 076028000 – 76mm x 28mm, 5240 076035000 – 76mm x 35mm, 5240 076042000 – 76mm x 42mm, 5240 076054000 – 76mm x 54mm, 5240 108054000 – 108mm x 54mm, 5240 108076000 – 108mm x 76mm, 5240 133108000 – 133mm x 108mm. 5041 – 45 Deg Obtuse Elbow: 5041 067000000 – 67mm, 5041 067000000L – 67mm, 5041 076000000 – 76mm, 5041 108000000 – 108mm, 5041 133000000 – 133mm, 5041 159000000 – 159mm. 5040 – Obtuse Street Elbow: 5040 067000000 – 67mm, 5040 067000000L – 67mm, 5040 076000000 – 76mm, 5040 108000000 – 108mm, 5040 133000000 – 133mm. 5090 – 90Deg Elbow: 5090 067000000 – 67mm, 5090 076000000 – 76mm, 5090 108000000 – 108mm. 5092 – Street Elbow: 5092 067000000 – 67mm. 5001A – Street Bend: 5001A067000000 – 67mm, 5001A067000000L – 67mm, 5001A076000000 – 76mm, 5001A108000000 – 108mm, 5001A133000000 – 133mm, 5001A159000000 – 159mm. 5002A – Street Elbow: 5002A067000000 – 67mm, 5002A067000000L – 67mm, 5002A076000000 – 76mm, 5002A108000000 – 108mm, 5002A133000000 – 133mm, 5002A159000000 – 159mm. 5130 – Equal Tee: 5130 067067067 – 67mm, 5130 076076076 – 76mm, 5130 108108108 – 108mm, 5130 133133133 – 133mm, 5130 159159159 – 159mm, 5130 067067067L – 67mm. 5130 – Reduced Branch Tee: 5130 067022067 – 67mm x 67mm x 22mm, 5130 067028067 – 67mm x 67mm x 28mm, 5130 067035067 – 67mm x 67mm x 35mm, 5130 067042067 – 67mm x 67mm x 42mm, 5130 067054067 – 67mm x 67mm x 54mm, 5130 076022076 – 76mm x 76mm x 22mm, 5130 076028076 – 76mm x 76mm x 28mm, 5130 076035076 – 76mm x 76mm x 35mm, 5130 076042076 – 76mm x 76mm x 42mm, 5130 076054076 – 76mm x 76mm x 54mm, 5130 076067076 – 76mm x 76mm x 67mm, 5130 108028108 – 108mm x 108mm x 28mm, 5130 108035108 – 108mm x 108mm x 35mm, 5130 108042108 – 108mm x 108mm x 42mm, 5130 108054108 – 108mm x 108mm x 54mm, 5130 108067108 – 108mm x 108mm x 67mm, 5130 108076108 – 108mm x 108mm x 76mm, 5130 133108133 – 133mm x 133mm x 108mm, 5130 159108159 – 159mm x 159mm x 108mm. 5301 – Stop End: 5301 067000000 – 67mm, 5301 067000000L – 67mm, 5301 076000000 – 76mm, 5301 108000000 – 108mm, 5301 133000000 – 133mm, 5301 159000000 – 159mm. 4270G – Female Straight Connector: 4270G067020000 – 67mm x 2.1/2” BSP (F). 4243G – Male Straight Connector: 4243G067020000 – 67mm x 2.1/2” BSP (M) 4243G076024000 – 76mm x 3” BSP (M), 4243G108032000 – 108mm x 4” BSP (M).

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of packaged plate heat exchangers comprising of stainless steel plates with EPDM gaskets. The products are supplied with twin primary circulation pumps, a secondary circulation pump, 3 port control valve and a control panel with full Mod BUS BMS connectivity. Maximum working pressure - Primary and Secondary circuits 10.0 bar. Maximum operating temperature 85°C.

Section:

1350 Heat Exchangers

Size:

25, 30, 35 and 38 Series: Primary circuit: 1¼” BSP (F) inlet x 1¼” BSP (M) outlet. Secondary circuit: 1¼” BSP (M) inlet x 1¼” BSP (F) outlet. 40 Series: Primary circuit: 1½” BSP (F) inlet x 1½” BSP (M) outlet. Secondary circuit: 1½” BSP (F) inlet x 1½” BSP (F) outlet. 50 Series: Primary circuit: 2” BSP (M) inlet/outlet. Secondary circuit: 2” BSP (F) inlet/outlet. 28, 31 & 39 Series 32mm threaded connection size

Marking:

CHWS logo on front of control unit. CHWS logo serial number and model number on label on back plate.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Propak Thermal range: 25 Series: 2507, 2509, 2511, 2513, 2515. 30 Series: 3013, 3017, 3019, 3021, 3023, 3025, 3029, 3033, 3039, 3045. 35 Series: 3531, 3535, 3539, 3543. 38 Series: 3811, 3821, 3829, 3835, 3843, 3851, 3859, 3867, 3875. 40 Series: 4015, 4017, 4019, 4021, 4029, 4035, 4041. 50 Series: 5021, 5025, 5031, 5035, 5039, 5043, 5049. Models added November 2025 28 Series 2805, 2807, 2809, 2811, 2815, 2819, 2823, 2829 31 Series 3129, 3133, 3137, 3143, 3149 39 Series 3925, 3929, 3935, 3941, 3949

Approval Holder:

Commercial Hot Water Solutions Ltd.

Company Name

Commercial Hot Water Solutions Ltd.

Address

Unit 71/72 Gazelle Road, Weston Industrial Estate, Weston Super Mare, North Somerset

Postcode

BS24 9ES

View All Listings by this Company

‘Gladiator’ range of in-line water meters with polyamide bodies and EPDM rubber `O` rings. The meters incorporate a plastic strainer. Maximum working pressure 16.0 Bar

Non-metallic materials and components comply with BS6920 at 50°C

Section:

1505 Water Meters

Size:

¾” BSP M Inlet x Outlet

Marking:

Arad logo, Pressure, CE and other information on faceplate Flow arrow on body

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

PD Gladiator DN 15 110mm PD Gladiator DN 15 115mm PD Gladiator DN 15 134mm PD Gladiator DN 15 165mm PD Gladiator DN 15 170mm PD Gladiator DN 15 190mm PD Gladiator DN 20 110mm PD Gladiator DN 20 115mm PD Gladiator DN 20 134mm PD Gladiator DN 20 165mm PD Gladiator DN 20 170mm PD Gladiator DN 20 190mm

Approval Holder:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company

Manufacturer:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company

Range of in-line ultrasonic water meters with DZR brass bodies and a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

1505 Water Meters

Size:

DN15 = ¾” BSP (M), DN20 = 1” BSP (M), DN25 = 1¼” BSP (M), DN32 = 1½” BSP (M).

Marking:

Hydrus, Saudi Meters Company, DN, PN, technical data and product information on meter face.

Installation Requirements:

R001

Expiry date:

31/01/2029

Model:

Hydrus range: 3092801 (DN15), 3092646 (DN20), 3092804 (DN25), 3092805 (DN32).

Approval Holder:

SAUDI METERS COMPANY

Company Name

SAUDI METERS COMPANY

Address

2nd Industrial Area-4719, Riyadh 14331-7141, Unit # 14, Kingdom of Saudi Arabia

View All Listings by this Company

Manufacturer:

SAUDI METERS COMPANY

Company Name

SAUDI METERS COMPANY

Address

Street # 173, 2nd Industrial Area, P.O. Box 185, Riyadh 11383, Saudi Arabia

View All Listings by this Company