Range of single hole, double outlet (fixed) combination tap assemblies (various finishes) with electronically controlled functions to allow the tap to dispense boiling water, chilled water or sparkling water from under counter units (not supplied). All models incorporate a separate vent outlet within the tap spout for the near-boiling water circuit. Near-boiling circuit has a maximum operating temperature 98°C. Hot-water circuit has a maximum operating temperature of 65°C.

Section:

0683 Combination Tap Assemblies

Section Subtitle:

Multiple Function tap(s). In addition to normal tap function includes at least one of following functions chilled, filtered, carbonated, instantaneous hot water.

WRAS Approval Number:

250602049

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only. No flow control device, ‘control centre’ or under-counter units are included as part of this approval. R160 applies to the sparkling water connection only.

Size:

6.35mm LLDPE pipe/ silicone flexible pipe ID 7.7mm x OD 10.95mm

Marking:

Zip logo on tap body.

Installation Requirements:

R001 R006 R009 R010 R160

Expiry date:

30/06/2030

Model:

Chilled water only: 91521 HydroTap Classic Chilled Bright Chrome, 91589 HydroTap Classic Chilled Brushed Chrome, 91591 HydroTap Classic Chilled Matt Black, 91611 HydroTap Wave Chilled Bright Chrome, 91623 HydroTap Classic Plus Chilled Bright Chrome, 91623Z01 HydroTap Classic Plus Chilled Brushed Chrome, 91623Z03 HydroTap Classic Plus Chilled Matt Black. Boiling water only: 91517 HydroTap Classic Boiling Bright Chrome, 91583 HydroTap Classic Boiling Brushed Chrome, 91585 HydroTap Classic Boiling Matt Black, 91607 HydroTap Wave Boiling Bright Chrome, 91619 HydroTap Classic Plus Boiling Bright Chrome, 91619Z01 HydroTap Classic Plus Boiling Brushed Chrome, 91619Z03 HydroTap Classic Plus Boiling Matt Black. Boiling & ambient water: 91518 HydroTap Classic Boiling Ambient Bright Chrome, 91586 HydroTap Classic Boiling Ambient Brushed Chrome, 91588 HydroTap Classic Boiling Ambient Matt Black, 91608 HydroTap Wave Boiling Ambient Bright Chrome, 91620 HydroTap Classic Plus Boiling Ambient Bright Chrome, 91620Z01 HydroTap Classic Plus Boiling Ambient Brushed Chrome, 91620Z03 HydroTap Classic Plus Boiling Ambient Matt Black. Boiling & chilled water: 95272 HydroTap Classic Boiling Chilled Bright Chrome, 91569 HydroTap Classic Boiling Chilled Brushed Chrome, 91582 HydroTap Classic Boiling Chilled Matt Black, 91609Z00 HydroTap Wave Boiling Chilled Bright Chrome, 91609Z03 HydroTap Wave Boiling Chilled Matt Black, 91621Z00 HydroTap Classic Plus Boiling Chilled Bright Chrome, 91621Z01 HydroTap Classic Plus Boiling Chilled Brushed Chrome, 91621Z03 HydroTap Classic Plus Boiling Chilled Matt Black, 91621Z05 HydroTap Classic Plus Boiling Chilled Brushed Rose Gold, 91621Z07 HydroTap Classic Plus Boiling Chilled Brushed Gold, 91621Z11 HydroTap Classic Plus Boiling Chilled Brushed Nickel. Boiling, chilled & sparkling water: 91520 HydroTap Classic Boiling Chilled Sparkling Bright Chrome, 91566 HydroTap Classic Boiling Chilled Sparkling Brushed Chrome, 91581 HydroTap Classic Boiling Chilled Sparkling Matt Black, 91610 HydroTap Wave Boiling Chilled Sparkling Bright Chrome, 91610Z03 HydroTap Wave Boiling Chilled Sparkling Matt Black, 91622 HydroTap Classic Plus Boiling Chilled Sparkling Bright Chrome, 91622Z01 HydroTap Classic Plus Boiling Chilled Sparkling Brushed Chrome, 91622Z03 HydroTap Classic Plus Boiling Chilled Sparkling Matt Black, 91622Z07 HydroTap Classic Plus Boiling Chilled Sparkling Brushed Gold, 91622Z09 HydroTap Classic Plus Boiling Chilled Sparkling Gunmetal, 91622Z11 HydroTap Classic Plus Boiling Chilled Sparkling Brushed Nickel. Chilled & sparkling water: 91522 HydroTap Classic Chilled Sparkling Bright Chrome, 91592 HydroTap Classic Chilled Sparkling Brushed Chrome, 91594 HydroTap Classic Chilled Sparkling Matt Black, 91612 HydroTap Wave Chilled Sparkling Bright Chrome, 91624Z00 HydroTap Classic Plus Chilled Sparkling Bright Chrome, 91624Z01 HydroTap Classic Plus Chilled Sparkling Brushed Chrome, 91624Z03 HydroTap Classic Plus Chilled Sparkling Matt Black. Models added October 2025: Boiling & chilled water: 90887 HydroTap Boiling Chilled 2 Button Top Touch Industrial Tap, 90835 HydroTap 3 Button Industrial Side Touch Tap Boiling Chilled with safety button.

Approval Holder:

Zip Heaters UK Ltd T/A Zip Water UK

Company Name

Zip Heaters UK Ltd T/A Zip Water UK

Address

Trafalgar House, Trafalgar Business Park, Dereham

Postcode

NR19 1JG

Country

United Kingdom

Phone

0345 600 5005

General Email

sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Manufacturer:

Zip Industries (Aust) Pty Ltd.

Company Name

Zip Industries (Aust) Pty Ltd.

Address

67 Allingham Street Condell Park NSW 2200

Country

Australia

General Email

View All Listings by this Company

Range of side entry BS1212-4 (2016), delayed action or non-delayed action type float operated valves for WC flushing cisterns. The inlet incorporates an optional flow restrictor. Maximum working pressure 10.0 Bar Maximum operating temperature Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

251102002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Model B3230 can be supplied with either a brass or plastic ½” connection, a plastic 3/8” connection and either delayed or non-delayed action type float valve.

Size:

3/8” BSP (M) 1/2” BSP (M) (brass or plastic inlet connection)

Marking:

WDI, Model number, WRAS, BS1212-4 and datum level on valve body

Installation Requirements:

R001 R550

Expiry date:

30/11/2030

Model:

B3230

Manufacturer:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 Bar. Cold water use only

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

250602712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

My life, Wras and model number on cistern, 6 Litre mark inside cistern.

Installation Requirements:

R001 R280 R556 R581

Expiry date:

30/06/2030

Model:

MLSOLCC

Approval Holder:

MyLife Bathrooms Limited

Company Name

MyLife Bathrooms Limited

Address

Greenbank Industrial Estate Rampart Road Newry

Postcode

BT34 2QU

Country

United Kingdom

Phone

07835115808

General Email

cahal.lynch@mylifebathrooms.com

View All Listings by this Company

Range of hand showers and shower arm kits with (brass bodies - various finishes. The inlets of the hand showers and the inlet elbows incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Open outlet use only. Maximum operating temperature 65°C.

Section:

1670 Shower Outlets

Section Subtitle:

Shower kit(s)

WRAS Approval Number:

250602017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2" BSP female (with a ½” BSPP male adaptor for international use) for hand showers. 1/2" NPT male for shower arm.

Marking:

Waterworks logo on handset (BHS010, HNHS010 & CNHS10) Waterworks on escutcheon (BHS010 & BSH001CO)

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

Hand Showers: BHS010XZZ BHS010ZZ HNHS010ZZ CNHS10ZZ Shower Arm: BSH001XZZ Where XX denotes the finish and can be replaced by: AC = Antique Copper AB = Architectural Bronze AQB = Antique Brass BZ = Architectural Bronze C = Polished Chrome CO = Concordia DN = Dark Nickel G = Gold L = Lumin M = Matte Nickel MC = Matte Chrome MG = Matte Gold MS = Matte Silver N = Polished Nickel S = Silver SC = Shiny Copper SO = Sovereign UB = Unlacquered Brass Where XX denotes the handle components and can be replaced by: 0 = Less Handles 1 = Cross Handle 2 = Two‐Tone Cross Handle 3 = Coin Edge Cross Handle 10 = Solo Series Lever Handle 11 = Lever Handle 12 = Two‐Tone Lever Handle 13 = Coin Edge Lever Handle 14 = Walnut Lever Handle 15 = Leather Lever Handle 20 = Solo Series Straight Lever Handle 2A = Tandem Series Guilloche Lines Lever Handle 2B = Tandem Series Two‐Tone Lever Handle 2C = Union Series Guilloche Link Lever Handle 2D = Union Series Enamel Guilloche Lines Lever Handle 2E = Union Series Guilloche Pinstripe Lever Handle 2P = Solo Series Two‐Piece Straight Lever Handle 2S = Bond Rally Series Lever Handle 2T = Teak Lever Handle 30 = Solo Series Knob Handle 3S = Bond Rally Series Knob Handle 4A = Tandem Series Guilloche Lines Knob Handle 4B = Tandem Series Two‐Tone Guilloche Knob Handle 4D = Union Series Enamel Guilloche Lines Knob Handle 5C = Union Series Guilloche Link Knob Handle 7A = Tandem Series Guiloche Lines Lever handles with Gland Cover 7B = Tandem Series Two Tone Lever handles with Gland Cover 7C = Union Series Guiloche Link Lever handles with Gland Cover 7D = Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E = Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P = Solo Series Two Piece Straight Lever handle with Gland Cover 7S = Bond Rally Series Lever Handle With Gland Cover 7T = Tandem Series Teak lever with Gland Cover 8Z = Straight Lever Handle 90 = Solo Series Straight Lever handles with Gland Cover

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London

Postcode

WC1N2EB

Country

United Kingdom

View All Listings by this Company

Range of in-line, non-verifiable single check valve assemblies with DZR brass bodies and spring loaded, resilient trim check valve cartridges. For use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Section:

0030 Backflow Prevention Devices

Section Subtitle:

Non-verifiable single check valve assembly - Type EB. Providing Fluid Category 2 protection. Verified by test.

WRAS Approval Number:

250702704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm - 28mm compression

Marking:

Zhejiang Valogin Technology V & G logo, CR, flow arrow and WRAS on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

12.10342.015.CP5R-8511 (15mm compression). 12.10342.022.CP5R-8511 (22mm compression). 12.10342.028.CP5R-8511(28mm compression).

Approval Holder:

Zhejiang Valogin Technology Co Ltd

Company Name

Zhejiang Valogin Technology Co Ltd

Address

Qinggang Technological Ind. Zone, Yuhuan, Taizhou Zhejiang

Country

China

Phone

+86 (0)574 8907 1560

View All Listings by this Company