Range of multistage centrifugal pumps with stainless-steel housings, stainless-steel impellers and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250902720

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN25 - DN200 flanged.

Marking:

Dooch, model, serial number and technical info on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

30/09/2030

Proviso:

The discharge from the drain core must be made via a type AA, AB or AD air gap, or in accordance with EN 1717.

Model:

XRLNa-b-c-d Where: XRL = model. With N = Wetted metallic material in SUS316L, Without N = Wetted metallic material in SUS304. a = Rated flow in m³/h (1 – 255). DN25 = 1-3. DN32 = 4-5. DN40 = 10. DN50 = 15-20. DN65 = 32. DN80 = 45. DN100 = 64 or 95. DN150 = 125-155. DN200 = 185-255. b = Number of impellers (stages 1 – 36). DN25 & DN32 models with 1 – 36 stages. DN40 models with 1 – 22 stages. DN50 models with 1 – 17 stages. DN65 models with 1 – 14 stages. DN80 models with 1 – 13 stages. DN100 models with 1 – 8 stages. DN150 models with 1 – 10 stages. DN200 models with 1 – 8 stages. c = Number of cutting impellers (0 – 3). (Note: c can be omitted when c = 0.) d = DN size (DN25 – DN200). (Note: d can be omitted.) E.g., XRL32-7-2-DN65 denotes: Pump is made of SUS304, rated flow 32 m³/h, 7 impellers, 2 cutting impellers and size DN65.

Approval Holder:

SHANGHAI SINO-KOREA DOOCH PUMP MFG. CO., LTD

Company Name

SHANGHAI SINO-KOREA DOOCH PUMP MFG. CO., LTD

Address

No 239 Zhangliantang Rd Liantang Ind Park Qingpu District Shanghai City China

View All Listings by this Company

Manufacturer:

ZHONGHAN DOOCH PUMP(HUZHOU)CO., LTD.

Company Name

ZHONGHAN DOOCH PUMP(HUZHOU)CO., LTD.

Address

NO 669 DAYANG ROAD KANGSHAN STREET HUZHOU ZHEJAING CHINA

View All Listings by this Company

CM(E) range of electronically operated pumps available in stainless steel, (‘EN 1.4301/AISI304’ or ‘EN 1.4401 /AISI316’) and cast iron. The pumps are supplied with Sic-Sic mechanical shaft seals and FKM or EPDM seals. Maximum operating parameters: Cast iron models: Maximum working pressure 6.0 bar @ 90°C. Maximum working pressure 10.0 bar @ 40°C. Stainless steel models (not self-priming variants): Maximum working pressure 10.0 bar @ 99°C. Maximum working pressure 16.0 bar @ 90°C. Stainless steel self-priming models (CM(E) 1, 3 & 5 (AISI 304) only): Maximum working pressure 10.0 or 16.0 bar @ 60°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251007701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” - 2” BSP (F) or NPT (F) inlet and outlet.

Marking:

Grundfos and Grundfos logo, type, model, manufacturing country and technical information on adhesive labels either on the terminal box or fan cover. Grundfos and Grundfos logo on the terminal box or fan cover.

Installation Requirements:

R001 R415

Expiry date:

31/10/2030

Model:

CM(E)1, CM(E)3 and CM(E)5: CM(E)1, cast iron / AISI304 2 – 8 stages. CM(E)3, cast iron / AISI304 2 – 8 stages. CM(E)5, cast iron / AISI304 2 – 8 stages. CM(E)1, AISI316 2 - 14 stages. CM(E)3, AISI316 2 - 14 stages. CM(E)5, AISI316 2 - 13 stages. CM(E)10 CM(E)15 and CM(E)25: CM(E)10, cast iron / AISI304 1 – 5 stages. CM(E)15, cast iron / AISI304 1 – 4 stages. CM(E)25, cast iron / AISI304 1 – 4 stages. CM(E)10, AISI316 1 – 8 stages. CM(E)15, AISI316 1 – 4 stages. CM(E)25, AISI316 1 – 4 stages. Self-priming models: CM(E)1, AISI304 3 – 6 stages (S or O) CM(E)3, AISI304 3 – 6 stages (S or O) CM(E)5, AISI304 3 – 7 stages (S or O) Model key: CM/CME X1-X2 X3 X4-X5-X6-X7-X8 X9 X10 X11 X11-X12-X13-X14 Where: CM = Centrifugal Modular. CME = Centrifugal Modular with integrated frequency converter. X1 = Rated flow rate at 50 Hz (m³/h): 1-25. X2 = Number of impellers: 1-14. X3 = Pump Versions: A - Basic Version. E: Pumps with certificates/approvals. O: Self-priming version (maximum suction lift 8 metres) (Only available on CM(E) 1, 3 & 5 stainless steel (AISI304) models). S: Self-priming version (maximum suction lift 4 metres) (Only available on CM(E) 1, 3 & 5 stainless steel (AISI304) models). X4 = Pipe connection: R: Rp (ISO 7/1). S: Internal NPT thread. X5 = Material in contact with pump media: A: inlets and outlets parts EN-GJL-200, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. G: Sleeve, Pump shaft + Impellers and chambers EN 1.4401/AISI 316. I: Sleeve, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. X6 = Rubber parts in pump (excluding neck ring and shaft seal): E: EPDM. V: FKM. X7 = Shaft seal: A: O-ring seal with fixed driver. X8 = Material of rotating seal face: Q: Silicon Carbide (SIC). X9 = Material of stationary seal face: Q: Silicon Carbide (SIC). X10 =Material of secondary seal: E: EPDM. V: FKM. X11 = Supply voltage (electrical characteristics - not relevant for the WRAS approval): A/B/B1/B2/C1/E/E1/F/G/H/J/O/S/T/U/V/X. X12 = Motor information(electrical characteristics - not relevant for the WRAS approval): A/B/C/D/EF/G/H/I/J. X13 = Mains plug (electrical characteristics - not relevant for the WRAS approval): A/B/C/D. X14 = Sensor (electrical characteristics - not relevant for the WRAS approval): N: No sensor. Example: CM 10-3 A-R-I-E-A Q Q E C1-A-A-N

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of brass shower arms and plastic shower heads (various finishes) incorporating EPDM seals and ‘O’-rings, silicone seals and spray insert. The 26 469 xxx model is ceiling mounted & 26 470 xxx model is wall mounted. Maximum operating temperature 60°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250808004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Hansgrohe on the body.

Installation Requirements:

R001 R040

Expiry date:

31/08/2030

Model:

26 469 xx0 Hansgrohe Raindance select S – Overhead shower 240 2 jet EcoSmart with ceiling connector. 26 470 xx0 Hansgrohe Raindance select S – Overhead shower 240 2 jet EcoSmart with shower arm. 26 469 400 Hansgrohe Raindance select S – Overhead shower 240 2 jet EcoSmart with shower arm.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of chromium plated stainless steel or brass interlocked shower hoses with an optional PVC outer layer. Incorporating either a PVC or TPE inner hose and EPDM gaskets. Maximum operating temperature 60°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2106064

Note:

Open outlet use only.

Size:

½” BSP Captive nut inlet x outlet.

Marking:

Intatec logo on conical nut.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

IX100005CP - 1.5M BRAIDED IX100004CP - 1.5M SMOOTH 30003CPX - 1.5M BRAIDED IX100006CP - 2M BRAIDED 30006CPX - 2M BRAIDED

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Range of chromium plated stainless steel or brass interlocked shower hoses with an optional PVC outer layer. Incorporating either a PVC or TPE inner hose and EPDM gaskets. Maximum operating temperature 60°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2106065

Note:

Open outlet use only.

Size:

½” BSP Captive nut inlet x outlet.

Marking:

WRAS, DTC15 and date of manufacture (YY) on captive nut.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

HOS2.0CPS03

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company