In-line plastic flow regulator housed within a brass body (chrome plated) or stainless steel body (HL2024 Cradle model only) incorporating a plastic strainer and EPDM ‘O’-rings. HL2024 Inline 1P BSP threaded models also have NBR/fibre gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2005044

Size:

HL2024 Inline 1P models: ½” BSP (F) inlet to ½” BSP (M) outlet, ½” BSP (M) inlet to ½” BSP (F) outlet, 15mm compression inlet/outlet, ¾” BSP (M) inlet/outlet. HL2024 Connect: ¾” BSP (F) inlet to ¾” BSP (M) outlet. HL2024 Connect-S 7.5: ½” BSP (M) inlet offset to ¾” BSP (M) outlet. HL2024 Inline Cartridge 3P & HL2024 Cradle 3P: ½” BSP (M) inlet/outlet machined to accept a 15mm compression nut and olive (not supplied or considered part of the approval listing).

Marking:

HL2024 Connect model 3/4": HL2024 (brand of HGP), flow arrow and Kiwa engraved on body. HL2024 Connect-S 7.5 1-2 3-4 model: HL2024 (brand of HGP) and flow rate embossed on body. All other models: HL2024 (brand of HGP), flow arrow & flow rate on adhesive label on body. Models HL2024 Control Flow 1P & HL2024 Control Flow 3P - HL2024 (brand of HGP), flow arrow & flow rate on adhesive label on body. HL2024 Thermastream model - HL2024 (brand of HGP), flow arrow and Kiwa engraved on body. HL2024 Thermastream S7 model - HL2024 (brand of HGP) and flow rate embossed on body.

Installation Requirements:

R001

Expiry date:

31/05/2025

Model:

HL2024 Inline 1P. HL2024 Connect. HL2024 Connect-S 7.5. HL2024 Inline Cartridge 3P. HL2024 Cradle 3P. Models added August 2020: HL2024 Control Flow 1P 1/2‘‘ f-m HL2024 Control Flow 1P 1/2‘‘ m-f HL2024 Control Flow 1P 15mm HL2024 Control Flow 1P 3/4‘‘ HL2024 Thermastream 3/4‘‘ HL2024 Thermastream S7.5 1/2’’-3/4’’ HL2024 Control Flow 3P 15mm

Approval Holder:

HaGePe International B.V (HGP International)

Company Name

HaGePe International B.V (HGP International)

Address

Huizermaatweg 27-2 1273 NA Huizen

Country

Netherlands

View All Listings by this Company

Manufacturer:

HaGePe International B.V (HGP International)

Company Name

HaGePe International B.V (HGP International)

Address

Huizermaatweg 27-2 1273 NA Huizen

Country

Netherlands

View All Listings by this Company

Shock arrestor with a carbon steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

Size:

¾” BSP (M)

Marking:

Aquaystem logo (‘Aquasystem’, where the ‘q’ is a silhouette of an expansion vessel), and other technical information on adhesive label on body. (Aquasystem is a brand of Zilio Industries Spa).

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

AR2

Product Images

Approval Holder:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

General Email

info@zilioindustries.com

View All Listings by this Company

Shock arrestors with a carbon steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

Size:

¾” BSP (M)

Marking:

Aquaystem logo (‘Aquasystem’, where the ‘q’ is a silhouette of an expansion vessel), and other technical information on adhesive label on body. (Aquasystem is a brand of Zilio Industries Spa).

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

XVES050010:2L AQUASYSTEM POTABLE WATER EXPANSION VESSEL 3.0 BAR, XVES050011:2L AQUASYSTEM POTABLE WATER EXPANSION VESSEL 3.5 BAR & XVES050012:2L AQUASYSTEM POTABLE WATER EXPANSION VESSEL 4.1 BAR

Manufacturer:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

View All Listings by this Company

Biofilm and water quality monitor incorporating a stainless-steel body and silicon seals. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2209020

Size:

¾” female BSP inlet x ¾” male BSP outlet.

Marking:

Sol, Model and product information on adhesive label on side of casing.

Installation Requirements:

R001

Expiry date:

30/09/2027

Model:

Solution MX1

Product Images

Approval Holder:

Waterman Environmental Group

Company Name

Waterman Environmental Group

Address

SOLmicroTEK Ltd., Cotswold Business Centre, 2, AP Ellis Road, Upper Rissington, Gloucestershire

Postcode

GL54 2QB

View All Listings by this Company

Flow meter with stainless steel body. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1530 Miscellaneous Fittings

Size:

DN100 Flanged

Marking:

Pydro on body. Pydro, Model, Serial no, size and other technical information on data plate on body

Installation Requirements:

R001

Expiry date:

30/06/2028

Model:

PT-1 Multi Sensing Device

Product Images

Approval Holder:

PYDRO GMBH

Company Name

PYDRO GMBH

Address

FRIEDRICH-BARNEWITZ-STR. 7 DE-18119 ROSTOCK-WARNEMÜNDE

View All Listings by this Company

Manufacturer:

PYDRO GMBH

Company Name

PYDRO GMBH

Address

FRIEDRICH-BARNEWITZ-STR. 7 DE-18119 ROSTOCK-WARNEMÜNDE

View All Listings by this Company

Leak detection system, comprising of a flow sensor with a stainless-steel body incorporating a motorised spherical valve, with a stainless-steel ball. Please note that claims of leak detection have not been verified by WRAS. Maximum working pressure 15.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

250402049

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) inlet and outlet.

Marking:

HLP-4 on valve body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

9015-B.

Approval Holder:

Harrison Land & Property Ltd.

Company Name

Harrison Land & Property Ltd.

Address

11-12 Hallmark Trading Centre, Fourth Way, Wembley, Middlesex

Postcode

HA9 0LB.

Country

United Kingdom

View All Listings by this Company

Self-closing hand spray with a stainless-steel body. The inlet incorporates a flow regulator and an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection). Maximum working pressure 5 bar. Max operating temperature 60°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

241004710

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2” BSP (M)

Marking:

T-Safe on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

02-803200 Kitchen Spray filter

Product Images

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Range of circulating pumps, with plastic or stainless steel bodies (cast EN 1.4308 or plate EN 1.4301) and a plastic impeller. Maximum working pressure 10.0 bar (stainless steel bodied pumps), 3.0 bar (plastic bodied pumps). Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2012924

Size:

Composite (plastic body) (15 models): 1” BSP (M). Stainless steel body (25 models): 1½” BSP (M).

Marking:

Grundfos and Grundfos logo, type, model, production no. and other technical info on adhesive label on end of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

31/12/2025

Model:

Composite (plastic body): UPM2 15-** CIL2. Stainless steel body: UPMM 25-** N 180. UPML 25-** N 180. UPMXL 25-** 180 N. UPM GEO 25-** N 180. UPML GEO 25-** 180 N. UPMXL GEO 25-** 180 N. SOLAR PML 25-** 180 N. ** -stands for the lifting height of the pump in dm, that can be various 2 or 3 digit numbers

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

‘e-SH’ range of centrifugal booster pumps with a blue polymer coated stainless steel body, stainless steel impeller and EPDM ‘O’-rings. Maximum working pressure 12.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2110004

Size:

DN50-100 flanged inlets. DN25-80 flanged outlets.

Marking:

LOWARA (brand of Xylem), CE, maximum temperature and other technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2026

Model:

e-SH range of pumps Example model code: ESHF 65-160/110A/P25VSNB ESH = Pump series F = Coupling type (blank - bare shaft, E - extended shaft, S - Stub shaft, F - Frame mounted or C - spacer coupling frame mounted). [ ] = motor operation (blank [ ] = standard asynchronous motor, [H] = equipped with Hydrovar, [X] = other drives). 65 = discharge port diameter mm (ranges from DN25-80). 160 = impeller diameter mm (ranges from 125-250). 110 = Motor power (2-3 digits - kW x 10 or D + actual impeller diameter (mm) (bare shaft version)). A = Trimmed impeller (blank - not trimmed, A - trimmed diameter that doesn’t maximise motor power type, X - trimmed diameter to meet customer required duty point). P = motor type (/P, /S, /W, /X). 2 = No. of poles (2 or 4). 5V = electrical voltage and frequency (5H, 5R, 5V, 5P, 5S, 5T, 5W, 6F, 6E, 6P, 6R, 6V, 6U, 6N, 6T). S = Casing material (Stainless steel 1.4404). N = Impeller material (S - Fabricated stainless steel 1.4404 or N - Cast stainless steel 1.4408). B = Mechanical seal option: Ceramic/Carbon/EPDM.

Product Images

Approval Holder:

Xylem Water Solutions UK Ltd

Company Name

Xylem Water Solutions UK Ltd

Address

Private Road 1 Colwick Industrial Estate Colwick

Postcode

NG4 2AN

Country

Nottingham

View All Listings by this Company

Manufacturer:

Xylem Service Italia Srl., Xylem Service Hungary Kft. & Xylem Water Solutions Polska Sp. z o. o.

Company Name

Xylem Service Italia Srl., Xylem Service Hungary Kft. & Xylem Water Solutions Polska Sp. z o. o.

Address

View All Listings by this Company

‘Alpha’ range of circulator pumps with either a composite (plastic) or stainless steel body, plastic impellor and EPDM ‘O’-rings. The Alpha 1 model B CIL3 has a black motor housing. The Alpha 1 model B and the Alpha 2 model E stainless steel body models have either a black or red motor housing. All other models have a red motor housing. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2210907

Size:

Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1¼” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and model on side of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

31/10/2027

Model:

ALPHA1 **1-**2 N ***3 model B & ALPHA2 **1-**2 N ***3 model B/C/D/E. ALPHA1 **1-**2 CIL3 model B Where: **1 = size of inlet/outlet connection: 20 = 1 ¼”, 15 & 25 = 1 ½”, 32 = 2”. **2 = maximum head (dm): 40, 45, 50, 50/60, 60 & 80. N denotes stainless steel body. CIL3 denotes pump with composite (plastic body). ***3 = port to port length: 130, 150 & 180mm. (Note CIL3 model does not include a port length as it is only available in one size: 130mm). B/C/D/E indicates electronic options. For example: ALPHA2 25-50 N 130 model B. Alpha 2 pump type with 1 ½ BSP (M) inlet/outlet, 50 maximum head (dm), stainless steel pump housing and 130mm port to port length.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company