Directory Search Results

Fittings Materials
Print List

#2210513

'Art-Coat'. Factory applied, colourless (transparent) PTFE based surface treatment coating. Apply as per manufacturer's instructions 'revision 3' dated 16-03-2020. Cure for 45 minutes@55-60°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2210513
Expiry date:
31/10/2027
Approval Holder:
Ar-tex SpA
Company Name
Ar-tex SpA
Address
Via Rasetti 12 24060 Viadanica Bergamo
Country
Italy
Phone
+39 035 939 711
General Email
info@ar-tex.it

View All Listings by this Company

Print This Approval

#2104564

`RVK JDP01`. Factory applied, blue coloured epoxy coating. Apply and cure as per manufacturer's technical information document reference 'RVK-PRD-DI-002, issue #1' dated 2017. For use with water up to 85°C.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2104564
Expiry date:
30/04/2026
Approval Holder:
Mohammed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Company Name
Mohammed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Address
King Abdullah Economic City, Industrial Valley Plot No. 1B-20
Country
Saudi Arabia

View All Listings by this Company

Print This Approval

#2210517

'Teadit NA1006'. Green coloured NBR/fibre gasket material manufactured by mixing and calendaring. For use with water up to 65°C.

Section:
5075 Fibre
Section Subtitle:
These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.
WRAS Approval Number:
2210517
Expiry date:
31/10/2027
Approval Holder:
Teadit International Produktions GmbH
Company Name
Teadit International Produktions GmbH
Address
Europastrasse 12, 6322 Kirchbichl
Country
Austria

View All Listings by this Company

Print This Approval

#2205570

'Grivory HT1V-5 FWA grey L2172.5'. Grey coloured, injection moulded PA6I/6T-GF50 material. For use with water up to 85°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2205570
Expiry date:
31/05/2027
Approval Holder:
EMS-CHEMIE AG
Company Name
EMS-CHEMIE AG
Address
Via Innovativa 1, CH-7013 Domat/Ems
Country
Switzerland
Phone
+41 81 632 78 78
General Email
welcome@emsgrivory.com

View All Listings by this Company

Print This Approval

#2212509

'Tecacomp PEEK 450 natural (1015088)'. Beige coloured, extruded PEEK material. For use with water up to 85°C.

Section:
5220 Polyether Ether Ketone
Expiry date:
31/12/2027
Approval Holder:
Ensinger GmbH.
Company Name
Ensinger GmbH.
Address
Rudolf Diesel Strasse 8, 71154 Nufringen, Germany

View All Listings by this Company

Print This Approval

#2210515

'Mais' pipe. Black coloured (with blue external stripes), extruded, PE100 HDPE pipe. For use with water up to 65°C.

Section:
5240 Polyethylene
Section Subtitle:
Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:
2210515
Expiry date:
31/10/2027
Approval Holder:
Saudi Mais Co. for Irrigation Systems
Company Name
Saudi Mais Co. for Irrigation Systems
Address
2nd Industrial Area, Al Khaj Road, PO Box 42801, Riyadh 11551
Country
Saudi Arabia
Phone
+9661 12652300
General Email
irrigation@mais.com.sa

View All Listings by this Company

Print This Approval

#2210519

'Filter 99 3/8 349971 Dark Grey & Filter 99 ½ 349970 Light Grey'. Grey coloured, injection moulded HDPE filters. For use with water up to 23°C.

Section:
5240 Polyethylene
Section Subtitle:
Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:
2210519
Expiry date:
31/10/2027
Approval Holder:
Siamp
Company Name
Siamp
Address
4 Quai Antoine Premier BP 219 MC 98007
Country
Monaco
Phone
Tel: +377 9315 5375 Fax: +377 9205 7104
General Email
info@siamp.co.uk

View All Listings by this Company

Print This Approval

#2210516

'EC-6509-A'. Black coloured, compression moulded EPDM rubber material. Shore hardness 65. Tested in-radius size 0.5mm. For use with water up to 80°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210516
Expiry date:
31/10/2027
Approval Holder:
DiaCom Corporation
Company Name
DiaCom Corporation
Address
5 Howe Drive, Amherst, NH 03031
Country
USA
Phone
(001) 603-880-1900
General Email
dereks@diacom.com

View All Listings by this Company

Print This Approval

#2302507

'WN1743 BLK O-rings & gaskets'. Black coloured, injection moulded NBR 'O' rings & gaskets. Shore hardness 50. The 'O' rings have a tested in-radius size of 1.5mm. The gaskets have a tested in-radius size of 0.7mm. For use with water up to 23°C.

Section:
5390 Rubbers
Section Subtitle:
Nitrile (Acrylonitrile Butadiene) - components.
WRAS Approval Number:
2302507
Expiry date:
29/02/2028
Approval Holder:
Superior Seals Ltd.
Company Name
Superior Seals Ltd.
Address
Nimrod Way, Ferndown Industrial Estate, Ferndown, Dorset
Postcode
BH21 7SH
Country
UK
Phone
01202 854 300
General Email
sales@superiorltd.com

View All Listings by this Company

Print This Approval

#2206540

'NB751359C'. Black coloured, compression moulded NBR rubber. Shore hardness 71. Tested in-radius size 1.0mm. For use with water up to 23°C. From December 2023, the material is suitable for use with water up to 85°C.

Section:
5395 Rubbers
Section Subtitle:
Nitrile (Acrylonitrile Butadiene) material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2206540
Expiry date:
30/06/2027
Approval Holder:
Fannteer Corporation
Company Name
Fannteer Corporation
Address
2F, No. 77, Zhouzi Street, Neihu District, Taipei City 114680
Country
Taiwan
Phone
+886 2 2577 4691
General Email
info@fannteer.com.tw

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 407 of 1161

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.