Range of drain off taps incorporating DZR brass bodies, non-rising spindle operating mechanism and EPDM ‘O’-rings and seat washer. FIG 371 range incorporates a lockshield mechanism and the FIG 370 range incorporates a key operated mechanism. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of shower hoses incorporating a PVC inner liner with corrugated metal outer casing, EPDM washers and stainless steel strainer. Maximum operating temperature 60°C.
Range of interlocked, chrome plated, stainless-steel shower hoses incorporating EPDM washers and a polyethylene liner. Maximum operating temperature 70°C.
Range of flexible hoses assemblies incorporating a braided outer with TPSiV liner and various brass end connections. Incorporating NBR or EPDM washers and ‘O’-rings. Maximum operating temperature 85°C.
Range of PET (Polyethylene terephthalate) braided flexible hoses incorporating HDPE liner and EPDM ‘O’-rings. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C Models added in January 2022: Maximum operating temperature 70°C.
Range of EPDM or PEX inner, stainless steel flexible hoses with EPDM gaskets. Maximum working temperature is 70°C.
‘TAQ PEX’ range of PEX lined flexible hose assemblies with either stainless steel braiding or grey polymeric (PET - Polyethylene terephthalate) braiding (ACB suffix models). Models have either EPDM ‘O’-rings and/or EPDM or silicone washers (depending on end connection). Models are also available with an optional washer incorporating a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of stainless steel braided EPDM lined hose assemblies with EPDM O-rings and some models incorporate a servicing valve. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.
Shower kit consisting of a wall mounted thermostatic blending valve incorporating a brass body (chrome plated), quarter turn ceramic disc headwork controlling the flow, the temperature is controlled via a thermostatic cartridge which incorporates a manual override button and dome type operating members. Each inlet incorporates a combined EPDM washer with stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with shower hose, shower handset, riser rail. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
T-type thermostatic mixing valve with brass body, EPDM ‘O’-rings and stainless-steel strainers. The inlets incorporate stainless-steel strainers and an approved check valve cartridge verified by test (as suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wafer and fully lugged butterfly valves (lever or handwheel operation) with a cast iron body (blue epoxy coated), EPDM seat and stainless steel disc. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of handwheel & gear operated butterfly valves with blue epoxy coated ductile iron bodies and discs and EPDM rubber seat. Maximum working pressure 16.0 bar. Cold water use only. Maximum operating temperature 85°C (from Sept 2021)
Range of lugged butterfly valves with blue epoxy coated ductile iron bodies and nickel plated ductile iron discs and an EPDM sealing ring. D71XLK models are lever operated, the D371XLK are handwheel operated. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of handwheel & gear operated butterfly valves with blue epoxy coated ductile iron bodies and discs and EPDM rubber seat. Maximum working pressure 16.0 bar. Cold water use only.
Combined pressure and temperature relief valves with DZR brass bodies, stainless steel springs, nylon coated probe, EPDM diaphragm and silicone seat disc. The valves incorporate lever easing gear. The valves have a factory pre-set pressure of 7.0 or 10.0 bar (see model). Maximum operating temperature 85°C.
Combined pressure and temperature relief valves with DZR brass bodies, stainless steel springs, nylon coated probe, EPDM diaphragm and silicone seat disc. The valves incorporate lever easing gear. The valves have a factory pre-set pressure of 7.0 or 10.0 bar (see model). Maximum operating temperature 85°C.
Range of combined pre-set temperature and pressure relief valves incorporating Bronze bodies, DZR brass seat and plunger, EPDM ‘O’-rings, PTFE seal and silicone diaphragm. The valves incorporate a manually operated lever easing gear. The valves are factory pre-set between 0.4 bar and 12.5 bar. Maximum operating temperature 90°C.
Range of ‘J2 10 series’ of equilibrium float valves with cast iron (epoxy coated) bodies and EPDM seals. Available with either standard or extended arms. Maximum working pressure 10 bar. Cold water use only.
Manually operated regulating valves with gunmetal bodies, controlled via a non-rising spindle. Valves incorporate PTFE gasket and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of flow control valves with blue epoxy coated ductile Iron bodies and EPDM ‘O’-rings. Auxiliary components include stainless steel tube with fittings and ball valves. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Page 5 of 109
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
