Directory Search Results

Print List

#2101522

'Dicoat Medium Temp Black'. Factory applied, black coloured bitumen coating. Apply as per manufacturer's user instructions reference 'SPL/RD/UI/2019100121', issue no. '01' dated 08.07.2020. Cure for 7 days@30°C. Between 1st January 2021 to 22nd November 2021, the material is for use with water up to 50°C. Between 23rd November 2021 and 31st January 2026, the material is for use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5021 Bituminous Based Products
Section Subtitle:
Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:
2101522
Expiry date:
31/01/2026

Approval Holder:
Shalimar Paints Limited
Company Name
Shalimar Paints Limited
Address
Nashik Mumbai NH Road, Gonde, Nashik, Maharashtra 422403
Country
India

View All Listings by this Company

Print This Approval


#2101515

'RS-0004'. White coloured, compression moulded seal ring manufactured from 'ADR 96' ceramic material. For use with water up to 85°C.

Section:
5023 Ceramic
Expiry date:
31/01/2026

Approval Holder:
CoorsTek Advanced Materials Turnov s.r.o.
Company Name
CoorsTek Advanced Materials Turnov s.r.o.
Address
Za Viaduktem 2150 511 01 Turnov
Country
Czech Republic

View All Listings by this Company

Print This Approval


#2102505

'H-3500-6351-9221'. Grey coloured silicon carbide washers manufactured by isotactic pressing, sintering and grinding. For use with water up to 85°C.

Section:
5023 Ceramic
Expiry date:
28/02/2026

Approval Holder:
John Crane
Company Name
John Crane
Address
29 Burdent Dr. #31, Crystal Lake, IL 60014
Country
United States

View All Listings by this Company

Print This Approval


#2101523

'High Build Solvent Free Epoxy Coating Red'. Factory applied, red coloured epoxy coating. Apply as per manufacturer's user instructions reference 'SPL/RD/UI/202006119', issue no, '01' dated 20.08.2020. Cure for 24 hours@30°C. For use with water up to 50°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2101523
Expiry date:
31/01/2026

Approval Holder:
Shalimar Paints Limited
Company Name
Shalimar Paints Limited
Address
Nashik Mumbai NH Road, Gonde, Nashik, Maharashtra 422403
Country
India

View All Listings by this Company

Print This Approval


#2101530

'Jotaguard VA 5001. Factory applied, blue coloured epoxy coating. Apply as per manufacturer's TDS dated '9 November 2015'. Cure for 210 seconds@200°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2101530
Expiry date:
31/01/2026

Approval Holder:
Jotun Coatings (Zhangjiagang) Co. Ltd.
Company Name
Jotun Coatings (Zhangjiagang) Co. Ltd.
Address
Floor 20, Jiu Shi Mansions, No. 28 Zhongshan Road (South), Shanghaim 200010
Country
China

View All Listings by this Company

Print This Approval


#2102506

'SRC RZ S&M&BDN 20'. Factory applied, grey coloured sulphate resistant cement mortar. Mix cement and sand in a 1:2.2 mass ratio. Combine that mix and water in a 1:0.45 mass ratio. Cure for 24 hours@25°C and 95% relative humidity. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2102506
Expiry date:
28/02/2026

Approval Holder:
Saint-Gobain PAM China
Company Name
Saint-Gobain PAM China
Address
Huagong Road, Cihu District, Ma'ansh City, Anhui Province
Country
China

View All Listings by this Company

Print This Approval


#2012551

'EP01'. Factory applied, blue coloured epoxy powder coating. Apply and cure as per manufacturer's instructions 'V6.3' issued March 2019. For use with water up to 65°C.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2012551
Expiry date:
31/12/2025

Approval Holder:
Qingyuan Duraton Advanced Materials Co. Ltd.
Company Name
Qingyuan Duraton Advanced Materials Co. Ltd.
Address
#9, Zhiyuan Road, Guangzhou (Qingyuan) Industrial Transmission Park, Qingcheng, Qingyuan City, Guangdong
Country
China

View All Listings by this Company

Print This Approval


#2102517

'Intercrete 4807'. Site applied, grey coloured cementitious repair mortar. Mix 'Intercrete 4807' and water in a mass ratio of 9.4:1 Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5063 Concrete, Cement and Mortar
Section Subtitle:
Repair materials. High humidity of 80% to 95% is required when curing cementitious materials.
WRAS Approval Number:
2102517
Expiry date:
28/02/2026

Approval Holder:
Flexcrete Technologies Ltd.
Company Name
Flexcrete Technologies Ltd.
Address
Tomlinson Road, Leyland, Lancashire
Postcode
PR25 2DY
Phone
0845 2607005
General Email
Info@flexcrete.com

View All Listings by this Company

Print This Approval


#2102507

'Celanyl A3 WR GF30 BK 9005/Z/FA'. Black coloured, injection moulded PA material. For use with water up to 85°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2102507
Expiry date:
28/02/2026

Approval Holder:
Celanese Sales Germany GmbH
Company Name
Celanese Sales Germany GmbH
Address
Am Unisys Park 1, 65843 Sulzbach am Taunus
Country
Germany

View All Listings by this Company

Print This Approval


#2010563

'MMP PE100 Pipe'. Black coloured (with blue coloured external stripes), extruded PE100 pipes manufactured from 'Sabic P6006' or 'Borouge HE3490-LS'. For use with water up to 85°C.

Section:
5240 Polyethylene
Section Subtitle:
Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:
2010563
Expiry date:
31/10/2025

Approval Holder:
Al Munif Pipe.
Company Name
Al Munif Pipe.
Address
Blk. 201 - 212 Sulay District Forzan Industrial Zone Riyadh
Country
11389

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 40 of 407

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.