Directory Search Results

Print List

#250402049

Leak detection system, comprising of a flow sensor with a stainless-steel body incorporating a motorised spherical valve, with a stainless-steel ball. Please note that claims of leak detection have not been verified by WRAS. Maximum working pressure 15.0 bar. Maximum operating temperature 85°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
250402049
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Please note that claims of leak detection have not been verified by WRAS.
Size:
¾” BSP (M) inlet and outlet.
Marking:
HLP-4 on valve body.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
9015-B.
Product Images

Approval Holder:
Harrison Land & Property Ltd.
Company Name
Harrison Land & Property Ltd.
Address
11-12 Hallmark Trading Centre, Fourth Way, Wembley, Middlesex
Postcode
HA9 0LB.
Country
United Kingdom

View All Listings by this Company

Print This Approval


#250402710

Range of installation kits comprising of a water block, double check valve assembly (suitable for backflow protection against fluid category 3) and a pressure reducing valve (outlet pressure range 3.0 to 3.5 bar). Model 95428 incorporates a water filter. Maximum working pressure: 16 Bar Maximum operating temperature: 23°C

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
250402710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
There are two Installation Kits for the InstaTap Range, the InstaTap Installation kit that supports boiling, boiling and chilled and the Chilled Only InstaTap Installation Kit. These kits include an install rail that is a combination of double check valves, water block and prv, this acts as the product’s backflow prevention. They also include the fittings required to fit the install rail to the mains inlet into the InstaTap. The Chilled Only kit includes a filter
Size:
see model
Marking:
Zip on water block, Zip, product info on filter
Installation Requirements:
R001 R008 R170 R290
Expiry date:
30/04/2030
Model:
95201: Chilled Install Rail (15mm spigot x ¾” BSP F) 95565: Install Rail (15mm spigot x ¾” BSP M) PRV – Art.232.991: Pressure Reducing Valve (3/4” (F) x ¾” BSP M)) 95428: Chilled InstaTap Installation Kit (15mm spigot x ¾” BSP F) 95402: InstaTap Installation Kit (15mm spigot x ¾” BSP F)
Product Images

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Country
United Kingdom
Phone
0345 600 5005
General Email
sebastian.ducker@zipwater.co.uk

View All Listings by this Company
Manufacturer:
Instanta Ltd
Company Name
Instanta Ltd
Address
Canning Road Industrial Estate Canning Road Southport Merseyside
Postcode
PR9 7SN
Phone
01704 501114
General Email

View All Listings by this Company

Print This Approval


#250302718

Range of multistage centrifugal pumps with stainless steel impellers, intermediate chambers, shaft and outer sleeve. The Movitec VME models and VE/VSE models added May 2025 can also incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressures: Existing models: Comeo C models 10.0 bar, Movitec VM models with an oval flange or VME models with integral check valve 16.0 bar, All other Movitec VM models 25.0 bar. Models added May 2025: Movitec V/VS models with an oval flange or VE models with integral check valve 16.0 bar, All other Movitec V/VS models and Movitec HI/HSI models 25.0 bar. Maximum operating temperatures: Existing models: Comeo C and Movitec VME models with integral check valve 60°C, all other model variants 100°C. Models added May 2025: Movitec VE models with integral check valve 60°C, all other model variants 100°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250302718
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Movitec VM (-/F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. Comeo C 2/4/6 B: 1¼” BSP (F) inlet x 1” BSP (F) outlet. Sizes added May 2025: Movitec V/VS (-/F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. Movitec V/VS (-/F/E/V/T) 10 B/15 B/15 C: Oval flange: DN40, DN50. Round flange: DN40, DN50. External threaded: 1½” BSP (M), Victaulic: DN50 and Tri-clamp: DN50. Movitec V/VS F 25/40/60/90/125 B: Round flange: DN65, DN80, DN100, DN125. Movitec HI/HSI 2/4/6 B: 1¼” BSP or NPT (F). Movitec HI/HSI 10/15 B: 2” BSP or NPT (F).
Marking:
KSB logo, model name, PN, WRAS and technical information on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
31/03/2030
Model:
Movitec VM (-/F/E/V/T) x yy B, Comeo C x yy B. Where: VM = Vertically oriented (AISI 304) with close coupled motor/ pump (pump/ motor shaft combined). No indication (VM only) = oval flange. F (VMF) = round flange. E (VME) = external tread. V (VMV) = Victaulic. T (VMT) = Triclamp. x = flow rate m³/h (2, 4 or 6). yy = no. of stages Movitec VM and Comeo C ranges 1-6 stages. Models added May 2025: Movitec V/VS (-/F/E/V/T) x yy B, Movitec V/VS (-/F/E/V/T) 15 yy C. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. No indication (V/VS only) = oval flange. F (VF/VSF) = round flange. E (VE) = external thread. V (VV/VSV) = Victaulic. T (VT/VST) = Triclamp. x = flow rate m³/h (2, 4, 6, 10, 15). yy = no. of stages Movitec V/VS……2 B 1-30 stages. Movitec V/VS……4/6 B 1-26 stages. Movitec V/VS……10 B 1-21 stages. Movitec V/VS……15 B/C 1-17 stages. -------------------------------------- Movitec V/VS F xx yy B. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. F (VF/VSF) = round flange. x = flow rate m³/h (25, 40, 60, 90 or 125). yy = no. of stages Movitec V/VS……25 B 1-12 stages. Movitec V/VS……40/60 B 1-10 stages. Movitec V/VS……90 B 1-6 stages. Movitec V/VS……125 B 1-4 stages. -------------------------------------- Movitec HI/HSI x yy B, Movitec HI/HSI 15 yy C. Where: H = Vertically oriented (AISI 304). HS = Vertically oriented (AISI 316). I = Inner thread connection. x = flow rate m³/h (2, 4, 6, 10 or 15). yy = no. of stages Movitec HI/HSI 2/4/6 B 1-14 stages. Movitec HI/HSI 10 B/15 B/15 C 1-8 stages.
Product Images

Approval Holder:
KSB Manufacturing B.V.
Company Name
KSB Manufacturing B.V.
Address
Kalkovenweg 13 2401LI Alphen Aan Den Rijn
Country
Netherlands

View All Listings by this Company

Print This Approval


#250404710

Permanent magnet multi-stage centrifugal pump with a plastic body. The product is supplied with brass adaptors and a copper olive to convert to compression. The compression connections are for use with Irish copper pipe (manufactured to EN1057) (27.4mm size) and copper pipe (manufactured to EN1057) (28mm size). Maximum working pressure 8.0 bar. Maximum operating temperature 90°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250404710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1” BSP (F) (pump body). 27.4mm or 28mm compresson (adaptors).
Marking:
SHIMGE on body
Installation Requirements:
R001 R415
Expiry date:
30/04/2030
Model:
CA600
Product Images

Approval Holder:
Shimge Pump Industry (Zhejiang)Co.,Ltd.
Company Name
Shimge Pump Industry (Zhejiang)Co.,Ltd.
Address
No.3 Bihai Street, Eastern New Area, Wenling City, Taizou City Zhejiang Province.
Country
China
Phone
86 17614582624
General Email
pangxiyuan@shimge.com

View All Listings by this Company

Print This Approval


#250402015

Range of shower sets incorporating either a wall elbow or wall elbow with hand shower, (chromium plated brass). The shower holder incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use only Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250402015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP M
Marking:
28490660 & 28490970 - Dornbracht logo on wall cover 27802660, 27802970 & 27803660 - Dornbracht logo on wall cover. Dornbracht logo on shower handset
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
27802660 27802970 27803660 28490660 28490970 Alternative cover plates 2780xYYY – complete shower sets 28490xxx – wall elbows only (part of article 2780xYYY)
Product Images

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#250602003

Range of, wall mounted shower outlets (chromium plated brass). Inlets incorporate a plastic flow regulator. Open outlet Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250602003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP M
Marking:
Dornbracht logo on front of body
Installation Requirements:
R001 R040
Expiry date:
30/06/2030
Model:
36512979 36513979

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#250602004

Range of wall mounted (chromium plated brass bodies) spray outlets, incorporating a plastic flow regulator at the inlet and a plastic aerator. Open outlet use only. Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250602004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Dornbracht on face plate
Installation Requirements:
R001 R040
Expiry date:
30/06/2030
Model:
36514979

Manufacturer:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0

View All Listings by this Company

Print This Approval


#250404023

Range of shower outlets, (plastic bodies - chrome plated) incorporating a plastic flow regulator. Products 24 540 xx0, 24 541 xx0, 24 550 xx0, 24 551 xx0 to be installed together with 24 573 180 Hansgrohe Raindance Alive Basic set. Maximum operating temperature 60°C. Open outlet use only.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250404023
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only. Products 24 540 xx0, 24 541 xx0, 24 550 xx0, 24 551 xx0, 24 523 xx0 to be installed together with 24 573 180 Hansgrohe Raindance Alive Basic set.
Marking:
Hansgrohe on face plate
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
24 520 XX0 24 521 XX0 24 530 XX0 24 531 XX0 24 540 XX0 24 541 XX0 24 550 XX0 24 551 XX0 24 573 180 300190XX 300191XX 300193XX 300194XX 310190XX 310193XX 310194XX 340190XX 340191XX Model added May 2025: 24 523 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#250102012

Range of In-line Y patterned strainers with ductle iron bodies (blue epoxy powder coated) and stainless-steel mesh. Maximum working pressure: 16 Bar Maximum operating temperature: 85 °C

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400 and DN500 flanged connections
Marking:
VIR, model and technical information on metal dataplate on body DN, PN and Flow arrow on body
Installation Requirements:
R001 R120
Expiry date:
31/01/2030
Model:
895

Approval Holder:
VIR Valvoindustria Ing. Rizzio S.p.A.
Company Name
VIR Valvoindustria Ing. Rizzio S.p.A.
Address
Via Circonvallazione n. 10, 13018 Valduggia (VC)
Country
Italy

View All Listings by this Company

Print This Approval


#250408007

Range of in-line Y patterned strainers with bronze bodies and a stainless-steel mesh strainer. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:
1715 Strainers
WRAS Approval Number:
250408007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
D296 is BSPT and D296AT is NPT
Size:
See model.
Marking:
Crane, Model, WRAS & technical information on data plate on body. Size, PN, DN and flow arrow body
Installation Requirements:
R001 R120
Expiry date:
30/04/2030
Model:
D296 ½” / D296AT ½”: ½" BSP, BSPP and NPT (F), D296 ¾” / D296AT ¾”: ¾" BSP, BSPP and NPT (F), D296 1” / D296AT 1”: 1" BSP, BSPP and NPT (F), D296 1 ¼” / D296AT 1 ¼”: 1¼" BSP, BSPP and NPT (F), D296 1 ½” / D296AT 1 ½”: 1½" BSP, BSPP and NPT (F), D296 2” / D296AT 2”: 2" BSP, BSPP and NPT (F).

Approval Holder:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Country
United Kingdom
Phone
01473 277 364
General Email
tturner@cranebsu.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 373 of 429

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.