Range of multistage centrifugal pumps, with stainless steel bodies (CRN models) or black coloured cataphoretic electrodeposition coated cast iron bodies (CR models), stainless steel sleeve and impellers. The products can be supplied with or without a sensor. Maximum working pressures (no. of stages in brackets): CR/CRN 95 (1-5): 16.0 bar. CR/CRN 95 (6-8): 25.0 bar. CRN 95 (9-12): 40.0 bar. CR/CRN 125 (1-4): 16.0 bar. CR 125 (5): 25.0 bar. CRN 125 (6-7): 25.0 bar. CRN 125 (8-12): 40.0 bar. CR 155 (1-4): 16.0 bar. CRN 155 (1-4): 16.0 bar. CRN 155 (5-6): 25.0 bar. CRN 155 (7-11): 40.0 bar. CR/CRN 185 (1-3): 16.0 bar. CR/CRN 185 (4-5): 25.0 bar. CR/CRN 185 (6-8): 40.0 bar. CR/CRN 215 (1-3): 16.0 bar. CR/CRN 215 (4-5): 25.0 bar. CR/CRN 215 (6-7): 40.0 bar. CR/CRN 255 (1-3): 16.0 bar. CR/CRN 255 (3-4): 25.0 bar. CR/CRN 255 (5-6): 40.0 bar. When a sensor is incorporated the maximum working pressure is as follows: 25.0 bar with either the IPS44 or VTU sensor, (unless they are used on a pump with a maximum working pressure of 16.0 bar, in this instance the lesser pressure applies). The MBS3000 sensor can be used on all models, the pump maximum working pressure applies. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2310916

Size:

CR/CRN(E) 95 models: DN100 inlets/outlets, CR/CRN(E) 125 & CR/CRN(E) 155 models: DN150 inlets/outlets, CR/CRN(E) 185, CR/CRN(E) 215 & CR/CRN(E) 255 models: DN200 inlets/outlets. CRN(E) 95 models: PJE 4” inlets/outlets, CRN(E) 125 & CRN(E) 155 models: PJE 6” inlets/outlets, CRN(E) 185, CRN(E) 215 & CRN(E) 255 models: PJE 8” inlets/outlets.

Marking:

Grundfos logo, type, model, Prod/Ver no., technical info and manufacturing/assembly country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

31/10/2028

Model:

Model key code: CR/CRN (E) AA-B-C-D-E-F-G-XXXX Where: CR = Pump type and Cast Iron. CRN = Pump type and EN 1.4401. E = Preminum Electronically Controlled Motor (CR /CRN 95 -125 models only). AA: Flow rate [m³/h] - 95 / 125 / 155 / 185 / 215 / 255. B: Number of impellers – dependent on model (1-12). C: Number of reduced diameter impellers - 0 / 1 / 2 / 3 / 4. D: Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, T = Trust handling device, V = Cascade function, X = Special version*, Z = Pump with bearing flange. E: Code for pipe connection: F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (CRN models only). F: Code for materials: A = Basic version, C = Carbon-free pump, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, P = PEEK neck ring, Q = Silicon carbide/silicon carbide bearing in pump and silicon carbide/silicon carbide seal faces in thrust handling device, R = Silicone carbide /silicone carbide bearing, T = Baseplate EN 1.4408, U = Silicon carbide/silicon carbide bearing in pump and silicon carbide/tungsten carbide seal faces in thrust handling device, W = Tungsten carbide/tungsten carbide, X = Special*. G: Code for rubber parts: E = EPDM, V = FKM. XXXX: Code for shaft seal: HQQx, HUUx, HUBx, HQBx. Where: H = Balanced cartridge seal with O-ring B = Carbon, synthetic resin-impregnated U = Cemented tungsten carbide Q = Silicon carbide x can = E or V for rubber parts: E = EPDM, V = FKM. *Special version ONLY covers the situation where more than 4 options are selected within the same position.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of shower handsets with (plastic bodies - various finishes). The inlets incorporate a plastic flow restrictor. Maximum operating temperature 60.0°C Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2309055

Size:

½” BSP (M)

Marking:

Ideal Standard on body

Installation Requirements:

R001 R040

Expiry date:

30/09/2028

Model:

A7896AA A7896A2 A7896A5 A7896GN A7896XG B953144AA B953144A2 B953144A5 B953144GN B953144XG A7895AA A7896**and B953144** are 3 functions hand showers. All models have same structures and same materials in contact with water. The difference between the A7896**and B953144** is only package. The package of A7896** is colour box packing and B953144** is white box packing. “**” indicates different finishes AA: Chrome A2: Brushed gold A5: Magnetic grey GN: Silver Storm XG: Silk black A7895AA is a single function hand shower. Chrome finish.

Approval Holder:

Ideal Standard (UK) Ltd

Company Name

Ideal Standard (UK) Ltd

Address

Old Road (Lodge 1) Armitage, Rugeley, Staffordshire

Postcode

WS15 4BT

Country

United Kingdom

General Email

tyeomans@idealstandard.co.uk

View All Listings by this Company

Range of shower outlets with brass bodies (various finishes). The products incorporate a stainless-steel strainer and flow regulator. Open outlet use.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2310023

Size:

1/2" BSP (M).

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2028

Model:

26 238 xxx - Hansgrohe Raindance E 300 Air 1jet overhead shower with shower arm 390 mm. 26 239 xxx - Hansgrohe Raindance E 300 Air 1jet overhead shower with shower arm 390 mm EcoSmart 9 l/min. 26 250 xxx - Hansgrohe Raindance E 300 Air 1jet overhead shower with ceiling connector 100 mm. 26 251 xxx - Hansgrohe Raindance E 300 Air 1jet overhead shower with ceiling connector 100 mm EcoSmart 9 l/min. Model added June 2025: 322176xx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of shower handsets and shower kits with chromium plated ABS bodies. Some models incorporate a shower hose.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2310068

Size:

½” BSP M

Marking:

Mira logo on handset

Installation Requirements:

R001 R040

Expiry date:

31/10/2028

Model:

36321W-CP MIRA ZEST HANDSET & HOSE / Inlet size 1/2" male BSP 36323W-CP MIRA ZEST HANDSET & FITTINGS / Inlet size 1/2" male BSP 39170W-CP MIRA ZEST 3M HANDSET / Inlet size 1/2" male BSP 39180W-CP MIRA ZEST HANDSET BULK PACK – RETAIL / Inlet size 1/2" male BSP 36322W-CP MIRA ZEST HANDSET & HOSE – RETAIL / Inlet size 1/2" male BSP 39171W-CP MIRA MOTO HANDSET / Inlet size 1/2" male BSP 39181W-CP MIRA MOTO HANDSET BULK PACK – RETAIL / Inlet size 1/2" male BSP

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of wall mounted shower panels. The flow is controlled via a solenoid valve which is operated via an infrared sensor located at the bottom of the panel. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2310069

Note:

R010 applies to models supplied with hot and cold water:

Size:

½” BSP (M)

Marking:

Delabie on body

Installation Requirements:

R001 R010 R040 R570

Expiry date:

31/10/2028

Model:

Models supplied with pre-mixed water: 714800: SPORTING 2 shower panel 714800DP: SPORTING 2 shower panel, DP outlet 714806: SPORTING 2 shower panel 714806DP: SPORTING 2 shower panel, DP outlet Models supplied with hot and cold water: 714900: SPORTING 2 SECURITHERM shower panel 714900DP: SPORTING 2 SECURITHERM shower panel, DP outlet 714910: SPORTING 2 SECURITHERM shower panel 714910DP: SPORTING 2 SECURITHERM shower panel, DP outlet 714916: SPORTING 2 SECURITHERM shower panel 714916DP: SPORTING 2 SECURITHERM shower panel, DP outlet 714906: SPORTING 2 securitherm shower panel 714906DP: SPORTING 2 securitherm shower panel

Approval Holder:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company