Directory Search Results

Print List

#240402050

Range of concealed rough-in sets with brass bodies, intended for use in conjunction with trim and finish sets. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:
1530 Miscellaneous Fittings
Size:
½” BSP (F)
Marking:
Axor on adhesive label
Installation Requirements:
R001 R040
Expiry date:
30/04/2029
Model:
13 129 180 45 442 180 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240402065

Range of submersible pressure sensors and hydrostatic transmitters (supplied in lengths up to 1000m). Cold water use only.

Section:
1530 Miscellaneous Fittings
Size:
Ø22mm or 32mm (see model).
Marking:
VEGA, VEGAWELL 52, model number and other product information on label connected to cable.
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
VEGAWELL 52 WL52.XX α A β γ I δ ε ζ X Where: XX :- Approval Blank/without (not applicable to model seeking WRAS approval). α :- Fastening / Material X4 :- Without GE :- Adjustable screw connection for suspension cable G¾ PN3, ISO228-1 / 316L. GC :- Adjustable screw connection for suspension cable G1 PN3, ISO228-1 / 316L. GD :- Adjustable screw connection for suspension cable 1NPT PN3, ASME B1.20.1 / 316L. GA :- Adjustable screw connection for suspension cable G1½ PN3, ISO228-1 / 316L. GB :- Adjustable screw connection for suspension cable 1½NPT PN3, ASME B1.20.1 / 316L. Version / Process temperature A :- Suspension cable PE / -20...+60°C β :- Length of suspension cable K :- 6m PE suspension cable. L :- 12m PE suspension cable. M :- 27m PE suspension cable. T :- Individually selected length PE suspension cable. γ :- Transmitter material / Diameter V :- 316l / 22mm. D :- Duplex (1.4462) / 32mm. Sealing concept / Wetted seal I :- Double / EPDM (A+P 70.10-02), EPDM (70.503-00) δ :- Measuring rate A :- rel. / 0 … +0.1 bar (0 … + 10kPa). B :- rel. / 0 … +0.2 bar (0 … + 20kPa). C :- rel. / 0 … +0.4 bar (0 … + 40kPa). D :- rel. / 0 … +1.0 bar (0 … + 100kPa). E :- rel. / 0 … +2.5 bar (0 … + 250kPa). F :- rel. / 0 … +5.0 bar (0 … + 500kPa). G :- rel. / 0 … +10 bar (0 … + 1,000kPa). H :- rel. / 0 … +25 bar (0 … + 2,500kPa). ε :- Electronics C :- Two-wire 4…20mA. D :- Two-wire 4…20mA/HART + Four-wire PT100. ζ :- Accuracy class 1 :- 0.2%, 2 :- 0.1%. Transmitter option X :- without.
Product Images

Approval Holder:
VEGA Grieshaber KG
Company Name
VEGA Grieshaber KG
Address
Am Hohenstein 113 Schiltach
Postcode
77761
Country
Germany
General Email
info.de@vega.com

View All Listings by this Company
Manufacturer:
VEGA Grieshaber KG
Company Name
VEGA Grieshaber KG
Address
Am Hohenstein 113 Schiltach
Postcode
77761
Country
Germany
General Email
info.de@vega.com

View All Listings by this Company

Print This Approval


#240402714

‘Right Pump’ range of single and twin pumps with plastic bodies. The universal models incorporate a non-return valve on the outlet(s) of the pump body (x2 for the RP50TU model) and an expansion vessel. The twin models incorporate a bypass tube between each side of the pump. The inlet(s) of the pump body incorporate(s) a combined EPDM washer and stainless-steel strainer. The inlet and outlet hoses incorporate an isolation valve on the pushfit connection. The push fit connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 1.5 to 3.6 bar (see model). Maximum operating temperatures 60°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240402714
Size:
RP50PT model: Stainless steel braided EPDM lined flexible hose assemblies with 15mm pushfit end connections. All other models: Stainless steel braided EPDM lined flexible hose assemblies with 22mm pushfit end connections.
Marking:
Salamander logo, model name and product information on label.
Installation Requirements:
R001 R150 R415
Expiry date:
30/04/2029
Model:
RP50PT - 1.5 Bar Twin Pump (Positive), RP75PT - 2.2 Bar Twin Pump (Positive), RP100PT - 3.0 Bar Twin Pump (Positive), RP50TU - 1.5 Bar Twin Pump (Universal), RP75TU - 2.2 Bar Twin Pump (Universal), RP100TU - 3.0 Bar Twin Pump (Universal), RP55SU - 1.5 Bar Single Pump (Universal), RP80SU - 2.4 Bar Single Pump (Universal), RP120SU - 3.6 Bar Single Pump (Universal). Where: RP = (Right Pump). 50/55 = 1.5 Bar, 75 = 2.2 Bar, 80 = 2.4 Bar, 100 = 3.0 Bar, 120 = 3.6 Bar. P = Positive (No expansion vessel). U = Universal (With expansion vessel). T = Twin. S = Single.
Product Images

Approval Holder:
Salamander Pumps
Company Name
Salamander Pumps
Postcode
SR5 3XE
Country
United Kingdom
Phone
0191 535 4528
General Email
lewisw@salamanderpumps.co.uk

View All Listings by this Company
Manufacturer:
Salamander Pumps
Company Name
Salamander Pumps
Postcode
SR5 3XE
Country
United Kingdom
Phone
0191 535 4528
General Email
lewisw@salamanderpumps.co.uk

View All Listings by this Company

Print This Approval


#240404710

Range of 3 or 4 stage permanent magnet variable frequency pumps, with stainless steel bodies, plastic impellers (3 stage model) or stainless steel impellers (4 stage models). Product incorporates an internal shock arrestor. Maximum working pressure 6.5 Bar. Maximum operating temperature 75°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240404710
Size:
GT prefix, T42 & T50 models: 1” BSP (F). T8-50 & T8-60 models: 2” BSP (F).
Marking:
Geocon, model no., temperature and other technical information on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
30/04/2029
Model:
3 stage models: GT40 (0.37kW), GT46 (0.55kW), GT55 (0.68kW), GT60 (0.88kW), T42 (0.68kW), T50 (0.85kW). 4 stage models: T8-50 (1.5kW), T8-60 (2.2kW).
Product Images

Approval Holder:
Geocon Global Co., Ltd.
Company Name
Geocon Global Co., Ltd.
Address
2F., No. 25-1, Minle St., East Dist., Chiayi City 600
Country
Taiwan

View All Listings by this Company

Print This Approval


#240408701

Range of vertical submersible multistage pumps with either threaded or flanged end connections. Maximum operating temperature 23°C. Open outlet use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240408701
Size:
See models.
Marking:
Manufacturers logo and model on data plate.
Installation Requirements:
R001 R415
Expiry date:
30/04/2029
Model:
E6P – 3” BSP (F) E6RX – 2.1/2” BSP or 3” BSP (F) E6SX – 3” or 4” BSP (F) E6NVX - 2.1/2” BSPT, 3” BSPT or 4” BSPT (F) E8P – 5” BSP (F) E8R – 3” BSP (F) E8PX – 5” BSP (F) E8NVX – 5” BSPT (F) E10S – 150mm Ø flanged connection E10R – 4” BSP (F) E10PX – 6” BSPT (F) E12S - 150mm Ø flanged connection E12PX – 221mm Ø flanged connection E14S – 200 / 230mm Ø flanged connection E16S.P – 247mm Ø flanged connection E18S – 230mm Ø flanged connection E20S.P. – 260mm Ø flanged connection E22S.P. – 330mm Ø flanged connection

Approval Holder:
Caprari S.p.A
Company Name
Caprari S.p.A
Address
Via Emilia, Ovest 900, 41123 Modena
Country
Italy

View All Listings by this Company
Manufacturer:
Caprari S.p.A
Company Name
Caprari S.p.A
Address
Via Emilia, Ovest 900, 41123 Modena
Country
Italy

View All Listings by this Company

Print This Approval


#240404711

Peripheral pump for mains water applications with a brass body and impeller, . The pushfit connections on the hoses are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 6.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240404711
Size:
Pump body: ¾” BSP (M). Inlet and outlet hoses: 15mm pushfit.
Marking:
Mains boost, manufacturer’s address, www.stuart-turner.co.uk and other technical information printed on body. Two adhesive labels on body, one with serial no., the other includes the part no. and other technical information.
Installation Requirements:
R001 R007 R009
Expiry date:
30/04/2029
Model:
47708 STORMBOOST, 44995 STORMBOOST.
Product Images

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval


#240402035

Range of chromium plated brass shower outlets, shower arms and ceiling connectors. Model 26 034 xxx is supplied with a shower arm, and model 26 035 xxx is supplied with a ceiling connector. Maximum operating temperature 60.0°C. Open outlet use only.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240402035
Size:
Overhead shower - ½” BSP (F). Connectors and arms - ½” BSP (M).
Marking:
Axor on shower face.
Installation Requirements:
R001 R040
Expiry date:
30/04/2029
Model:
26 034 xxx 26 035 xxx 30 247 118 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240402036

Range of overhead shower outlets with chrome plated plastic bodies. The inlets incorporate a flow regulator. Maximum operating temperature 60.0°C Open outlet use only.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240402036
Size:
Stainless steel braided TPSIV lined hose incorporating 1/2" BSP (F) captive nut and 1/2" BSP (M) connections.
Marking:
Hansgrohe on shower face.
Installation Requirements:
R001 R040
Expiry date:
30/04/2029
Model:
26 252 xx0 26 253 xx0 26 254 180 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240408002

Range of shower handsets with plated plastic bodies (various finishes). The inlet incorporates a plastic strainer. Maximum operating temperature 60ºC.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240408002
Size:
½” BSP (M).
Marking:
Hansgrohe and Crometta on handle.
Installation Requirements:
R001 R040
Expiry date:
30/04/2029
Model:
26 330 XXX, 26 331 XXX, 26 332 XXX, 26 333 XXX, 26 334 XXX, 26 336 XXX. Models added April 2025: 26 090 xx0, 26 340 xx0.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240404029

Range of shower outlets with plastic bodies (various finishes). Model 100184782 has flow regulator at the inlet and a shower arm. Maximum working pressure: open outlet. Maximum operating temperature: 70°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240404029
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
Backplate etched with Porcelanosa and bottom of handsets etched with NK Porcelanosa.
Installation Requirements:
R001 R040
Expiry date:
30/04/2029
Model:
100184782 - TONO SHOWERHEAD 400MM CHROME, 100038634 - COTA HANDSHOWER CHROME, 100213273 COTA HANDSHOWER CHROME BLACK.
Product Images

Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
CV-20 Km2 VILA-REAL CASTELLON
Postcode
12540
Country
Spain
General Email
certificaciones@noken.com

View All Listings by this Company
Manufacturer:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
CV-20 Km2 VILA-REAL CASTELLON
Postcode
12540
Country
Spain
General Email
certificaciones@noken.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 400 of 625

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.